Making a boutonniere with your own hands from ribbons and flowers. Satin ribbon boutonnieres - choose a boutonniere for guests Kanzashi wedding boutonnieres

The most significant event in the life of two young people who decided to unite their destinies, of course, is the wedding day. In order for the wedding event to take place at the proper level and leave the best and most joyful memories for a long time, the bride and groom carefully think over their external image of the newlyweds and, in accordance with this, select wedding dresses and accessories.

Typically, brides give their appearance a lot of attention, and grooms are more modest in their choice of attire. A white shirt, a tie, a traditional classic suit, a boutonniere in a buttonhole - this is what the traditional groom's outfit looks like.

The tradition of wearing boutonnieres goes back hundreds of years. The men of Ancient Hellas at their wedding attached a small bunch of fragrant flowers and herbs to their festive clothes.

They tried to attach the bouquet as close to the heart as possible to scare away evil spirits. In medieval Europe, knights decorated their armor with a bunch of flowers as a token of love and devotion to their beautiful lady.

In our time, the romantic knightly tradition has received a kind of continuation, and at their wedding, men attach a boutonniere to the lapel of their wedding jacket on the left side, closer to the heart.

A do-it-yourself boutonniere for the groom from natural flowers is made from fresh specimens of plants cut early in the morning. Otherwise, the flower arrangement will lose its original attractiveness by the beginning of the wedding banquet and wither by the end of the holiday. Often, a floristic composition for the groom is ordered in wedding salons. Undoubtedly, floristry experts will make a beautiful bouquet for the groom.

However, it is much more interesting to come up with a flower arrangement yourself and make a buttonhole from fresh flowers yourself.

Manufacturing sequence:

The selected main flower specimen is placed in water for a while so that the stem of the plant is "saturated" with water, and after that it must be cut off by two to three centimeters, it is recommended to cut it with a sharp knife or secateurs at an acute angle.
The prepared flower is planted on a special floristic wire called "drot". In order to preserve the freshness of the flower for a longer time, the stem is wrapped with a cotton pad, previously moistened with water or vodka.
The next step is to tightly fit the resulting structure with an elastic teip tape, trying to avoid gaps and gaps.
A single flower is complemented by a sprig with green leaves, a dry spikelet, ripe rose hips or rowan berries and other decor. The joints are closed with beads or a miniature bow to match wedding dress bride.
The collected composition must be sprayed with water, placed in a plastic bag and sent to the bottom shelf of the refrigerator. The boutonniere in this form will retain its freshness longer.

Made with love and with your own hands, the mini-composition for the groom is filled with special charm and warmth, but the main thing is that it fits the bride's bouquet.

From tapes

A satin ribbon boutonniere is perfect for a wedding celebration in the winter season. The satin miniature composition is made in a color shade consonant with the bride's outfit. Self-production is carried out in the following order:

first, petals are made from a pink ribbon. To do this, you need to take a segment 10 cm long and fold it in half. Needle and thread Pink colour several stitches are made along the edge of the tape, the edges are sewn together and tightly pulled together;
the resulting petals are sewn in a circle, and a bead is inserted into the middle. satin flower ready.

The groom's boutonniere can be made in the form of a satin rose.

To make it yourself, just familiarize yourself with the master class on its manufacture:

a satin rose is made from a ribbon 80 cm long. The blank is stitched along the edge, which, after a certain step, rises to the top of the opposite edge;
the stitched tape is collected in a miniature roll and fastened with threads.

To assemble a floral wedding arrangement, you can use a blank from a single flower or rose. When choosing the shape of a boutonniere, everything depends on the creative idea and wishes of the newlyweds. It is allowed to combine two or three flowers of various shapes and color shades.

The next step is to collect the boutonniere:

a thin wire must be attached to the finished flower. This will be the stem of the composition;
to decorate a boutonniere, you can use mother-of-pearl beads or beads, which are strung on a thin fishing line, folded in the middle and attached to the stalk in arcs. Fix the beads with a drop of glue.
the wire is tightly wrapped with a green satin ribbon and a satin bow is tied at the base. A small pin is attached to the stem for attaching to the lapel of the jacket. Ribbon boutonniere is ready.

