How to make a Christmas tree out of felt. Simple pattern: Christmas tree made of felt and fabric

A beautiful elegant Christmas tree is one of the main symbols new year holidays. small soft Christmas trees from fabric, you can decorate a real forest beauty, use them as elements New Year's decor and gifts. Fabric crafts can be sewn from various fabrics: cotton, linen, wool, fleece, felt. Making a Christmas tree out of felt with your own hands is quite simple for both children and adults.

Small-sized soft crafts in the form of a forest beauty can be made even by the smallest children. This will require a minimum of materials, various decorative elements, bright beautiful threads and, of course, imagination.

A child of 3-4 years old can draw simple patterns of a Christmas tree from felt with his own hands. Their cutting and transfer of silhouettes to fabric, stuffing with filler of voluminous figures can be done by children with the help of adults. The latter is better to take over the work with needles and small details of the decor.

This simple craft does not require the master to work with a thread and a needle. It will be enough to have simple materials and tools:

squares of dense green felt (5 squares of five different sizes);
small brown felt mugs (5-6 pieces);
small buttons in the shape of an asterisk or snowflake;
thin line;
awl.

Cut out squares from half a sheet of thick A4 felt. In the center of each square and brown circle, two holes are pierced with an awl. A piece of fishing line is folded in half, the ends are threaded into the holes of one circle and tied into a knot (so the fishing line will not slip, and its ends will remain even during operation). Then five more circles are strung on the fishing line, forming a tree trunk. The finished part is fixed with a knot. The ends of the fishing line are folded together and squares are put on it in the form of a pyramid, giving them an arbitrary position in relation to each other.

At the top of the craft, a button is fixed in the shape of an asterisk or a snowflake.

A loop is formed from the fishing line, for which the toy can be hung on a Christmas tree or placed in a garland.

Herringbone constructor

You can make a small three-dimensional tree from felt using the technology of a composite designer. For this craft you will need:

thick felt;
decorative elements (small felt circles, beads, beads, buttons, etc.);
scissors;
glue;
narrow braid or ribbon.

Making a composite Christmas craft is very simple. Two identical pieces are cut out of felt. In the center, each part is cut: one from the bottom to the middle, the other from the top to the same point. After that, proceed to decorate the details. Since all sides of the craft will be in sight, the decor elements are fixed with glue. After the glue has completely dried, the parts are interconnected and a textile loop is glued. A voluminous Christmas tree decoration can be hung on a real Christmas tree.

Small stuffed Christmas trees are classic decorations made from felt.

Such crafts are made of medium-density felt and synthetic winterizer. The design of products depends on the taste preferences and imagination of the author.

To make a felt Christmas tree with eyes, decorated with snowflakes, you will need the following materials:

light green felt;
brown felt;
green threads are several tones darker than the fabric;
silver threads;
silver satin ribbon;
small toy eyes;
scissors;
needles;
glue;
sintepon.

Two pieces 10 cm high are cut out of felt. Small snowflakes and eyelash lines on one of them are embroidered with silver threads on both parts. With the help of glue, the eyes are attached to their place. The two parts are folded wrong side to each other, inserting a loop of tape at the top. Then they are sewn together with green thread, leaving a hole for stuffing. A small amount of padding polyester (sufficient to create a small volume) is evenly distributed inside the toy. A strip of brown felt is inserted into the stuffing hole and sewn up. The toy is ready.

Christmas trees for interior decoration

A voluminous Christmas tree made of fabric is suitable for decorating the interior. It is quite easy to draw patterns for such crafts with your own hands. Interior textile Christmas trees can be made using different techniques.

Craft using the tilde technique

In the tilde technique that is fashionable today, you can make not only unique dolls, but also interior items: for example, a Christmas tree. The tilde Christmas tree has smooth lines and a vertically elongated silhouette. For most of these crafts, the top is curved in the form of a cap.

To make a do-it-yourself tilda tree made of fabric, you need:

Making crafts begins with drawing patterns with smooth lines. A sketch of a Christmas tree is transferred onto felt folded in half and two mirror details are cut out.

