From ribbons, do-it-yourself crafts for beginners. Crafts from satin ribbons

A ribbon flower is a beautiful decoration that you can easily make with your own hands. It can be used not only to decorate a gift, but also as a gift in general. Everyone can learn, the main thing is a little patience and time. Before you make a flower yourself, prepare all the necessary materials for work and follow the suggested master classes: the result will delight you with its elegance and versatility.

Making a bud from satin

For beginner needlewomen, a master class is great, clearly illustrating how to make a flower from wide-sized satin ribbons. The width of this material is 5-10 cm. Satin fabric is offered in a huge variety, so choose your favorite colors.

Advice

If the product is intended for a brooch, purchase material in a bright color. When making a bud for composing a composition or a textile bouquet, choose shades that are compatible with each other.

For manufacturing, you will need a two-meter skein of satin ribbon 5 cm wide, a piece of paper, a simple pencil, a lighter or matches. You will also need a needle with a thread of the appropriate color. Instead of a lighter, experienced craftswomen use a tea candle - it is small and convenient for singeing the edges.

From satin ribbons

Master Class

The master class consists of such simple steps:

• Base manufacturing. The first thing to do is to make a petal template. To do this, take a piece of paper and draw a petal of the desired size on it. To make the edges of the petal even, fold the sheet in half and cut 2 layers of paper at once in the form of a drop.

• Petal preparation. Cut the material into pieces of the required size in the form of squares or rectangles. Circle the prepared paper template on each segment and cut out the petals. The output should be about 30 pieces of petals.
• Petal formation. Bend the petal a little in half, light a candle and bring the workpiece to the fire. The material begins to wrap up before our eyes: you need to achieve the effect of a twisted petal. So do with all the blanks.
• Bud formation. When the petals are formed, we proceed to the manufacture of the product itself. At this stage, choose one of the two proposed methods of twisting. The first involves assembling on a thread with a needle: just put all the petals on the thread and tighten it at the base. The second method is suitable if you plan to make a stem: a foil ball is glued to the stick, and petals are attached to it with hot glue.

Buds made of paper fit almost everywhere: the bouquet looks perfect in a vase in the kitchen, in the hallway, as well as in the living room on the nightstand. For work, you will need a standard set of materials used in labor lessons at school. To make a paper flower yourself, prepare the following materials:

• sheets of colored paper of several shades;
• scissors;
• bamboo sticks;
• PVA glue or hot glue with sticks.

From paper tape

Master Class

The choice of glue depends on the type of paper used: if you choose thick paper like cardboard, it is better to take hot glue, it holds the petals more securely. If ordinary school paper is used, PVA glue is suitable. To decorate the stem, you need green corrugated paper.

The process of making carnations or paper roses is so exciting that you may not notice how time flies. It is especially fun to spin the product with children, and the choice of color inspires the baby the most. First, cut the paper into strips 3 cm wide - this is the most optimal size for blanks.

Further work will go faster if you prepare the stem in advance. To do this, cut a piece of corrugated green paper and glue it over a bamboo stick. Then take a paper tape, gluing its tip to the stem, start wrapping the flower in a spiral.

In this way, you can wind about 10 parts in 1 hour, which is already a full-fledged interior bouquet. The craft will be a good option for a composition for a gift, and will also amaze the child with its beauty and ease of manufacture. Pastel-colored paper flowers look beautiful in combination with contrasting shades.

kanzashi flower

To better understand the kanzashi technique, it is proposed to consider two options for making a flower at once: the first will be for beginners and involves the use of thread with a needle. Second master class based on the use of the technique of separate formation of petals by folding. After studying these two options, choose the most convenient for yourself and start creating a stylish and delicate bud.

Pink flower in kanzashi technique

The first master class will help you create an original flower with your own hands, reminiscent of a delicate chrysanthemum. It will be a good addition to a hair band, headband or hairpin. Production consists of simple steps that do not require preliminary preparation of individual petals.