The color of satin ribbons must necessarily be combined with the bride's dress and her accessories. In addition, satin boutonnieres are perfect for wedding guests.

To independently create a wedding boutonniere for the groom, it is recommended to choose satin ribbons of matte fabrics, from which elegant and interesting handmade flowers are created.

From feathers

Instead of traditional miniature flower bouquets for the groom, you can offer an alternative boutonniere made from feathers. Such an original and interesting wedding composition is distinguished by its brightness and unusual appearance.

Fluffy feathers as the base of the boutonniere, combined with a satin ribbon, can turn this accessory into a real work of man-made art.

If you look closely at the photo, you can see that a feather boutonniere is not much more difficult to make than a flower boutonniere.

From polymer clay

Polymer clay is a popular design material from which you can create a delicate and unusually beautiful wedding boutonniere for the groom.

A high-quality polymer flower composition is very difficult to distinguish from a real living flower. An insanely beautiful miniature bouquet for the groom will be stored for a long time and serve as a wonderful reminder of a wonderful wedding day.

To figure out how to make a boutonniere from polymer clay, you just need to carefully look at the photo of the master class on making such a mini-composition. A boutonniere made of polymer clay can be of any, even the most bizarre shape.

It can be matched under the groom's shirt and thus complete the wedding image of the newlywed.

Like all traditional boutonnieres, the polymer composition can be decorated with beads, rhinestones or beads.

Polymer-based plastic clay allows you to realize any desire and turn an ordinary wedding accessory into a real design masterpiece.

Here you will see a master class on creating a boutonniere for the groom from polymer clay:

The wedding ceremony begins the family long life. Years will pass, and yesterday's newlyweds, surrounded by their children and grandchildren, will admire wedding photos and watch a video about themselves. beautiful day your wedding. Therefore, it is so important not to forget about the aesthetic combination of images of the bride and groom. Beautiful boutonniere repeating the flowers of the composition wedding bouquet, will help emphasize the unity of the wedding image of the young. What do you think?

A boutonniere is an ornament made of ribbons or flowers, which is located in the buttonhole of the groom's jacket. This accessory, according to tradition, is used in different situations. For example, in ancient Greece, a boutonniere made with the help of inflorescences and herbs scared away evil spirits. Later, it began to be used as an accessory for a casual men's suit. The modern boutonniere appears in wedding images, emphasizing the theme of the celebration and the unity of style.

Rules for making boutonnieres from ribbons

A boutonniere made with ribbons will never lose its freshness, so you don't have to worry about how it looks. Artificial material saves at winter weddings, when frost is detrimental to fresh flowers. The ribbon allows you to collect completely different compositions or use it as an addition to the classic flower. Initially, the word boutonniere, translated from French, meant "a flower in a buttonhole." The prototype of this accessory was a small bottle with a miniature composition or one flower.

Modern boutonnieres are pinned to clothes, they can decorate a woman's wrists, hairstyles. In most cases, this accessory is found on the groom's jacket. It is perceived as an obligatory component of the image. According to the rules, this attribute should be in harmony with the bouquet that the bride is holding. When compiling it, you should be guided by the following rules:

Think over the design, taking into account the theme of the upcoming event, the placement, for example, on the arm, on the lapel.
Ribbon flowers should be combined with each other, in harmony with the outfit.
You should not save on material, choose high-quality tapes. In addition, it is worth buying them with a margin so that there is an opportunity to redo them.
Don't make it too big.
The central flower should not be huge, taking up the entire lapel of the jacket, as it looks vulgar.
If you are going to supplement the tape composition with a sprig of a living flower, then choose one that will not cause allergies. Give preference to those specimens that have a minimum amount of pollen, and artificial materials should not have easily sprayed coloring elements, dust.
If you decide to make ribbon accessories for all witnesses, then you can not make them the same. Let them differ from each other, but in pomp they do not exceed the one that adorns the groom.
The chosen color of the ribbons should be combined with the outfit, accessories.