For decorating a Christmas tree satin ribbons small bows are made that are sewn onto both parts. In random order, the blanks are embroidered with beads.

The decorated parts are folded with the wrong sides inward and sewn together, leaving a small hole for filling the crafts with padding polyester. The filler is evenly distributed over the figure.

A wooden stick is inserted into the stuffing hole and sewn up.

The foam is shaped to match the selected flower pot. The workpiece is smeared with glue and placed in a mold. A hole is made in the center of the foam base and a Christmas tree on a stick is fixed in it with glue.

Cut out a circle from the organza. They put a pot on it, wrap organza around it and fix it on a stick with a ribbon. Decorative Christmas tree-tilde is ready.

Creative Christmas tree made from pillows you can decorate the bedroom. And after the end of the holidays, the elements of the Christmas tree can be used as a decor for a bed or a sofa in the living room. To make a Christmas tree, you can use felt of low density green and white color. You will also need a sewing machine (but you can also sew parts manually), pins, scissors, a rolled padding polyester, thick yellow or red felt.

Work begins with drawing a template. Each pillow is a star with five rays. Each master chooses the number and size of pillows on his own, focusing on his preferences. For example, a product can be made up of six pillows, alternating green and white parts.

The template is transferred to the fabric and two figures of each size are cut out. The details are sewn, turned inside out, the seams are straightened and filled with padding polyester, cut out in the shape of a pillow. The final product is sewn by hand.

A double-sided Velcro for fabric is sewn to each pillow with a few stitches. Use it to assemble a pyramid.

The top is decorated with a fleece stuffed star, which is sewn to the top part.

Manufacturing Christmas decorations based on a cone is a fairly common technique in which they work with many materials: colored paper, napkins, tinsel, and various fabrics. You can sew quite a lot of models of Christmas trees made of felt using the cone technique.

A small craft is made from a piece of thick felt. A piece is cut out of it in the form of 1/3 of a circle. Felt mugs of different colors are glued or sewn onto the unfolded part.

After decorating, the craft is sewn.

From this craft you can make an educational game for the smallest children. To do this, the decor is not sewn onto the enlarged conical base, but hung with Velcro. The assortment of decorations can be varied with flat felt figures of animals (squirrel, bunny, bear, owl, cat, dog), symbols of the New Year holidays (Santa Claus, Snow Maiden, snowman, deer, snowflakes). A variety of decorations depends only on the age of the baby and the imagination of the mother..

Forest beauties from felt- a great alternative to real trees in families with small children. A Christmas tree made of felt on the wall, sewn with your own hands, will not only beautiful part New Year's home decor, but also an entertaining educational game for the baby. The main idea of this product is to make one of the main New Year's symbols as safe and interesting as possible for the child. This idea has many incarnations, appearance which depends on the imagination of the authors.

Flat crafts

The simplest model of wall-mounted developing Christmas trees are flat, one-piece designs. To make them, you need a piece of thick felt about a meter long. In order for the product to look even and neat, a full-size half-tree template is made of cardboard. Cardboard can be replaced with a piece of wallpaper or newspaper, but in this case, when transferring the template to the fabric, it must be secured with pins. The felt is folded in half, the template is circled and the finished part is cut out. Felt details cut with scissors with a curly blade look beautiful.

A mount for toys is sewn to the finished workpiece, which can be:

There are several ways to fix the finished craft on the wall.. The main condition is a reliable fixation, designed for the active actions of the baby.

A self-tapping screw screwed into the wall can act as a fastener. In this case, a hole is made in the upper part of the Christmas tree, a cord is threaded into it, which is hung on the fastener.

If it is not possible to make a hole in the wall, then you can attach the product to the wall with double-sided adhesive tape. Stationery tape is not suitable for this purpose, as it cannot withstand the weight of the structure. Adhesive tape should not be used in rooms whose walls are covered with wallpaper, as after removing the decor, they can come off along with the tape.

Wall-mounted Christmas tree can be attached to the wallpaper with pins. In this case, it is necessary to disguise the attachment points and carefully monitor so that the child does not accidentally prick a needle or swallow it.