To make a kanzashi flower, prepare a satin pink ribbon 2.5 cm wide, its length should be 1 m. You also need scissors, a thread with a light-colored needle, a lighter, a circle of felt, hot glue and a small bead or rhinestones.

kanzashi flower

Master Class

The work consists of several stages:

• Training. Cut strips from a common skein of material, their edges should be even. To do this, take a lighter and singe the working edge.
• Formation of the first petal. Take the material inside out towards you and wrap it at a right angle. Lower the material down again, wrap the free short edge on the front. This is how the first petal is formed, which is attached with a needle and thread at the base.

• Making a pink kanzashi flower. Next, the strip must be lifted up and lowered down. After that, turn the material to the right and fold it inward on the left side. A visible triangle has formed - this is a flower petal, it also needs to be strung on a thread.
• Final processing. When all the petals are formed and strung on a thread, the finished bud is straightened. The end and the beginning of the work must be fastened with hot glue. Glue the chosen bead to the center of the decoration.

A delicate and elegant flower is fixed on a felt base so that in the future it can be used for other purposes. With the help of the product, not only accessories for hairstyles, but also brooches and belts are successfully decorated. A kanzashi flower will be an appropriate addition to pick up curtains.

Kanzashi flower from a wide ribbon

Above, a master class of an elegant bud from a wide satin ribbon was already presented, however, it was based on cutting each petal separately. The technique involves folding several times, followed by firing the edges. The finished flower is tender and is also used to decorate the interior or hairstyles.

To make an elegant and simple kanzashi bud, we need:

• 7 pieces of satin 5x5 cm;
• scissors;
• lighter;
• thread with a needle;
• glue gun.

Also get a half bead: it is better that it has a contrasting color. For ease of work in the process of singeing the edge, it is recommended to use long medical tweezers with wrapped ends.

It is better to take the material of one shade - select it depending on the intended purpose of the flower. If you take different colors, it is recommended to alternate them with each other.

When all the materials are ready, we proceed to the creative process: we take each segment and process it with a lighter from all sides. This is necessary so that it does not bloom in the future. The step-by-step master class is described below.

The flower learns to be pretty, and the simplicity of its manufacture allows you to make several buds at once in a short time. They perfectly diversify the home interior, if you place them on the curtains in the girl's children's room. Flowers will look appropriate in the design of the composition for a gift.

Chamomile from a narrow ribbon

You can create beauty not only from wide satin ribbons, but from a smaller material. We will talk about making an attractive chamomile bud from a narrow material. This option is well suited for a brooch.

It should be noted right away that several types of flowers can be made from narrow strips: with round and sharp petals. Round petals resemble opened chamomile buds, and spiky ones resemble aster. W a master class with round petals will be described here, as it is suitable for beginner needlewomen to work with their own hands.

Prepare the following creative materials:

• 4 pieces of blue ribbon 6 mm wide and 15 cm long and the same number of pieces of pink material;
• felt circle or cut the base out of felt yourself;
• glue gun and thermal sticks to it;
• tweezers for creativity with curved edges;
• beads or a group of beads to form a core.

The work will be so simple and exciting that you may not notice how time flies. First you need to fold each segment in half - it will be easier to work with the material. In the middle of the felt base, glue each pink segment in the center so that you get a snowflake of six rays.

From a narrow band

Master Class

In the next step, use glue to fix the ends in the center: it is important here that each petal is folded in one direction. Next, take the blue ribbons and also glue them in the shape of a snowflake with rays from the center. Pass the ends through the holes of the rose petals.

Everyone knows a bright and versatile material - packing tape. With its help, florists and designers create incredible compositions of real flowers, bouquets, and also pack gifts using special paper for the base. From this material it is very easy to make an attractive rose with your own hands, which will become an element of a panel or decorate the interior.

Everything you need for work can be found in the nearest florist shop. It is better to choose a bright ribbon so that its edges are framed with a contrasting shade: then the finished rose will look elegant. Prepare packing tape 5 cm wide, its length should be 70-100 cm, as well as scissors, stem wire and a glue gun.