How to make a boutonniere from satin ribbons for the groom

Making a boutonniere with your own hands using ribbons for the groom is not too long and troublesome. When you have decided on the main composition, you should collect all the decorations that will serve as an addition. Walk around your apartment and you will definitely find something interesting: rhinestones, buttons, beads, bows, wire, mesh, ribbons. If a stem of a living flower is inserted into the composition, then it is better to play it safe and purchase several. Plants are very fragile and easily damaged.

Necessary materials

To create you will need the following:

threads in tone, a needle;
satin ribbons of one, two, or three colors, the width of which is 2.5 cm;
scissors;
candle;
decorative pin;
button;
ruler.

Stages of creation

We cut the tapes into such segments: 6 by 8.5 cm, 7 segments by 11 cm, 5 by 6 cm.

We solder along the edge with fire so that they do not crumble. Gently hold a burning candle over the braid.

We bend the tape 11 cm in the middle to form a right angle. We bend the edge that is directed to the right, back, comparing with the base. The first petal is ready.

With small stitches we pass the base of the leaf, lower it to the knotted end of the thread.

So we do with the remaining six cuts of ribbons. We collect the flower with threads, tightly fasten it with a knot.

We will do the same with ribbons of 8.5 and 6 cm. Three flowers of different sizes are ready.

It is necessary to connect the flower, threading the thread through the center of the largest, medium and small.

We sew a button. On the wrong side, a decorative pin is threaded through the boutonniere, which is attached to the jacket.

Master class on creating a boutonniere from ribbons for witnesses

It is possible to single out witnesses at a crowded wedding with a boutonniere made using ribbons. This beautiful and easy-to-work accessory will enliven the outfit. It is only required to carefully consider the attribute so that it complements the style of the wedding and harmonizes with the details of the image of the bride and groom.

Necessary materials

To create you will need the following materials:

fabric or braid;
button;
ribbon;
glue or glue gun;
thread, needle;
scissors;
iron.

Stages of creation

We fold the ribbon with an accordion. Fold every 2 cm. Fold until you get 10 additions.

We sew the accordion at one point from the edge: we make a stitch, we tie it in a knot.

We form a flower, directing each fold in one direction. We smooth with an iron.

Cut off a piece of tape 5 cm long. Glue it to the wrong side of the boutonniere.

A button should be attached to the center: you can use a ready-made one or cover it with an interesting fabric with an ordinary plastic or metal one.

Video tutorial on creating a boutonniere from ribbons with your own hands

Making a boutonniere is interesting and an exciting activity. The use of artificial materials facilitates the process, because when working with fresh flowers, practice is required. The video below demonstrates the process of making a boutonniere from ribbons. There are many subtleties in its creation, but with a visual master class, the procedure ceases to be so intimidating. Follow the basic rules, sequence and you will become the owner of a unique, luxurious accessory.

Rida Khasanova

Every couple in love wants to be the wedding was perfect. But a perfect holiday requires great effort. Carefully consider not only the menu and invitation cards, but also the outfit of the newlyweds. The boutonniere requires special attention - it should match the outfit of the newlywed and the bride's dress. Making a wedding boutonniere for the groom with your own hands is not so difficult. You just need to have patience and time.

DIY boutonnieres for the groom

DIY flower boutonniere for the groom

It is better to make a boutonniere for a wedding of fresh flowers for the groom yourself from roses. Also as central flower compositions, you can take any bud that matches the color.

It is important that the flower is freshly cut and strong so that it can remain in its original form for the whole wedding day, because it will not have a sponge substrate with water.

What do you need:

davallia greens;
white rose bud;
black and white teip tape;
wire for floristry (not less than 7 mm);
floral glue;
pin;
wire cutters;
decor wire and insert;
corsage pin.

Progress:

To keep the flower as long as possible, you need to cut the stem at an angle (the length of the stem should remain about 10 m), and put it in water for 1.5-2 hours.
Cut the flower with glue.
Divide the floral wire into two using wire cutters. Pass through the stem just below the bud so that the wire forms a cross and bend it so that the flower does not stagger along the line of the stem.
Divide another wire into 4 identical segments. Bend the edge of each with a crochet and put sprigs of greenery on top of them and strengthen with teip tape.
Connect the rose with greenery, cut off the excess length of the wire.
Additionally, you can decorate with a decorative insert, at the bottom of the rose tie a bow from a narrow satin ribbon and attach a bead.