Other types of developing Christmas trees

In addition to flat wall-mounted Christmas trees, consisting of one part, more complex educational crafts can be made from felt:

A flat craft, consisting of several parts, is made of dense green and light green felt. The template for this craft is initially drawn with one figure and several separate parts are drawn inside. Then it is cut into pieces and transferred to the fabric. Details should alternate in color. Parts of the felt Christmas tree are cut out and sewn together.
A stuffed Christmas tree made of felt for the wall is made in the same way as its smaller models. But there are some features that are due to the size of the products: the stuffing for the product is cut out according to its shape from a rolled padding polyester; so that the filler does not stray, its corners are sewn to the felt with a few stitches; to fix crafts on the wall, only the method with drilling a hole for a self-tapping screw is suitable.
A stuffed composite Christmas tree is made from several paired parts. To save quite expensive felt, the part adjacent to the wall can be made of cheaper material. They are individually filled with padding polyester, which is necessarily fixed inside the part at several points. Then the parts are sewn together.

Felt Christmas trees are quite easy to make.. They give New Year's interior atmosphere of warmth and comfort. And their creation will make it interesting and entertaining to spend New Year's Eve evenings with the family.

Attention, only TODAY!

The felt Christmas tree is a popular motif for Christmas decorations that is easy to make with your own hands. In this article you will find a pattern and detailed instructions to create such a charming Christmas tree.

For those who prefer MK in video format, below will be given a link to our channel on YouTube video hosting.

For work you will need:

printer for printing a Christmas tree pattern from felt;
felt of medium hardness of light green and dark green colors;
threads in tone;
sharp needle, pins and scissors;
synthetic winterizer and wooden stick for stuffing;
circles of felt or sequins for decoration;
glue "Moment Crystal";
satin ribbon 0.5 cm wide - a small piece for hanging.

How to make a felt Christmas tree:

Print out the pattern and cut out the patterns.
We cut out the elements that are needed in duplicate by folding the felt in half. Do not forget to pin the pattern template with a pin so that the details do not move when cutting. Otherwise, the work will look sloppy.
We put together two paired dark and one light green elements, carefully combine the upper edge and begin to sew with a seam over the edge with a matching thread.
If you plan to hang the toy on a Christmas tree or use it as a keychain, do not forget to insert a piece of satin ribbon as a hanger when stitching.
We sew the light green layer to the upper dark layer of felt with overcasting stitches.
We continue to sew the Christmas tree element from felt around the perimeter. Do not forget to change the thread to match the dark layer and fill the stitched part with synthetic winterizer in small portions.
When the elements are ready, we begin to sew them together.
It is convenient to sew with a hidden seam, first at the back, then at the front, connecting the parts superimposed on each other.
The finished Christmas tree made of felt can be decorated with circles from the leftover felt of bright colors, beads, sequins. Beads are best sewn on, and felt and sequins are glued on.

Shared the master class

Anastasia Kononenko

New Year always associated with the tree. Without this tree, it is simply impossible to imagine the main winter holiday. At the same time, it is not at all necessary to buy a spruce tree, because it is much more interesting to create your own masterpiece. A Christmas tree with your own hands will look very original. In addition, the process of its creation will be fascinating and exciting.

New Year is always associated with a Christmas tree.

In order to make a Christmas tree at home, it is not at all necessary to purchase expensive, some special materials. Beautiful and original trees can be created even from improvised means:

paper;
burlap;
tree;
foamiran;
sweets;
beads;
ribbons;
felt;
wires;
thread.

The list, of course, does not end there. Anything is suitable for such crafts, the main thing is to give freedom to imagination and approach this creative process with enthusiasm.

Gallery: DIY Christmas tree (25 photos)

DIY Christmas tree (video)

How to make a cardboard cone for a homemade Christmas tree

The first thing to start with when creating your own Christmas tree is the base, the cone. You can use any materials, but it will be most convenient to work with cardboard in the future.