Bright and versatile material

The master class consists of the following stages:

• Initial twist. Take the edge and bend it towards you so that you get an isosceles triangle. The resulting tip should protrude slightly beyond the line. Next, start twisting the edge, forming the middle of the bud: on the other side, you get a tube into which you can later insert the wire.
• Product formation. At the second stage, it is necessary to wrap the workpiece so that petals are obtained. To do this, fold the protruding edge inward so that the front part is at the top. Continue twisting the rose, and when you reach the end of the fold, fold the ribbon again - already inside out.
• Stem making. After each bend, glue the flower for secure fixation. When the rose is ready, insert the prepared wire into the lower tube: if necessary, paint it green.

Lush roses from nylon ribbons

Artificial handmade flowers for a long period do not leave the fashion trends in the design of evening dresses, home interiors. If earlier the product was considered a sign of a person’s inability to acquire a finished thing, today handmade items have gained value. With the help of an elegant small bud, you can easily decorate any composition.

The options for how to use organza rosebuds are varied, they are decorated with:

• wooden jewelry boxes;
• arrange frames for photographs;
• decorate topiary.

From kapron ribbons

Master Class

Homemade flowers look great on greeting cards, gift boxes. The master class does not contain complex steps, as the material is easy to process.

Organza is made from polyester and viscose, which adds plasticity and shine to the material at the same time. For work you will need the following materials:

• nylon ribbon or organza 2 cm wide, 130 cm long;
• a wide satin ribbon 4 cm wide in dark green for the leaves: you can use a lining synthetic fabric instead;
• several stamens - they are sold in art and florist shops;
• circle of felt with a diameter of 3 cm;
• scissors;
• lighter;
• hot gun;
• thread with a needle.

A simple master class will surprise you with the speed of making rose buds: they turn out to be tender and beautiful.

Stage	Description
Training	The edges of the material must be immediately processed with a lighter to prevent the threads from unraveling.
Rose formation	Take the edge and fold the corner. It must be sewn with a thread with a regular stitch. Then fold the tape leading 2 cm in front, make a triangle, sew. So it is necessary to do with the rest of the tape
Bud twist	Starting at one end, gently roll the material in one direction, periodically fixing it at the base with glue
Creating leaves	Cut a wide ribbon into 4 cm squares. Bend each square diagonally three times, singe the edges and turn the leaf inside out

At the end of the work, fix the leaves at the base of the bud, and also stick a felt circle. To place the stamens in the center of the rose, they must be glued inside with hot glue. A little effort, time and the rose is ready: now it will definitely cheer you up.

Using various ways of working with satin ribbons, you can create not only well-known hair clips, but also make stylish earrings, an elegant necklace or a lovely brooch. Or show your imagination and create a complete set for a significant event.

This set is made using the kanzashi technique, which is incredibly popular lately. For this incarnation you will need:

• satin ribbons of two colors of the desired width (from 2.5 cm to 5 cm);
• Scissors;
• Yardstick;
• Source of fire (candle or lighter);
• Glue gun;
• Beads for decor and accessories for jewelry.

Set up your workspace carefully. All prepared materials should be at hand.

First you need to prepare square blanks. Then roll the petals of the future flower out of them. Next, form flowers and twigs from the prepared petals and fix them on the base tape. Glue a bead to the center of each inflorescence. At the ends of the decorative ribbon, attach the elements of the fastener of the necklace or the loop of the earring.

Stylish and extraordinary decoration is ready.

Embroidery ribbons

There are many materials about satin stitch or cross stitch embroidery. But few people know that you can create wonderful paintings using satin ribbons. Although as a result of this direction, unusual, voluminous canvases are born.

But for the minimum cost of time, effort and money, this needlework is the best.

To make crafts you will need:

• Tapes. It is best to use satin. This plastic material has an extensive range of colors;
• Textile. Any matter through which the ribbon will pass without deforming will do;
• Several needles with a wide eye. You can purchase a knitting needle (it differs in that it has a blunt tip);
• Scissors and hoops;
• Lighter.