The result will be tender and beautiful boutonniere, which is attached to the jacket with a pin. Using the boutonniere technique, you can also make jewelry for friends from the groom's side.

White rose boutonniere

Wedding boutonniere of satin ribbons for the groom

Boutonniere made from satin ribbons, is good because it will not lose an attractive bright look for the whole day. it great option decorations for the groom when the wedding is taking place during the cold season when fresh flowers can not hold out in the cold.

A boutonniere made of ribbons should not be heavily loaded with unnecessary details: beads or bows, so as not to step over the line of elegance and absurdity

What materials are needed to make your own boutonniere:

satin ribbons of 2-3 colors, about 2.5 cm wide;
needle and thread to match the ribbons;
candle or lighter;
scissors;
pin;
button;
ruler.

Master class for making boutonnieres from satin ribbons:

Tapes cut into the following segments: 6 pcs. 8.5 cm; 7 pcs. 11 cm; 5 pieces. 6 cm.
Treat the edges of the ribbons with fire so that the threads do not crumble.
Bend the 11 cm tape in half, forming a right angle. Bend the edge that looks to the right side back so that it is even with the base. Thus, the petal turned out.
With small stitches, pass the needle through the base of the sheet and pass it into the knot at the end of the thread.
Do the same with the remaining 6 tapes of the same length. Pull the thread to form a flower and tie a tight knot.
In the same way, make 2 more flowers - in the end you get 3 pcs. different size and color.
Put a medium flower on a large inflorescence, and the smallest one on it, fasten it with threads. Sew a button into the center, and a pin from the inside.

So simple and fast you can make a beautiful and elegant boutonniere for the groom.

White and blue ribbon boutonniere

Corrugated paper buttonhole master class

A boutonniere made of corrugated paper. For such a special occasion as a wedding, the decoration for the groom can be made by hand. Besides, she later will be remembered for a long time.

It is advisable to choose the colors of corrugated paper to match the flowers in the bride's bouquet or to bright elements her attire. Then the bride and groom will look stylish and harmonious

What you need:

green and pink corrugated paper;
wire for floristry;
two decorative petals;
satin ribbon (pink or other color);
hot glue and scissors.

Progress:

Cut pink paper into strips about 40-50 cm wide. The longer and wider the strips, the more voluminous the flowers on the boutonniere will turn out.
Cut the wire into 3 pieces about 10 cm long.
Fold a strip of paper in half lengthwise and secure with glue. Bend the edge of the strip inward and fold, holding the base of the future flower with your fingers.
Fasten each curl with a drop of glue so that the bud does not unfold. The bottom should be narrow, and the top should be lush.
Put a drop of glue on the edge of the wire and insert it into the center of the flower, squeeze it tightly with your fingers to fix it. Twist 2 more buds in the same way.
Cut green paper into strips 1 cm wide.
Glue one edge so that it covers the base of the bud and part of the stem. Twist the strip around the wire at the bottom of each flower.
Cut off another strip. Put flowers in a bouquet, put a ribbon under their buds and insert additional decorations: leaves and a satin ribbon. Wrap the stem with green paper to the end and secure with glue.

Attach to the lapel of the jacket on a pin by passing it through the stem.

Corrugated paper boutonniere

How to make a wedding boutonniere from foamiran for the groom

A boutonniere is an ornament that you can easily make with your own hands, while choosing the desired style, color and shape. Flowers fashioned from foamiran almost indistinguishable from living plants, thanks to the plasticity of this material and a rich color palette.

A boutonniere made of foamiran will perfectly hold on to the whole holiday, it will not be afraid of either rain or wind, since foma is a foamed rubber that is not afraid of bad weather

What you need to make groom's jewelry:

lilac and yellow foamiran;
awl;
cardboard;
scissors;
decorative stamens;
wire;
beads;
glue gun;
satin ribbon;
pin.