There are two ways to make such a cone. The simplest one is already known to many:

a cardboard sheet is folded according to the principle of a paper bag;
cut off a corner;
I glue the resulting cone;
the edges are trimmed.

The second option may seem more complicated, but in fact it is no less simple:

draw a circle on a sheet of cardboard;
divide it into quarters;
one quarter is cut out;
a cone is rolled from the remaining material;
glue it.

If the cone does not stick together, then you can use ordinary clothespins, press them on places that do not want to succumb to glue.

The first thing to start with when creating your own Christmas tree is the base, the cone.

After the cone is ready, it remains only to make the bottom. To do this, you need to put the design on paper and circle the edge, indent about a centimeter and cut out a circle with a large radius, make small cuts and apply glue, and then attach the resulting shape to the cone.

DIY Christmas tree made of felt for the New Year

A decorative Christmas tree made of felt will decorate any home, and can also be original gift for the New Year holidays. For its manufacture you will need the following materials:

a sheet of cardboard;
felt of two colors;
Christmas tinsel;
glue;
scissors.

Work on creating a mini-Christmas tree takes place in several stages:

A cone is made of cardboard and glued together.
Circles of various diameters are cut out of the wind.
Christmas tinsel is glued to the bottom of the cone.
On each circle cut out of felt, cuts are made, but not too large.
Alternately, all the circles are put on the cone, alternating colors.
The crown is decorated with tinsel and fixed with glue.

A decorative Christmas tree made of felt will decorate any home, and can also be an original gift for the New Year holidays.

If desired, a sweet gift can be put inside the resulting Christmas tree.

How to make a Christmas tree from napkins or paper: a master class

Even ordinary napkins can serve as material for a future Christmas tree. For such a craft, you will need the following materials:

napkins (three-layer);
stapler;
a sheet of cardboard;
glue;
pencil;
scissors.

Even ordinary napkins can serve as material for a future Christmas tree.

Armed with everything you need, you can begin the creative process itself;

Circles are drawn on napkins with a pencil and then cut out.
In the central part, the resulting circles are fastened with a stapler.
The top layer of the napkin is folded over and curled in the center.
Thus, all layers are twisted. The result is a beautiful rose.
The same is done with other blanks, original flowers are created.
A cone is twisted from cardboard and glued together.
Roses made from napkins are glued along the bottom of the cone.
Circles are again cut out of napkins, but their diameter should be smaller.
Flowers are again made from the circles and attached to the cone already higher.
Each subsequent row of flowers is made according to the same principle. The main thing is to reduce the diameter of the circles each time.
A flower is also attached to the crown.
Garlands, candies and sparkles are used as decorations.

If the option of making a Christmas tree seemed complicated, then you can resort to using wrapping paper. The paper construction is incredibly simple, even children will not have any difficulties with it. For it you will need the following materials:

a sheet of cardboard;
wrapping;
ordinary tape;
Double-sided tape;
scissors;
decoration.

The creative process goes through several stages:

A cone is made of cardboard and fastened with tape.
The excess parts of the resulting cone are cut off so that the base is even.
Wrapping paper is laid out on the table face down.
With adhesive tape, the tip of the paper is attached to the top of the made cone.
The cone gradually scrolls, thus being wrapped in paper.
When the base is completely wrapped, the excess paper is cut off.
The paper is attached to the base with double-sided tape.
The Christmas tree is decorated with beads.

Christmas tree for kindergarten: ideas

On the eve of the New Year holidays, parents face the difficult task of what kind of crafts to carry this time. Kindergarten or school. In fact, no difficulties can arise, since there are many ideas for the original Christmas tree:

A simple craft can be made from foil, rain and paper. It is enough just to cut out twigs, needles and cones, then attach everything to a cardboard cone, decorate with rain and attach small Christmas decorations.
The bean tree looks no less original, which is simply glued to the base and then painted in golden or silver color, decorated with all kinds of beads, bows and small flowers.
Feather Christmas tree is another creative solution. Small feathers are glued to the beads and attached to a cardboard cone. The crown itself is decorated with a wire star.
The cheapest option is toilet paper. This material is simply crumpled with hands so that the Christmas tree is lush and, without tearing it off the roll, is glued to the cone, painted and decorated with gouache.
For those who have prepared leaves and cones since autumn, the following option is suitable. The cone is simply pasted over with dry leaves so that the tips stick out merrily and sprinkled with foam balls so that there is also snow on the Christmas tree.

Fashion moms will love the shabby chic Christmas tree. For its manufacture, they use burlap, lace and be sure to start fantasizing. Only in this case it will be possible to create a real masterpiece.

DIY Christmas tree from ribbons and balls

An original New Year's composition can be created from ordinary Christmas toys - small unbreakable balls and satin ribbons. In order to start the creative process, you need to arm yourself with everything you need:

balls of different sizes and colors;
foam cone;
glue;
1 meter of satin ribbon;
star or snowflake;
scissors;
wooden skewer.

The process itself is quite simple, it takes place in several stages:

All the balls are alternately glued to the foam cone, larger at the bottom, and smaller at the top. Be sure to alternate colors.
The top is decorated with a star or a snowflake.
Between the balls there are voids that are filled with ribbons. They are cut into squares, put one on one and wound on a wooden skewer.
The tip of the skewer is smeared with glue and thus the ribbons are glued to the foam.

Even more original is a Christmas tree made of satin ribbons. For its manufacture you will need the following materials:

thick colored cardboard;
tapes;
ruler;
scissors;
compass;
small tweezers;
glue;
Christmas tinsel or beads.

An original New Year's composition can be created from ordinary Christmas toys - small unbreakable balls and satin ribbons

The process of creating such a design is incredibly simple:

A cone is made from colored cardboard, glued together.
The tape is cut with the same squares, the edges are singeed so as not to deteriorate.
Each square is folded in half, two edges are brought together and singeed with a lighter.
The result is petals from which flowers are made. Take five petals and glue them together.
Ready-made flowers are glued to the cone.
Beads are glued to the center of each flower.
A bow is made from the remaining ribbon and the crown is decorated with it.

How to make a wire Christmas tree

A decorative Christmas tree can even be made from ordinary wire. For its manufacture you will need the following materials:

thick wire;
stand made of plywood or wood;
thin flexible wire;
Christmas tinsel and toys.

Production is carried out in several stages:

A thick wire is fixed in the center of the stand, forming a "trunk".
A thinner wire is already attached to the resulting base and twisted in a spiral.
The center is pulled out a little.
Tinsel is attached to the made Christmas tree, decorated with toys.

An asterisk is made from the remaining material and fixed at the crown.

Christmas tree made of paper in 1 minute (video)

Making a Christmas tree at home is a simple and exciting process. You can use all improvised materials. Gorgeous creations are made from paper, fabric, cones, and even ordinary wire. Some craftsmen manage to create masterpieces from eggplants, books, small twigs or rulers. In this case, there are no restrictions, just turn on your imagination and completely immerse yourself in the creative process, connect all your loved ones to it. This action will be especially interesting for children who are waiting for the New Year holidays with such lust.

Now it has become very popular to make toys from felt, including New Year's ones. The Christmas tree is a symbol of the New Year, and it can also be made using felt. You can do it, for example, as shown in this video (simple and affordable):

A felt Christmas tree can be voluminous or in a flat format.

Volumetric Christmas tree made of felt

Felt circles can be nailed to the foam base:

You can make a Christmas tree out of scraps of felt if you fix them to the base. Pieces of felt can be green fabric of different shades:

A voluminous Christmas tree can be made in the form of a cone of green felt, fleece or other dense fabric.

You can also assemble a Christmas tree from circles of felt, if you put it on the base and make the largest of the circles from below and the rest above. They can be all green or different colors.

All circles are fixed with wire, on top is a felt ball:

Other examples:

The easiest option is to sew an image by cutting out green felt onto felt of a different color:

You can also sew two pieces of green felt according to the pattern and fill it with filler from the inside:

Cut out two pieces of lka.

Where it is marked in red, this is a slot in the first part, and in the second part, a slot is made from above.

lka is ready.

I have made this Christmas tree many times. Felt is easy to work with, and the product is very beautiful.

I will tell you the easiest way to create a Christmas tree, if you allow.

We draw a Christmas tree on the landscape sheet. Drawing is not difficult, as in childhood, remember? Next, cut out the paper blank. We will have two such details.

Place the pattern on the felt and trace around. Cut and sew.

You can sew parts not only on a typewriter, but also on your hands, as they say. If you use beautiful threads, you can even make the simplest line. But in the case of felt, this is acceptable, it will be beautiful.

Let's leave a couple of centimeters without a line and fill the Christmas tree with padding polyester to add volume.

Such a tree can be put on a wooden leg - a pencil. A flower pot will also come in handy.

Christmas tree toys can be made from felt.

The most New Year's craft- it's a tree.

You need green felt in different shades.

We cut out the details, sew with gold threads, sew on beads, decorate with a ribbon.

You will need two such parts that are connected by a barrel made of brown felt.

Inside, you can sew a bell or a bell, on top - a loop to hang on a green beauty - a Christmas tree.

Another option:

The pattern of the Christmas tree is made double-sided, sewn together with threads, filled with padding polyester or cotton wool and a stick-holder is inserted like a trunk, which is fixed with threads.

The Christmas tree stand is made of cardboard and also glued with green felt. A Christmas tree is inserted into the center, with an adhesive fixative.

We decorate with bows, attach eyes, a smile can be embroidered.

The third version of the Christmas tree:

She is orange, unusual!

And in this video, I will dress up with other felt toys and there is a Christmas tree decorated with buttons.

It is double sided with a loop at the top.

Filler - cotton wool or holofiber.

Have a nice creative flight!!!

On the a photo you can take the idea to your piggy bank.

Also used felt, glue, cardboard, fantasy.

Making a Christmas tree from felt is very simple. Berm cardboard, twist it into a cone and glue it with strips of green felt. Decorate with beads, sequins, sequins. You can glue everything at the moment of the crystal or on the glue gun.

You can also make a Christmas tree from felt according to a template. We cut out a Christmas tree from paper, transfer the pattern to felt. We cut out 2 elements of the Christmas tree and sew them together on a typewriter or by hand, leaving a hole for stuffing with padding polyester. Then we sew up the hole and make a loop out of the thread.

Such a Christmas tree made of felt can be hung on a New Year's bow.

Video master class on making a charming Christmas tree from felt with your own hands.

Such a Christmas tree can be made using the technique wet felting- we cut out a form from laminated cardboard and wrap it with green wool fibers around the workpiece, lay out the fibers in different directions and nail it with soapy water, 10 layers need to be done no less - then we crumple the workpiece, throw it on the table, in general we roll it. When our workpiece has become dense enough - we cut it from the bottom to take out the cardboard, give it the desired shape - then dip it in salt water - squeeze the shape again, come and let it dry. And then you can already sew on rhinestones, and toys are also made of felt, only already felted by dry felting, and all sorts of glitter.

Soft Christmas tree made of felt squares. Cut green felt squares of different sizes, stitch them and, in general, the felt Christmas tree for the New Year is ready. I like this craft more than others, you can crush the Christmas tree, throw it like a ball and nothing will happen to it. And it's very, very easy to do.

Perhaps the most common material for crafts was and remains felt - it is very easy to use and the crafts turn out to be very beautiful, and you can safely give such a toy to children without fear that they will prick themselves with needles or damage the Christmas tree itself. For example, the simplest way to do Christmas tree from felt for kids:

We make a cone out of cardboard, cover it with green felt, decorate it with beads, ribbons, sequins (it is better to sew on than to glue, so they will hold on more reliably). But still let them play under the supervision of adults, as a child can tear off small parts and swallow them.

Felt, this is a very pleasant material to work with, even playing with such a Christmas tree will be very easy and simple for a child. I really liked this idea of a Christmas tree made of felt.

To do this, we cut out two Christmas trees from felt, make an incision and put them into each other. But decorations can be different shapes buttons, or you can also use colored circles from felt and sew on Velcro. Then the kid himself can dress up such a Christmas tree and then undress it. Both a game and an educational activity at the same time. You can sew on beads of various shapes instead of toys, and make garlands from small beads. There are a lot of ideas, and in stores you can buy so many beautiful and interesting things.

A felt Christmas tree is very suitable for those who have small children, then there is no need to worry that they will prick themselves or break toys. It is safe and you can decorate it too. Here is one of the options for such a Christmas tree.

You determine the size yourself. Draw a cone on the paper.

Then, according to this template, cut out the base of the Christmas tree from cardboard, you can use plastic.

Then cut out a cone of felt with an allowance of 1 cm along the edges for the seams.

We glue the base-cardboard or fix it with something.

We sew the felt, folding it with the right side and turning it out.

We put on a cardboard cone.

We make patterns of toys and cut them out of different colors of felt.

You can make toys voluminous by stuffing them with filler and sewing on ropes.

We sew buttons on the base of the felt Christmas tree, and hang toys on them.

Velcro can be sewn to the toys, then the buttons will not be needed. Attach to any place.

This master class will help you make a stylish Christmas tree out of felt with your own hands in one evening.

White Christmas trees look modern, stylish and airy. The fashion for snow-white spruces that came from Europe is gradually replacing the usual evergreen beauties. However, if you stick to traditional natural shades, take green as the basis. You can choose any jewelry, add your own zest and use what is at hand.

Work materials

In order to make an original Christmas tree out of felt, prepare:

white and blue felt;
threads to match felt sheets;
a sheet of cardboard;
scissors, needle;
pencil, crayon;
craft glue or glue gun;
holofiber;
rhinestones for decoration;
braid, thread with sparkles or small blue beads.

If you are preparing for the New Year, then take a look, and, and if you just love this needlework, then do not disregard.

Step by step manufacturing technique

Print and cut out Christmas tree and star templates from paper.

Cut out a pattern from white felt - one piece of a Christmas tree, and from blue - two stars.

Fold the base so that the straight sides overlap, and join them with an overcast stitch.

Turn the tree inside out and straighten it out.

Fill the base with holofiber. It is not necessary to fill tightly, the main thing is that the figure is not hollow.

Cut out a circle from cardboard with a diameter equal to the circumference of the bottom of the Christmas tree. To do this, put the base on a sheet of cardboard and circle it with a pencil.

Apply a thin layer of glue around the edge of the circle. The line must be continuous.

Attach the circle to the base of the Christmas tree and press. Run your fingers along the contour, fixing the edges. Make sure that the bottom is well glued around the entire circumference. Wait a while for the glue to dry.

Take both parts of the felt star, lay them on top of each other and sew together. You can use a seam over the edge or just dotted stitches. If you want the figure to be voluminous, put some holofiber inside.

With a sharp object, push the filler into the ends of the star's rays. Sew up the hole, straighten the figure with your fingers.

Glue rhinestones to the ends of the rays.

From a blue ribbon, make small bows, pieces 8-10.

Glue the bows on felt tree glue or glue gun. Smear a drop in the center of the bow and press with your finger for 1-2 minutes. Distribute the decor throughout the craft in random order.

Take a thread with sequins, spread the tip with glue and glue it to the top of the felt Christmas tree. Wait until the glue dries.

Then coat a small piece of thread (6-7 cm) and glue, wrapping around the cone.

Paste successively the entire surface of the Christmas tree with a thread with sequins, passing it between the bows.

Where there are empty spaces, fasten blue rhinestones.

Take a star, glue the space between the two rays with glue and press it to the top. christmas tree ready to decorate the holiday! For sweets and tangerines, do it, and if there are little girls in the house, pay attention to the funny ones.

Such crafts can be made not only for yourself, but also for gifts to relatives and friends. Use different colors and decor ideas.

A master class on making a Christmas tree from felt was prepared by Zhanna Galaktionova, photo by the author. Happy holidays to you, dear enthusiastic women, girls and girls!