Motifs for embroidery

Most often, nature, bouquets or butterflies are chosen as the plot for the picture. These drawings are previously applied to the matter. Then the contour is embroidered with various seams. The most beloved by needlewomen is the queen of flowers - the rose. To embroider this flower, it is enough to take five steps. The photo below shows in detail how to do this.

You need to complete five stitches with a simple snowflake thread. Then we stretch the tape under the fibers, alternating the passages from above and below. The size of the bud will depend on the number of turns. The thread should match the color and tone of the ribbon.

Embroidery techniques

In order to embroider a canvas with a ribbon, you need to know the various stitch options. Their main variations are:

• The stalk stitch is short small stitches, located close to each other in a straight or slightly oblique line;
• The chain stitch is like a series of loops coming out of each other;
• French knot.

Sometimes, to enhance the effect, decor from beads, sequins and beads is added to the ribbons.

Decorative decorations from ribbons for the home

One of the most striking examples of crafts for interior decoration from this material can be Christmas balls made from it. Which is especially true on the eve of the New Year. To create them, the "artichoke" technique is used.

In this method, pieces of satin ribbons are attached to the workpiece in a certain order, which depends entirely on the desired pattern. A detailed photo report will help you understand the process.

We perform the second half of the ball in the same way. Then we glue the loop and decorate the junction with golden braid.

For the everyday beauty of your abode, you can make an original basket of flowers. For this incarnation, you will need:

• Large bar of soap;
• Safety pins with pearl heads;
• Ribbons for baskets and flowers.

Poke the pins into the upper edge of the soap so that the distance between them is approximately 7mm. Do the same on the other side of the piece. Next, fixing the tip of the tape, wrap it around the soap as shown in the photo.

Next, we fix the handle of the basket, made of wire wrapped with tape. We place the roses made in the basket. To create them, make the required number of buds according to the photo. For the stem, we wrap a piece of wire of a suitable size with a green ribbon.

We place flowers inside the basket, and the elegant decoration of the interior is ready.

I hope you are convinced that making crafts from ribbons is not a difficult task. Needlework will help you express yourself creatively, pass the evening with enthusiasm, and greatly decorate you and your world around you.

Many craftswomen love to use satin ribbons in their work. If you have not tried to make crafts from them, then it's time to start, and you will notice how easy, fast and beautiful you can make such homemade crafts.

Advantages

As photos of ribbon crafts show, such things have the following advantages:

• Low cost.
• Aesthetics.
• Durability.
• Relatively low consumption during operation.
• There is no need to use special tools and skills.
• Excellent compatibility with other decor, whether it be beads, beads or rhinestones.
• Simplicity of the process of making accessories.

Areas of use

It is customary to single out several areas for the use of crafts from ribbons. Such beautiful gizmos can be created with the child.

According to pediatricians, children who are engaged in needlework have a higher level of development and activity. This is due to the fact that, when creating a certain craft, it is necessary to perform quite a lot of related tasks.

It turns out that by teaching a child to sew, you teach him to make decisions on his own. In addition, needlework develops fine motor skills, as well as accuracy, patience, attentiveness and perseverance. Making accessories from ribbons, children learn how to handle a needle, and this skill will definitely come in handy for them later in life.

Speaking of adults, ribbon fakes can decorate not only clothes, but also interiors for the holiday. This will not require significant cash outlays, but such gizmos always look original and stylish.

In addition, accessories made of satin ribbons can serve as a wonderful gift for relatives and friends.

Types of tape creativity

Interior decorations made of ribbons attract with their diversity and spectacular appearance. They can be simple or complex in design. In other words, you can make some trifle out of ribbons or create a real masterpiece. It all depends on the imagination and skills of the craftswoman.

Let's consider what crafts can be made from a satin ribbon with a child. Here is a short list:

• decorations for hairpins or brooches in the form of flowers or bows;
• bracelets;
• decorative elements for decoration of gifts or room.

There are more complex options for crafts from ribbons. Ribbons are used to embroider pictures. They are also used to make sachets, holiday paraphernalia, decorative bouquets, decorations for Easter eggs and much more.