Progress:

Draw rounded petals on the cardboard template. Cut and circle on foamiran. For each flower you will need 4 identical petals.
Gather each petal into an accordion and twist easily, holding the ends to give the structure of a real petal.
Straighten the petal and stretch a little in the middle.
Attach the largest petal to the stamen, squeezing the base with your fingers. Then overlap in a circle to attach the remaining 3 petals, forming a bud.
In the same way, attach flowers to another stamen so that there is a bud on each of its edges.
Divide the thin wire into 5 pieces 20 cm long. Pull a bead through each wire to the middle and connect the ends, twisting with each other.
Fasten the flowers together - while making sure that one side of the boutonniere is flat.
Glue the beads on the wire to the flat side so that the beads are higher than the flowers.
Twist the pieces of wire at the bottom of the product into one stem.
Cut out a large backing sheet from yellow foamiran, slightly wavy it, stretching it with your fingers.
Cut the extra centimeters of wire from the stem and glue the boutonniere to the leaf. Tie with satin ribbon.

It will be possible to have a boutonniere on a jacket pin with a pin.

Boutonniere for the groom from foamiran

A boutonniere is a beautiful little bouquet, the only bright decoration the image of the groom, who can contribute to the creation festive mood. The bride will be able to make a boutonniere with her own hands, and the future husband will be doubly pleased to put it on and then keep it for a long memory of an unforgettable day in her life.

Another original and interesting version of the boutonniere, which you can make yourself, you will see by watching the video of the master class:

June 7, 2018, 23:58

Consider the most sophisticated options.

mini composition

How to make a boutonniere for the groom? The easiest option to create a mini-composition is to use one large bud and several branches with small inflorescences or berries. Many prefer to choose a rose, lily or kala for this, which are suitable for almost any look., and the shade can be selected depending on the color of the groom's suit.

To make a boutonniere, you will need the following materials:

1 large live flower (you can take a few, with a margin);
twigs of gypsophila or hypericum;
green teip tape;
floral wire;
safety pin for fastening;
scissors.

Before creating a boutonniere, you need to cut the stem of the plant at an acute angle and place it in water for at least 4 hours, this will allow the bud to stay fresh longer. It is advisable to decide in advance on the desired length, usually 1 cm of the stem is enough to create a strong composition. It is recommended to dip the cut of the flower in liquid paraffin or wax so that there are no wet spots on the groom's suit.

Then you need to cut two pieces of wire approximately 7 cm long, pierce the stem crosswise with them as close to the bud as possible and bend parallel to the stem. Additional branches of plants also need to be strung on floristic wire, bending it on one side with a hook. Having collected all the elements together, you need to twist the wire together and wrap it tightly with teip tape. The finished boutonniere is attached with a safety pin.

Gypsophila and hypericum are more suitable for roses or peony, and for lilies and calla lilies it is better to choose greens without inflorescences, but with larger leaves.

In the form of a mini-bouquet with lavender

If the wedding will take place in the style of Provence, rustic, vintage, or if the newlyweds just decided to hold a celebration in the fresh air, it is best to make a flower arrangement from wild flowers. In this case, lavender is often chosen as the basis, which symbolizes admiration.

You can use lavender as a single composition, wrapping it in a kind of linen wrapper. In addition, you can add additional elements - spikelets of cereals, thin green blades of grass or small wildflowers in pastel shades. Such a boutonniere should not be weighed down with bright accents or large buds. Wire should not be used either, it is better to secure the mini-bouquet with twine or other material that suits the style.

wedding planner

Like the bride's bouquet, the boutonniere can be dried and kept in the family to leave a reminder of happy day.

Elena Sokolova

Stylist

Unusual buttonholes for the groom should be combined with the overall style and color of the image. For example, a boutonniere for the groom in blue will suit every suit.

Tatyana Vorobieva

From satin ribbons in the form of a rose

A boutonniere for the groom made of satin ribbons is most often made in the form of a rose, since the result always lives up to expectations, even if a beginner has taken up the matter. There are many ways to make a bud look like a real one. For the most simple option manufacturing will require the following materials:

tape of the desired shade;
a needle with a thread matching the color of the base;
glue gun;
lighter or candle.