Techniques for working with satin ribbons

After studying the ideas and instructions for making DIY crafts, we can conclude that there are several basic techniques for working with ribbons:

Weaving. This method is suitable for making a bracelet, pendant or embroidery blank. Even an inexperienced person can use this method, since no special knowledge is needed here.

Sewing. This method requires mastering the simplest techniques for working with a needle and thread. Most often in this case, ribbons are used in applications.

Creation of things of varying degrees of complexity from various additional details. In this way, you can make small baskets with folding handles, caskets and chests.

If you are just starting to take the first steps in mastering ribbon art, then you need to attend at least one master class on ribbon crafts. They are organized by experienced needlewomen.

They will be happy to share their tricks with you and tell you all about the specifics of working with ribbons. In addition, you can get advice on the manufacture of a particular accessory.

Starting with simple forms, after some time you will increase your skills and you yourself will be able to give master classes to beginners. Many popular designers began their journey into the profession with handmade crafts.

Note!

Decorative gizmos from satin ribbons are always unique. Through them, the mistresses convey their mood and vision of the world. It is also a great way for any craftswoman to show her level of skill and artistic taste.

Do not be afraid to fantasize, turn on your creativity to the fullest, and everyone around you will begin to admire your crafts.

Photo crafts from tapes

Note!

Note!

Flowers from satin ribbons look very beautiful. Every person who sees such an ornament will want to repeat it with his own hand. This activity is exciting and addictive. At first, something may not work out, but after a while you can learn everything. This will help step-by-step instructions for folding flowers from ribbons with your own hands.

Making satin flowers

Making flowers from satin ribbons is no more difficult than learning how to knit. The main thing is to carefully study the schemes for creating crafts. Then everything will work out. To work, you will need the following materials:

1. Ribbons of different width and color.
2. Threads of various shades.
3. Scissors.
4. Needles.
5. Sequins.
6. Fishing line.
7. Glue gun.
8. Tweezers.
9. Ruler.
10. Beads.
11. Candle.
12. Table lamp.
13. Chalk or soap.

There are two ways to make flowers from ribbon - this is a reflow or a kanzashi technique.

The second manufacturing method came to Russia from Japan. In this way, the locals decorated the hairpins. In this case, several types of petals were used: sharp, round and long. Hairpins, clothes, hairpins or a headband are decorated with crafts.

Kanzashi Ribbon Color Scheme

1. To begin with, a workplace is being prepared.

2. You will need a table and a lamp with bright light.

3. A tape 6 cm wide is taken.

4. It is cut into identical squares.

5. The square is folded diagonally, after which the two corners fall to the central fold.

6. Thus, a rhombus is obtained.

7. The side corners are bent back, the cut point is clamped with tweezers.

8. It is straightened with scissors and then pollinated by fire.

9. The result is a round petal.

10. You will need several blanks.

11. The resulting parts are assembled with a thread.

12. It turns out a bud, which is glued to the base.

13. The middle is glued on top.

Flowers from satin ribbons using the kanzashi method are ready!

Flower of fused petals

Another common way to make crafts is the reflow method. Typically, the method is used for a large composition, for example, for a basket of flowers. When performing crafts with this technique, some nuances are taken into account:

1. Kanzashi petals look more neat than those made by melting.
2. This method is time-consuming, so it may not work the first time.
3. Not all ribbons are suitable.
4. Only ordinary, brocade, satin or nylon are used.

First, a blank is drawn on a sheet of paper. The template is cut out. A minimum of 12 petals are made. The template is applied to the tape, outlined in chalk, then cut out. Each petal is made smaller than the previous one. Flame pollinates the edge of each piece.

Ready-made crafts are collected in a bud. The work is done carefully so that the flower is symmetrical. The base of the craft is stabbed with a needle or pin, a sequin or bead is sewn into the middle. The flower is ready by melting. Such flowers from satin ribbons are well connected in bouquets for a gift.