The cut edges of the ribbon must be immediately singeed so that the finished flower does not bloom. Then the ribbon is placed wrong side up, 1.5-2 cm recede from the edge, and the long end is bent at an angle of about 30 degrees so that the front side is on top. At the same angle, the tape must be bent again, but this time upwards. This must be done until the tape runs out so that the folds do not fall apart, it is advisable to fix them with pins.

Then the entire lower side must be stitched with a seam “forward the needle, but at the end do not make a knot, but pull the thread - the tape will begin to gather itself into a bud, it remains only to give it the desired shape. The core should be dense, but the outer petals can be given any shape and volume. The folds need to be smeared with glue so that the bud holds its shape. When it is ready, you need to make a knot on the thread and cut off the excess part.

You need to sew a wire frame to the wrong side of the resulting rose, then attach other decorative elements to it. These can be individual ribbons, feathers, artificial greenery, beads, etc.

The advantage of an artificial boutonniere for the groom is that you can create a composition of any shade, even if such plants do not exist in nature.

From ribbons - other decorations

The rose is not the only flower that can be made from ribbons. To make an original boutonniere, you will need the following materials:

ribbons 4-5 cm wide in two shades - green for the stem and any other for the petals;
stamens (available at hobby stores)
fishing line;
threads in the color of the petals;
green teip tape;
candle or lighter;
scissors;
ruler.

Cut the ribbon for the buds into rectangles 6 cm long. For one flower, you need 3 petals, it is best to make a boutonniere from three inflorescences.

Burn the edges of each piece. Lay one rectangle inside out, long side facing you. Bend two corners to the middle, sew along the underside, tighten the thread, forming a petal. Cut off the excess part, singe the edge. Do the same with the other rectangles.

Then you need to collect each flower, first forming a bud, and then placing several stamens in the center.

Having fixed the desired position, firmly sew the petals together from the wrong side. Sew a wire to the bottom of each bud, form a stem and wrap it first with teip tape, and then with green satin. To give the flowers a finished look, you need to cut out a square of green ribbon for each inflorescence, fold it several times diagonally and sew it to the base of the bud, forming a receptacle.

Interesting video: kanzashi accessory

A boutonniere for the groom using the kanzashi technique will turn out to be very beautiful. Petals for each flower are made separately, glued for strength and joined together. The result is a delicate composition that is not inferior to natural plants. In the video master class, you can see how to make such a mini-bouquet yourself.

In order for the images of the bride and groom to combine with each other, it is advisable to make a bouquet and boutonniere in the same style, and even better from the same flowers. If this option is not suitable, you need to choose the plants that are as similar in appearance or shade as possible.

Too large boutonniere will make the image heavier. The composition should complement the suit of the groom, and not distract attention to itself.
First, it is better to practice on spare colors, since not everyone can make the perfect option the first time.
It is better to choose flowers without pollen, otherwise it can stain the suit, and some of those present at the wedding may become allergic.
Plants with a strong aroma are also undesirable, since the groom will have to wear a boutonniere all day.
If done, such compositions should look more modest than those of the groom.

Summary

With the right amount of imagination and patience, anyone can make an original boutonniere that will emphasize the solemnity of the event. For you can use not only flowers in the composition, but also any materials at hand, such as a boutonniere for the groom from foamiran.

A boutonniere is an accessory for a man's suit, consisting of one or more flower buds. Modern wedding fashion involves the widespread use of jewelry, and not necessarily from fresh flowers. Accessories made of artificial materials look quite elegant. A do-it-yourself boutonniere allows you to show your imagination when creating an unforgettable wedding look.

Choosing a wedding accessory

The wedding boutonniere serves as an ornament not only for the groom's suit. A flower bracelet for the bridesmaids looks especially elegant. In addition, bouquets can complement seating cards for guests. Accessories for children look especially touching; the combination of the decoration of the little guests with the bride's outfit allows you to create a harmonious ensemble. Therefore, it is important to take into account all the nuances when choosing such an important accessory.