Chamomile from satin ribbons

Chamomile has always been a symbol of sincerity and tenderness. This craft can decorate a bag or clothes. Chamomile is made in different ways. To do this, you need ribbons of various widths.

A 1.5 cm wide ribbon is taken. To make a flower, you will need scissors, a satin yellow ribbon, a fabric base, a 1.5 cm wide ribbon, matches and a glue gun.

1. The tape is cut into 28 rectangles.
2. The length of each is taken at 4 cm.
3. The top of the segment is cut in such a way that a semicircle is formed.
4. The resulting workpiece is melted with a flame so that the edges are bent.
5. The lower front corners are wrapped towards the center.
6. The same is done with the rest of the segments.
7. The base is being prepared, a circle with a diameter of 2.7 cm is cut out of dense fabric.
8. 14 petals are glued onto the prepared base.
9. A few more pieces of blanks are glued under them.
10. The middle of the craft is twisted from a yellow ribbon.
11. It is fixed with a glue gun on the received product.

Beautiful chamomile is ready!

Ribbon flower 5 cm wide

To make the product beautiful and symmetrical, you need to follow the scheme of how to make a chamomile from a satin ribbon. There are two ways to form a flower. First option:

1. For a DIY ribbon chamomile master class, you will need the following tools: matches, satin ribbon, tweezers, scissors, glue gun, white satin ribbon 5 cm wide.
2. The white satin ribbon is cut into 14 pieces.
3. Each craft is cut 5 cm wide.
4. A round petal is made using the kanzashi method.
5. They stick together.
6. Then the middle is made: a loop is made from a satin cord, another one is superimposed on it.
7. Loops are held with tweezers.
8. The right end of the cord is punched through 3 holes.
9. A knot forms. The edges are singed with a candle.
10. The finished center is fixed on the camomile. The flower is ready!

To make crafts according to the second method, you will need a needle, matches, scissors, threads, yellow and white satin ribbons, a glue gun and a candle.

The ribbon is cut into thin strips. The length of the workpiece is taken 7 cm. The edges are singeed with a candle or matches. Each blank is folded in such a way that a corner is obtained. The petals are turned over and the two sides are connected again. It turns out one big one. It will take only 5 blanks.

The middle of the bud is made, for this a circle of small diameter is cut out of cardboard, a yellow satin ribbon is glued to it. Now the flower is coming together. The petals are superimposed one on top of the other, sewn with a needle and thread. The middle is attached with a glue gun. The product is ready.

Craft from a tape 0.5 cm wide

To complete the work, you will need a white satin ribbon 0.5 cm wide, base fabric, glue gun, scissors, matches, yellow beads.

The white ribbon is cut into 24 pieces. The length of each workpiece is 8 cm. Each product is folded in half, a fold forms in the middle. The edges are melted with a candle. All blanks are performed in a similar way.

Then the base is made, for this a circle is cut out of dense fabric. Diameter 2.5 cm. 8 petals are glued to the base. Between them, the rest of the blanks are fixed. After that, the middle is done. The workpiece is smeared with glue, yellow beads are poured onto it. When it sticks, the remnants are shaken off. Use a toothpick to form a circle.

satin roses

Craft from satin ribbon and buttons

To complete the work, you will need a ruler, scissors, a tape of small width, buttons, matches and a glue gun. To make a simple flower, a ribbon is cut into 6 or 8 thin strips. The edges are pressed with a match. The ends of the future flower are glued to the center of the blank with a glue gun. The elements are glued together in such a way that a bud is obtained. A button is glued to the center of the joints.

simple flower

To work, you will need scissors, matches, a pink satin ribbon, a needle and thread, a pencil and a glue gun. The pink ribbon is cut into 5 identical strips. The edges of the workpiece are melted by the flame. Using a pencil, a mark is made in the center of each part. The edges of the workpiece are fastened with a needle and thread.

The strips are folded in two. A few drops of glue are applied to the inner surface of the product and the sewn-in part is glued. The petals are strung on a thread and sewn together. A button or large beads are used as decoration of the core.

Felt roses

Flowers are made not only from satin ribbons, but also from felt or felt. For such a rose, you will need a needle and thread, super glue, blue ribbon, chintz, green felt, wire.

A loaf of the future product is cut out of green felt. Six petals are made from chintz. The wire is wrapped with green tape, the edges are glued with a glue stick. The blanks are folded in two. Along the cut, they are strung on a thread. When the fabric is dry, it can be used for work.

Next, proceed to the manufacture of the button. To do this, an inflorescence is attached to the end of the wire, a stem is put on through a hole in the felt. A finished piece of petals is glued into the center. You can make several flowers, combine them into a bouquet. Tie everything with a beautiful ribbon. This set is perfect for a gift.

Pansies

Making pansies is very simple - the craft is done using the kanzashi method. For pansies you will need:

1. Purple ribbon 3, 4 and 5 cm wide.
2. Tweezers.
3. Beads.
4. Glue.
5. Hairpins.

Squares are cut out of the fabric, they are folded diagonally. The resulting triangle is folded in the middle twice. The edges of the fabric are cut off, melted with a flame. It turns out a petal. Several blanks are strung on a thread and tied together. By this method, a petal of a sharp shape is obtained. To get a round petal, the corners are bent towards the center. The same is done on the other side.

You will need

• For butterfly hair clips:
• - beads of different sizes;
• - wire;
• - accessories for sewing;
• - rep (satin) ribbon 0.5 cm wide;
• For souvenir "Slippers":
• - thin cardboard (A4);
• - satin tape;
• - thread;
• - needle;
• - glue "Moment";
• For the rose:
• - wide satin ribbon (red, pink, white);
• - narrow satin ribbon (green);
• - rose leaves (artificial);
• - thin white wire;
• - green wire;

Instruction

Beautiful and delicate butterfly hairpin. Mark up on the tape. Place dots at intervals given in the following order: 7 cm, 4.5 cm, 7.5 cm, 5.5 cm, 6.5 cm, 3.5 cm, 5.5 cm, 5 cm, 5 cm, 5 .5 cm, 3.5 cm, 6.5 cm, 5.5 cm, 7.5 cm, 4.5 cm, 7 cm. using a thread with an accordion needle, inserting the needle into the marked points and pulling the binding thread.

The tape should be placed on opposite sides of the needle. Subsequently, when you collect the entire ribbon, pull the thread and secure with a knot. Carefully unfold the workpiece around the circumference so that it is located in a spiral line. Form the shape of the butterfly wings, fixing with a thread so that they do not crumble.

Make the body with the antennae by preparing 2 small beads (for the antennae) and 3 large ones (for the body). Pass the wire through the bead and twist the two ends of the wire about 1 cm. Then add the second bead and twist the wire again 1 cm.

In the remaining 2 ends of the wire, put one large bead, then dividing the ends of the wire, put 2 large beads on one of them. Attach the body to the butterfly and secure the bottom with wire. Glue on the crocodile clasp.

Souvenir "Slippers". Make templates for the sole and upper part of the slippers on A4 sheet. Prepare the strips by cutting the ribbon according to the size of the pattern.

The strip should wrap around the part on both sides. The weaving pattern is a simple checkerboard braid. Start weaving with 3 stripes, gradually alternating vertical and horizontal stripes.

When you have finished braiding the upper part of the slipper, fly off the sole, securing the edges with glue. Assemble the slippers by sewing the pieces together. Decorate the upper part with a ribbon gathered on a thread.

Next, sew on ribbon ties and a rose flower. Such a souvenir can be used as a gift or adapted instead of a needle bed by inserting foam rubber or synthetic winterizer inside, and then decorating with a cloth or ribbon.

Volume rose from a satin ribbon. Measure a piece of wide pink ribbon 8 cm long and cut its edges at an angle, cutting off up to 1 cm from each opposite corner. Then fold one edge of the tape down perpendicularly. Then, lower the horizontally located segment of the ribbon down, bending it and applying it parallel to the sheer part of the element.