Basic rules for choosing a boutonniere for a wedding:

The design of the accessory should match the bride's bouquet or the theme of the celebration. For example, the use of irises or violets will allow you to create a decoration in lilac color.
It is worth ordering several copies of a wedding accessory at once. This will avoid trouble if the flowers wrinkle or wilt. Can be donated flower arrangements witnesses.
The fastening of the decoration must be reliable. The accessory with a pin is fixed quite firmly on the lapel of the jacket. The pin should not be conspicuous, it is hidden behind the details of the decoration.
In the cold season, it is better to opt for a composition of artificial flowers.

Making your own boutonniere

It is not at all necessary to order the manufacture of a wedding accessory to a florist. A handmade boutonniere will save money, while the bride will be able to demonstrate her impeccable taste and needlework skills to the guests.

How to make a boutonniere with your own hands:

Consider the design and shape of the decoration in accordance with the dress and bouquet of the bride.
Decide on the choice of material. A bouquet of fresh flowers may contain one or more buds. A boutonniere from one large flower, for example, from an orchid, looks quite elegant. In other cases, you can use additional details: ribbons, beads, gypsophila branches. artificial materials for the manufacture of a wedding accessory: satin ribbons, beads, foamiran, organza, mesh.
Assemble the details of the decoration into a single whole. All elements are attached to a wire or interconnected with a tape with an adhesive base.
Decide how to attach the accessory. You can use a special mount or pin: English, corsage. Some prefer to secure the bouquet with ordinary sewing thread using hand stitches.

From tapes

Satin ribbon decoration looks luxurious, while not losing its beauty. The bride can arrange a surprise by handing the boutonniere to the groom on the wedding day. It is believed that the girl must attach the accessory to the suit of her future husband with her own hands after the ransom ceremony. The master class "Do-it-yourself ribbon boutonniere" will allow you to follow the process of making a wedding accessory step by step.

Materials:

satin ribbons of medium width in blue and blue;
sewing threads;
scissors;
beads, rhinestones, beads.

Progress:

Preparing details. To make one flower, 7 small pieces of ribbon are required, the length of which is about 10 cm.
Detail processing. The ends of the tape are singed, this will avoid shedding open sections.
Segments of ribbons are formed into petals. It is necessary to fold them in such a way that an acute angle is formed. It is quite possible that the segments are simply folded in half, forming a loop.
The formation of a flower from petals. The base of the petals is successively strung on a thread with a needle to collect them in the center.
Bouquet formation. For this, ready-made flowers are used: two blue and one blue. The parts are strung on top of each other in such a way that a blue flower is located in the middle. The junction is decorated with beads or rhinestones. At the end, the decoration can be supplemented with ribbon petals. The finished bouquet is fixed with a pin on the lapel of the jacket.

From foamiran

Foamiran is a plastic material, which is a foamed rubber. A foamiran boutonniere will serve original decoration for the bride. It can easily replace a bouquet: the flowers seem alive, while the bride's hands remain free. From foamiran, you can create compositions of any complexity. Artificial peonies look quite elegant. To make jewelry, you need a sheet of pink or red. Petal patterns are cut out of paper, then, in accordance with them, details from foamiran. The more details, the more magnificent the flower will be. With the help of a slightly heated iron, the petals are given a concave shape. Then the petals are sequentially attached to the wire base.

For more information on how to make a wedding boutonniere from foamiran, you can watch the video:

Mesh and organza

Mesh and organza boutonniere is a combination of two types of fabrics. The shiny organza base is in perfect harmony with the sheer mesh base. The decoration with a rose will look especially luxurious, for the manufacture of which it will take only 15 minutes. First, circles of different diameters are cut out of organza. The edges of the fabric must be singeed. Then the parts are connected in series, securing them in the middle with beads or beads. You can make a composition of three colors, decorated with a grid. It is recommended to use material of contrasting tones. For example, a red flower pairs perfectly with the white mesh background. By the way, in the same way you can.

We invite you to watch the video tutorial:

A do-it-yourself boutonniere is a great addition to a wedding suit, an exclusive product that has no analogues. It is quite easy to make a decoration using a small amount of materials. Guests of the celebration will appreciate the impeccable taste of the newlyweds.

Also read: