Crocheted hats for women. Crocheted hats, berets, scarves

Hello, today's topic is this is KNITTING HAT… I will show you the most beautiful models of women's hats for the winter of 2016-2017 and tell you exactly how they are connected ... In this article I will reveal to you the general principle of knitting women's hats and berets(both crochet and knitting). You can already about one photo to understand exactly how this hat is connected... and LEARN without diagrams and descriptions to figure out for yourself what and in what sequence you need to do in order to eventually knit just such a winter hat as in the photo.

Today we will knit...

hats-caps on knitting needles (elongated and on the head)
beret hats on knitting needles and crochet (fluffy and not so)
women's turban hats (I will show one simple way on knitting needles)
knitted hats with fields and visors (I will tell you in detail how to make fields)
winter hats with elegant soft lapels
and dried wool caps designed like an English lady.

So, let's start knitting our autumn and winter hats.

Let's start with the simplest ones... and move on as the task becomes more complex.

Women's hats SIMPLE KNIT spokes ...

(cut CAP)

The fastest knitting hat is when you just chose one simple pattern(gum, English gum, knit-rice) ... And drive almost the entire (or even all) part of the canvas in one pattern. Starting from the crown - in each row we begin to decrease the loops, and when 15-20 loops remain on the knitting needles - we pull the thread through them - and simply pull them into one bunch-point at the back of the head. According to this principle, the cap is knitted in the photo below - (25 rows of knitting of the "rice" pattern ... and 15 rows of purl loops with decrease).

And in the same knitting with the “rice” pattern, it would be nice to knit a cozy scarf-snood (collar).

In such a RUNNING PATTERN (of the same type) can be connected as dense winter hat (covered over the head) ... So loose spacious knitted hat pattern. Decorate women's hat you can use one or two fur pompoms.

Can be knitted HAT-CAP - as in the photo below . She looks best when it has a fairly wide (16-20 rows) gum. With a narrow elastic band, such a hat is not suitable for anyone ... as it visually cuts off the skull. A wide elastic band, on the contrary, visually stretches the oval of the face ... opens the forehead and gives volume.

To knit any hat pattern exact knitting pattern in principle, it is not needed ... Since all the hats in the world are knitted according to the general principle. Below I give a general knitting pattern for hats-caps... And a little lower I will give a knitting pattern for all berets.

GENERAL KNITTING SCHEME

for any caps.

Such hats-caps can be knitted according to a simple WITHOUT A PATTERN ... or according to a RELIEF or OPENWORK pattern. Choose any knitting pattern on any site ... and go.

Step 1 - START KNITTING

First and we knit an elastic band (in 12-15 rows) and further ( without adding loops on the knitting needles) we knit an already patterned fabric of a hat. We get a model similar to the photo of the purple hat is above.

Or after knitting the elastic we can add stitches on the needles... and our canvas will begin to expand ... and we will get a model of a cap that is lush in volume (as on the pink model from the photo above ).

An important rule for adding loops.

When adding loops when knitting a hat with a pattern only one thing matters - the total number of loops on the knitting needles should be DIVIDED BY THE REPORT of the pattern (by the number of loops that are repeated in the pattern pattern) ...

For example, the report (repetition) of our pattern is 8 loops ... which means that the total number of loops on the knitting needles should be divided by 8 ... For example, it should be 160 ... or 168 ... or 176 loops ... (edge-edge loops do not count).

Step 2 - BASIC KNIT.

Further, when the loops are added we begin to knit a pattern ... repeating reports ...
We drive the patterned canvas on rows 40, if you want the usual size of the cap ... (it also depends on the thickness of the threads) Trying on the head ... in the process of knitting, you yourself will understand when it’s enough to drive in a straight line and it’s time to narrow the fabric at the crown. (You can run such a patterned canvas longer so that the hat is higher ... or finish earlier so that the hat wraps around the head, and does not stick out or hang down - everything is up to you)

Step 3 - COMPLETING THE HAT .

Then when our hat approaches the back of the head(or whatever length you want)… we start to close the loops 4 each (or 6 ... or 8 each) in each row - the more you cast off the loops in the row, the faster your knitting will end. Since knitting is completed when 16-20 loops remain on the knitting needles

An important rule of DECREASE loops.

We know that there are fewer stitches on the needles if knit two loops together (as one) ... But in order for the decrease in loops to be UNIFORM - you need to do this decrease in any place ... and in certain sectors of the cap ... (so that these decreasing places are at the same distance from each other). That is, we divide the entire circumference of the cap into sectors (as we divide a round cake into equal pieces with a knife) ... usually an even number of sectors can be 6 ... or 8 or 10 ...

If you have a hat with a pattern(in which some drawing-report is repeated) - then the drawing itself can be a sector ... Then we make the decrease in a certain (at your choice) place of the pattern- and so in each repetition of the pattern we knit two loops together as one.

Here's what it looks like in the process sector decrease loops when knitting any hat or beret ... (it doesn’t matter if you knit it on two knitting needles or on circular ones).

for example- we have 160 loops on the knitting needles - and we have reached the top of our hat and we need to decrease. We decide to decrease evenly in 10 places of each row ... So we need to divide our hat into 10 sectors.

Then we divide 160 by 10, we get the number 16 ... (that is, we mentally divide the hat into sectors - 16 loops in each sector). And so we continue...

In our first decreasing row we will knit at the end of each 16th loop two loops together(that is, we pick up each 15th and 16th together and knit as one) ...

In the second decreasing row there is one less loop in the sector (and we will already pick up together every 14th + 15th loop in a row) ....

In the third decreasing row- in each sector there are even fewer loops (and we will knit together every 13th and 14th loop).

Everything - now you can complete the knitting.

We collect these remaining loops on a thread... we tighten the thread by collecting all the loops into a bundle and tie it into a knot (we hide the ends of the knot inside). We close the back seam of our hat... and you're done.

LOWERED hat in coarse knit…

If you knit a hat-cap on thick knitting needles and thick threads ... then it’s better to make it SMALL - ON THE HEAD ... and wear it slightly tilted back (that is, without pulling it over your forehead).

The knitting principle is small low hat- exactly the same as that of a high cap-cap ... It’s just that here the FRONT PART of the knitted fabric will not be so long ... that is, we’ll move on to the TOP PART with its loop-reducing rows early.

Knitted hats - WITH EARS.

HAT WITH EARS №1 (dark gray in the photo below) You can KNIT the ears separately and then sew them to the right place of the finished knitted hat.

HAT WITH EARS №2 (light gray in the photo above) - we knit a hat in the form of a pipe - without reducing the loops at the top, and then just close the loops and sew the front and back of the hat together in a straight line. T about there, the top of the pipe was flattened (and this flattened edge was sewn together)

And then the corners of this straight seam we turn into ears. To do this, we make a seam with threads DIAGONALLY cutting off this corner. We make a seam with a thread, pierce through both layers (front and back) and not with a needle, but with an ordinary crochet hook we thread the thread back and forth. Thus, our corner will not be pulled over the head like the whole hat, but stick out like a separate ear. And from the other corner of our flattened and sewn cap pipe, we make out the same eye, in the same way.

Or such ears can be conceived on knitted hat with braids - with a lush relief pattern. It is easy to knit with your own hands.

Knitted HATS with knitting needles - WITH BRAIDS.

LARGE RELIEF KNIT "BRAID" looks very nice on women's hats

And braids can be placed vertically(as on the ash-pink hat from the photo below).

Or you can make a longitudinal knitting of a hat - not from the forehead to the top of the head, but along the side line (along the girth of the head) - and then our braids will be horizontal left to right - like on the gray hat from the photo below.

KNITTED HATS -

With lapels and FIELDS.

Fashionable hats with fields- reminiscent of elegant hats - so feminine, ideal for an elegant coat with flirty gloves ... Under loose curly hair

Sometimes the fields are knitted SEPARATELY and then sewn to the edge of the finished hat ...

Sometimes, in order to give such fields the necessary rigidity, special blanks of felt fields are cut out ... and inserted inside the fields folded in half (like a bookmark in a book). This is exactly what is done on the knitted hat from the photo below.

Here, try to make the same (as in the photo above) fields on your hat - it's easy to do it yourself ...

Step 1 (preparatory)

First you knit a hat ... Then you cut it out of felt a figure resembling a bagel (a pancake with a hole)... the inner edge of the donut hole should be the same size as the circumference of your head and the edge of the hat.

Step 2 (knitting )

Then on the needles we will knit DIRECT (rectangular fabric gum pattern).

To do this, we collect such a number of loops ... so that the future canvas is equal to the length of the OUTER circumference of the felt donut (you can measure it with a centimeter or a school formula) ...

The length of the canvas should be twice as wide as the thickness of the donut - to wrap the bagel around it from below and above (since the knitted fields at the cap go both above and below) ... That is, we knit the fabric and from time to time try it on to the width of the cut out donut - we wrap the barrel of the donut from the lower and upper sides and see how many more rows are missing ... we knit to the desired length.

Step 3 (stitching )
When the canvas is connected (that is, it has reached a sufficient width for wrapping and sewing a “donut-blank” into it), we are on our canvas close the loops ... remove it from the knitting needle.

We wrap our felt bagel with a knitted cloth ... so so that the fold of the canvas is along the OUTER edge donut ... and the connecting seam of the doubled fabric went along the inner edge of the donut fields was ... (that is, we immediately wrapped and sew the halves of our canvas along the inner edge of the donut)

And then along the edge of the same seam we sew our finished fields to the finished hat. And that's it. You can now crochet a beautiful fluffy flower and add it to the side of your hat.

Another way to make fields on a knitted hat.

And in the fashionable model of a light beige hat (from the photo below) - the fields are formed by themselves when bent in half knitted classic elastic band (one front, one purl). it's easy to do it by hand.

That is, we knit an elastic band for a hat twice as long what the margins should be... and then fold it in half. We stretch the bend slightly with our hands in breadth so that it protrudes with a visor.

Sometimes a fishing line is inserted into such a protruding bend of the elastic- this is done so that the edges of the fields do not wrinkle from wear, but always remain even and elastic.

Sometimes a corset tape is inserted inside the bend - for rigidity(the tape with which the trousers are hemmed below) - and with sewing threads (tone on tone) it is neatly and imperceptibly sewn with through stitches through the edge of the fields.

And here is a hat with WIDE lapels-brims .

Here, the lapel is knitted in the shape of a bell ... which has two sides (inner - light, and outer dark). Now we will make it with our own hands.

Such a hat must be knitted starting from the back of the head... that is, from top to bottom (since it will be convenient to adjust the scope of the fields ... and in which case, it will be convenient to dissolve them and knit again ....

A simple knitting pattern for this WIDE TWO-COLOR BRIM HAT…

Knitting this black hat with white fields - we start from the top ... just knit a straight fabric (or a straight pipe, if on circular knitting needles) ... The fabric of this pipe should be so long that it covers the head from the crown to the forehead.
We turn to white threads - and sharply expanding canvas from the edge of the forehead (adding loops in each row). A shape similar to a bell is formed (we reach the very edge of the fields - trying on in front of a mirror to decide whether such a width of the fields was enough for us). It was we who tied the white side of the fields (the one that is visible in the photo).
We change the threads to black ones and knit the Narrowing in the opposite direction (reducing the same number of loops in each row as we added before). ... this will be the reverse side of the lapel of the fields (dark) which is not visible, hidden-turned away in the photo.
It turns out a design in the form of ... first a narrow black pipe .... then an expanding white part... and then a narrowing black part.
At the widest point of the canvas(where the white turns into black again) we bend the canvas in half (we folded the fields of the cap in half ... And we sew this addition-we fasten it with threads - we fix this double sandwich of fields.
And then only remains sew the top crown seam of the cap - fold it with an envelope as seen in the photo and secure with threads ... and (if we did not knit on circular needles) we make the back seam of the cap.

Note - if you knit such a hat from thick dense threads, then the fields can not be made DOUBLE - without this they will turn out to be dense and upright .

(If suddenly it was unclear explained - write in the comments, I will explain in more detail and even draw ... and maybe even calculate the number of rows and loops in a row).

Knitted hat with brim - crochet.

And here is a MULTI-COLORED hat, which is crocheted. Crochet fields are generally easy to knit. There is no need to be smart here - know, drive the columns in a circle, sharply adding their number in the fields.

And then, at the very edge of the fields (on the last rows), you need to slightly reduce the number of columns so that the cap itself asks for a neat bend upwards.

KNITTED HATS -

WITH SOFT VALVES.

The fields of a knitted hat can be soft and easy to turn away to the hat... then we have an elegant lapel on a knitted cap.

Here in the photo below we see an example of how a ONE-SIDE SIDE lapel is made.
How exactly it is made, I think everyone understands.

knitting first top of the cap... And then we knit the lapel part itself as a separate long canvas on knitting needles (similar to a scarf). There is only one pattern - both from the front and from the wrong side we knit all the time one face loop... we get a ribbed pattern (it is thanks to this ribbed pattern that our fields keep their shape well).

Buttonholes are not required- just sew the edges of the canvas overlapping each other ... and sew on buttons for decoration.

Here is the front opening . The hat is knitted on two needles (without elastic) so that the fabric itself is wrapped up with a beautiful roll up. The pattern looks like RICE...

But the lapel, which is uniform around the entire circumference of the cap. It is decorated with a neat flower.

Hat with cuffs - soft angora.

And here is another fashionable hat - in it we see a non-standard circular knit - and the direction of the knitted fabric goes across - this made it possible to come up with such beautiful lapel fields.

Here the knitting direction is HORIZONTAL (and apparently in the shape of a trapezoid)... which is then sewn into a hat (if suddenly something extra is connected) you can always correct it with scissors (roughly) and close the cut with threads.

To be sure, we can first do Trial mock-up of a hat from a piece of an old sheet(to guess its shape) ... then knit the canvas according to the shape of the layout ... and fold such a hat.

And even better... tie such a hat ONE SIZE BIGGER ... and therefore REDUCE-Dump it (like a felt boot) in hot water (40 degrees) in washing machine... The knitting will immediately become very dense - the hat will become denser and one size smaller.

MORE ABOUT THE RULES OF FELTING I will tell you right now using the example of the following two hats.

HATS KNITTED WITH lapels - dried.

See what fashionable dried hats you can knit on knitting needles ... and dump in the washing machine.

They knit first larger than necessary. Then they are washed in hot water and the wool shrinks. decreases by 30% and the hat becomes plump and warm, as if made of soft felt fabric.

I’ll say in advance that both gray and pink hats are knitted according to the same instructions - this is the same model, it’s just that the manual drapery of the fields (with the help of hat pins) is slightly different.

A detailed description of the dumped hats from the photo above.

(gray and red hat).

Characteristics of the material and product.

200 g of yarn Wash+Filz-it! Fine

(100% wool, 50 g\100 meters No. 00120

circular needles No. 5, stocking needles No. 5
Buckle + pin, brooch, buttons (for finishing hat fields).

Product size before felting: head circumference 70 cm, height 26.5 cm.

Product size after felting: head circumference 54, height 20 cm.

Before starting work- you should knit a sample from the purchased yarn - mark a 10 by 10 cm square on it with a bright thread. Then dump this sample in the washing machine and check how it decreases.

According to the declared yarn- the density of knitting before and after felting should match the following:

Knitting density before felting: 10 x 10 cm = 16 sts and 22 rows

Knitting density after felting: 10 x 10 cm = 20 stitches 29 rows

And if your data is different (and this may be due to a different yarn, too tight knitting, or vice versa, your habit of knitting loosely and sweepingly), then you need to dial the number of loops on the knitting needles a little different. In accordance with how your prototype differs from the one shown above.

In order not to peer into the small print and encrypted abbreviations, I decided to paint step by step and in rows the whole knitting process and hat assembly.

STEP 1 - knit the main part of the brim of the hat.

We start knitting from the fields - that is, we collect 124 loops on circular knitting needles and knit circular rows with the front stitch. 20 rows in a circle. And we get the straight part of the fields (gray shading on the pattern of the fields). And we will only have to connect that part of the fields, which will be an elongated triangular shape in the pattern from the diagram below.

STEP 2 - start changing the shape of the fields

(narrow on one side and wide on the other side).

At a height of 9 cm (= after 20 circular rows) we knit short rows- every other row we will decrease by 10 loops. This is necessary so that our fields turn out to be different in level - on the one hand, our field will turn out to be wider (there will be more rows), and on the other hand, our hat field will be narrow (in the place where we reduced every second row by 10 loops). Now you will learn how it is done, and understand how it will look.

I decided write each row, which you knit - so that you can knit without bothering your brain by strictly repeating the steps described below.

So, at a height of 9 cm (after 20 circular rows), we knit short rows as follows.

We have 124 loops on the knitting needles. We start knitting 21st circular row but we knit this row not to the end, but to the last 10 loops of the row(that is, we do not knit all 124 loops that are on the knitting needles, but only 114 facial loops) , after which we stop and we need to turn the work back to front (so that the wrong side of the knitting is already looking at us) and we can knit in the opposite direction of the circle.

And in this back way we do 1 yarn over on the right needle and knit the 22nd row – the same reduced by the number of 114 loops, but already on the wrong side. We knit this amount to the end and turn our knitting back to the front side to knit the next 23rd row. Here's what it looks like in a picture (I hope I made it clear).

On this front side and knit 23rd front row- but we also do not knit all 114 loops - but again we turn the knitting without reaching 10 loops to the end. That is, in the 23rd row we must knit 104 front loops. And turn to the wrong side - to knit on it 24th row - 104 purl loops (before each purl row, do not forget to make 1 yarn over on the right knitting needle). And we turn back to the front side.

25th row we also do not knit 10 loops to the end - but stop at knitted 94 front loops- and turn to the wrong side. Where do we knit 26 row - purl 94 loops. And we turn back to the front.

This 27th row we also do not knit up to 10 purl loops - that is, we only knit 84 front loops. Turn knitting inside out and knit 28th purl row - 84 loops. And again we turn to the front side.

This 29th row we also reduce by 10 loops - that is, we only knit 74 front loops, and turn the knitting on the reverse wrong side, and knit 30 row - 74 purl loops. We return to the front.

This 31 row- we again reduce by 10 loops - that is, we only knit 64 front loops. Turn inside out - knit 32 row - 64 purl loops. We return to the front side.

This 33 row 54 front loops 34th row - 54 wrong loops. Expand to the front.

This 35 row- we again reduce the knitting by 10 loops - we knit only 44 front loops. Turn inside out and knit 36th row - 44 wrong loops. We return to the front side.

This 37 row- we again reduce the knitting by 10 loops - we knit only 34 front loops. Turn inside out and knit 38th row - 34 wrong loops. We turn to the front side.

This 39 row- we reduce the knitting by 10 loops for the last time - we knit only 24 front loops. Turn inside out and knit 40th row - 24 purl loops. And after that, we turn the knitting with the front side towards us for the last time. This was the last short row. We are back on the front side.

And now we can continue our usual circular knitting- together with all 124 stitches in a row.

STEP 3 - knit the main dome of the cap.

So, we have 124 loops on the knitting needles, already connected fields hang from the knitting needles (on one side of the circle, the fields are wider 40 rows high, on the other hand, narrower 21 rows high.). Now we will knit the hat itself - the part that is pulled over the head.

The first thing we need to do is seal the transition from the brim to the dome of the hat. To do this, we knit each loop in together with a crochet.

Here is one way to close the loops - with a hook.

So, we closed 12 loops - and therefore we have 112 loops left on the knitting needles. Of these, we will knit the dome of the cap.

We transfer these loops from circular knitting needles for 4 stocking needles- 28 loops on each of the four knitting needles. And we knit in a circle 30 facial rows up. (Our knit rises another 13.5 cm (excluding margins).

Now we stopped and marked every 14th loop on our knitting (you can pass red ribbons between every 14th loop). We will need these marks (there will be 8 of them) in order to properly reduce the cap (narrow the dome).

We noted and in the next circular row we knit each 14th loop together with the previous one (that is, we knit 13 and 14 together). As a result, we have 104 loops left on the knitting needles.

Next, we knit like this.
In every 4 rows - repeat the decrease(we knit the loop marked with a ribbon together with the previous loop). Doing so 3 times. (That is, 3 rows are simple, 4 we decrease - 3 rows are simple, 4 we decrease and 3 more rows are simply 4 we decrease - three such calls). As a result, we have left 80 stitches on needles.

Now let's get stronger.

In each 2 rows we make the same decrease (in the same places marked with a red ribbon). We repeat 6 times. That is, 12 rows we alternate one simple + one subtractive. As a result, we have 32 loops left on the needles.

And now we come to the end of knitting.

Three rows in a row we make a decrease - in each row. In the same places marked with a ribbon. And on the spokes we have 8 loops left.

We finish knitting: cut the thread, stretch the tail of the thread through these last 8 loops. and pull tight. We fix the end of the thread in the body of the cap (using a crochet hook).

STEP 4 - we roll the hat

in the washing machine

+ form its final form.

And here is a detailed description of how such hats knitted from wool can be DOWN IN THE WASHING MACHINE ...

We place a hat in a laundry bag.
Fall asleep in the washing machine colored laundry detergent. DO NOT add fabric softener or detergent for woollens.
Choose mode - delicate wash(it is with a large flow of water - we need this). Mode for washing wool is NOT NECESSARY.
Setting the temperature 40 degrees.
Best with a hat in the car shove something rough(like jees or towels) - to create additional friction.
We start washing - as a result of which the product will decrease by 1/3 (i.e. 30%) After that, we take it out - wring it out and wet it PULL-STRETCH to the size of your head ... (so that she remembers this shape) ...
and then we put it on a BLUE where it will dry. It is, of course, understandable that you do not have hat blanks in your household - n oh you can find a replacement for her- for example, a suitable size children's ball or a three-liter jar (to increase the size of the jar, you can wrap it with several layers of newspaper, fix it with tape and put on a bag for cleanliness) - put on a hat and leave it like that until completely dry.
After you have pulled the hat onto the blank, you must level its fields - stretch the fields so that on one side they are 9 cm, and on the other 15 cm.
AND UNTIL THE HAT IS DRY, we do its styling. .

Here is a photo to help you. We approach the mirror and try to lay the fields as shown in the photo. The instructions say this:

Gray hat styling: Align the margins (by 9 cm and by 15 cm). Turn the fields up (both the short and long sides. Take the edge of the short field turned up and turn its half down. Stab this place with a hat pin (buckle + wand).

Crochet hats are becoming quite popular today. The fact is that he is able to create very fabulous weaves. These unusual patterns can be easily done with a simple tool - a hook. But the talent of the master should not be put aside. Needlework is popular in many countries. Numerous ideas swirl in my head. Permanent models, schemes and ideas. Here are some ideas for creating a hat for such talented individuals. The most intriguing schemes, the newest patterns. We look, admire and, perhaps, begin to knit a hat according to one of the presented motives.

Crocheted hats with patterns

The abundance of options can be confusing. It is not always possible to find the scheme of the desired model. Although they are on the Internet. The fact is that many suffer from a lack of knowledge and now we will try to simply and quickly put all the common schemes on the shelves.

Single crochets are the most basic motif that a crochet hook can make. But it is dense, and it is often used to create coats and other outerwear. Some furniture accessories are made with this particular pattern.

Introducing the second option, which beginners begin to knit. It is also plump, but small holes are obtained between the posts. It can be used for hats and even bedspreads. "Grandmother's Square" consists of them - from columns with one code.

A little more complicated than "honeycomb". Here you need to be able to knit for the front and behind the wall. Hats and even blouses are neat. Plus, the pattern has a good thickness.

Unusual motifs with lush columns.

Very fond of openwork motifs.

Shells appeared later than other patterns.

The alternation of the slope creates a "tangle" crochet.

The “wave” motif is very similar to the shell. The model becomes more interesting if there is a combination of colors in one product.

Simple crochet patterns for hats: an overview of patterns

It is quite convincing to look at some of the models of hats from the top point and understand that even the simplest patterns can create a noble product that will not be embarrassing to wear. A small selection of the most elementary crochet motifs:

Alternating columns and columns with a crochet.

Half-columns with a crochet.

Intricate crochet patterns for hats

Hats can also be made from more complex patterns. These are different waves, lush columns and a combination of loops of different calibers. Very elegant and high quality hook motifs allow you to make interesting models caps. Not only summer models, but also autumn and even insulated winter hats.

The first difficult option is lush columns. If you study it in more detail, it is not particularly difficult. It is difficult for beginners to cope with it, and the canvas of the model is noticeably distracting. From such a pattern, a lovely hat in the ombre technique has been holding up with dignity for several seasons and is only gaining loving glances.

It seems that there is nothing more complicated than lush columns. But no! This scheme can confuse even the master. There are a lot of yarns, plus the presence of relief motifs. But the model is worth it to get confused a couple of times and eventually come to a charming hat with an attractive spiral.

Regular columns that have a special trajectory. It is, of course, stars. There is no person who would not peer into this pattern and would not try to decipher it without a diagram.

Volumetric crochet patterns for hats

Caps with voluminous patterns have always been liked by women and men. But these are not only unusual crochet motifs - these are additional emotions . The most desired patterns with their interpretation in the form of detailed and clear diagrams.

The combination of multi-yarn is available not only for knitting needles and their usual facial surface. Products from multi with a hook look very unusual.

Lush columns already look appetizing, and adding more crossing is very voluminous and very beautiful.

Schemes and descriptions of popular crochet patterns for hats

Not everyone can immediately take the yarn, hook and start to follow the scheme. Many people need to read what and how to do. And what can I say, because most knitters are women. It has always been difficult for them to navigate by maps, plans and also diagrams. Therefore, below are the two most chic patterns and, therefore, the most common with a small instruction.

Spit pattern from lush columns

You can crochet braids not only with the crossing of convex elements. It’s also a good option, but it was he who deserved more attention from fashionistas - these are braids from lush columns.

Well, not a wonderful weave of yarn? For such patterns, there are many schemes.

The circuit begins, as usual, with a chain of air loops. According to the scheme, rapport (elements that are then stably repeated) is 12 (air loops).

1 row: 3 lifting air loops, a column with one crochet through one air loop, 3 air loops, st. with one crochet in the loop of the first st. with a crochet (that is, two columns from one loop of the bottom row), 8 tbsp. with one crochet. (this is repeated to the end, but instead of 3 air ones - st. with one crochet).

Next rows similar to the first, but replace the columns along the edges of 3 air loops with lush ones.

Openwork crochet pattern for a hat

The simplest and very popular option from double crochets and air loops.

A chain of air loops is dialed. Next, three lifting loops. And immediately the canvas:

two double crochets in one loop;
two air loops;
two columns with a crochet in the loop of the first two columns.

Skip 2 loops between the elements. The next row should be knitted. for two air loops of the previous row.

Some important rules to create worthy products:

pay attention to the thread;
options with large holes are better for summer hats;
dense patterns of spikelets are very good for winter hats;
be sure to look at the rapport.

Very beautiful models can now be made independently. Maybe someone has already chosen a cool scheme from this article and started their beanie. Do not focus on one option and try your hand, maybe tomorrow you will be able to come up with your own pattern, name it and even make something very unique with it.

Knitted accessories have long conquered the hearts of fashionistas. They are warm, comfortable and practical. An important factor is that such models almost never go out of fashion. Women's winter hat crocheted, crocheted with your own hands, will be a worthy completion of the image and the object of envy of your friends. Help to make it step by step descriptions, diagrams and video tutorials by experienced craftswomen.

Features of crocheting a winter women's hat

For the winter of 2020, models of voluminous hats, elongated hats, stockings, berets, caps will remain relevant.

Of the decor for hats, fur pompoms, beads, beads and inscriptions are preferred.

To create a unique accessory handmade, you should start with the preparation of tools and materials:

Yarn is chosen, focusing on your taste, tactile sensations, composition and thickness. For winter models, a thick and medium thread with a natural wool content of 40 to 70% is ideal. The color is selected according to the type of appearance and the range of shades of the main wardrobe. The best, although expensive, is merino wool, it is soft, warm, does not cause irritation and allergic reactions on the skin.
Important! The addition of synthetic yarn to the yarn increases the wear resistance of the product, prevents rolling and prevents the growth of microorganisms.
The choice of tools must be approached seriously. The hook should be comfortable (ideally with a rubber handle), 15 cm long, without notches and hold the thread well. The required number is indicated on the yarn label.

If there is no information about the diameter of the tool on the yarn package, taking the thread in two strands will help. It must be pulled and hooked, if it fits completely in the recess, and there is no free space left, the tool is suitable.

Crochet patterns for a winter hat for women

To choose a pattern for a future product, you need to pay attention to the following points:

Complex patterns are not suitable for textured and melange yarns, they are not visible in the canvas. It is more expedient to choose the simplest ones, for example, garter crochet.
Openwork patterns with a large number of holes are not suitable for winter models. The exception is yarn with a long pile (mohair).
Dense patterns with lush columns look good. They are not only warm, but also give additional volume to the product.

Patterns for crocheting a winter hat for women are divided into several types:

Simple: double crochet and half double crochet.
Complex.
Volumetric.

Descriptions and patterns of crocheting a winter women's hat

When choosing a hat model for women, which is crocheted, you need to consider not only fashion trends winter 2020. It is worth paying attention to the shape of the face of the future hostess so that the work is not in vain.

Hats that will suit women with different types of faces:

oval - turbans, with pompoms, made of thick and medium yarn, berets, made of coarse knit;
round - beanie with and without pompoms, models with geometric patterns (square, triangle), caps;
rectangular - hats with lapels, preferably double, earflaps (classic), wide-brimmed hats;
square - beanies, berets, hats with arans and braids, earflaps with lowered ears;
triangular - cat hats (with ears), hats made of fluffy yarn, berets;
diamond-shaped - caps, beanies, hats with cuffs;
pear-shaped - large-knit products, three-dimensional models, snoods.

An important point is the removal of measurements. The diagram will help you make the measurements correctly:

It is important that the measuring tape fits snugly to the measured length.

The models proposed below with a description will help you create an accessory that is ideal for the future hostess.

AT step by step master classes abbreviations are used:

P - loop;
R - row;
RLS - single crochet;
CCH - double crochet;
PS - half-column;
PSSN - half-column with a crochet;
SS - connecting column.

Simple crochet winter hat

The simplest model with a lapel, made diagonally in garter stitch with a crochet hook.

A simple model is ideal for beginner craftswomen

What you need:

150 g natural wool yarn; tool of the appropriate diameter;
markers;
scissors.

Working process:

Start knitting a triangle from the base, which is equal to the girth of the head.

Connect a chain of VP equal to OG.

The next stage is the formation of a cylinder from a triangle in short rows, as shown in the photo below.

Pull off the loops of the crown, cut the thread, fastening 2 times, hide in a knitted fabric on the wrong side.

Crochet winter women's hat for beginners

Still a trendy beanie that is easy to make and comfortable to wear. Ideal for winter cold. The product is knitted not along, but across, therefore the initial number of loops is equal to the height of the cap (28 cm in the description).

Due to the increased length, the model drapes beautifully at the crown

Important! The thread for such a headdress should be mixed and of medium thickness.

What you need:

1 skein of yarn (100 g);
a hook of a suitable diameter (the size is indicated on the yarn label);
assembly needle;
scissors.

Work algorithm:

P1: knit a chain of 38 VP and 1 P for lifting.
R2: 27 SPB and 1 RLS (work starts with 2 loops).
P3: with 2 P 28 RLS, 1 P for lifting.
R4: 29 RLS, 1 PSBN.
R5: with 2 P 30 RLS.
Continue working according to the scheme (the top of the product will consist of 4 identical wedges):

This knitting method is convenient for beginner craftswomen who find it difficult to make calculations; the width of the cap can be adjusted directly in the process.

The working thread does not need to be cut, threading it into the needle, it is necessary to pull off the hole at the crown and connect the edges of the product with a neat seam. If desired, you can collect a hat with a hook.

Crochet winter hat for women with a beautiful pattern

The volume of this model is achieved due to the lush columns from which the braid is formed. The canvas can be monophonic or multi-color, it all depends on the desire and imagination of the needlewoman.

According to the finished description, you can knit a practical hat with a lapel or an elongated beanie without a seam (the work is done in a circle)

What you need:

1 skein of yarn (100 g) of medium thickness;
hook of suitable diameter.

Work process:

Knit a chain from the VP, equal to the girth of the head.
Continue working according to the scheme:

How to properly form the crown of a women's winter hat when crocheting a lush spikelet pattern:

Hat for women for the winter crocheted from bulky yarn

A bright oversized model made of thick yarn will save you from the cold even in the most severe frosts.

What will be required:

2 skeins of thick woolen yarn (100 g 100 m) melange shade;
tool with a diameter of 8 mm;
pompon.

Working process:

Dial a chain of 36 VPs, close the row in a circle of the SS, start to mark with a marker.
Run gum. P1: ch 3 to lift, all dcs, 1 sl-st to the last ch of the beginning of the R. P2: ch 2, 2 relief dcs, 2 RL, alternate to the end of the R.
Continue working with the main pattern as described (rows in the forward and reverse direction).
R1: VP 3, all SSNs.
R2: 2 VP, 2 embossed SSN behind the front wall, 2 PS, alternate to the end of R, 2 PS.
R3: 2 VP, 2 relief SSN behind the back wall, 2 PS to the end of the circle, 2 PS.
R4: 2 VP, 2 PS, 2 embossed SSN behind the front wall to the end of the row, 3 PS.
R5: 2 VP, 2 PS, 2 relief SSN behind the back wall to the end, 3 PS.
At a distance of 14 cm from the elastic band, knit all PS 2 together to give the product a shape.
The next row is to continue the reductions, embossed dc knitting together.
The next 2 CCH together, then 1 R only CCH.
9 P, which remained after the reduction, pull off, cut the thread and hide.
Tie the edge with a crustacean step.
Add pompom.

It is advisable to choose a pompom to match the yarn, but contrasting exceptions are possible

Women's crochet hat for the winter with a lapel

Those who think that it is impossible to crochet a takori hat are mistaken. Moreover, this model is suitable even for beginners.

Crocheted elastic looks about the same as classic knitting

What will be required:

yarn of medium thickness;
tool number 3.5.

Work process:

How to crochet a winter hat with posts

The original model in the Irish style will become a favorite accessory of any fashionista.

What will be required:

2 skeins of merino wool (50 g 120 m);
tool with a diameter of 3.5 mm.

Step-by-step instruction:

Link a chain of 96 VP, close the SS row.
R1: all sc.
Further, according to the proposed scheme 1, knit a fabric 8 (width) by 4 (height) rapports.
In the last rapports, knit all crossed loops together to form the crown.
Continue decreasing, in the central part of the diamonds, knit 2P together twice.
Pull off the remaining loops, fasten the thread on the wrong side and cut.

The Irish model will suit any style of clothing, even sports

How to crochet a beret hat for a woman for the winter

In the winter of 2019-2020, berets are incredibly popular again.

The model can be made using various techniques and patterns, it all depends on the experience of the knitter

The original three-dimensional model of the headdress, which is knitted in a spiral with embossed columns:

How to properly perform relief columns:

How to crochet a women's hat for the winter with a pompom

In this model, you can combine any colors, the choice of the craftswoman. The product is performed in a circle according to the scheme:

Rapport consists of 6 P + 1 P. Perform from 1 to 18 R, then the repetition goes only from 7 to 18. Each circular R starts with 3VP, ends with 1 crossed.

Important! It is necessary to carefully monitor the change in the color of the working thread.

What you need:

natural wool (50 g 65-70 m), each color (milky and light green) 4 skeins;
tools No. 4,5 and No. 6;
pompon.

Work process:

Link a chain of 60 VP with a tool of a smaller diameter, close the row into a SS ring (milky color).
Run plank. 6 rows: 1 VP, all RLS, 1 crossed.
Switch to a tool with a larger diameter and knit according to the scheme with the main pattern, alternating colors.
In 17 R of the main pattern, knit each 5 and 6 P together (beginning of decreases to form the crown).
In 21 R every 3 and 4 P.
In 23 R 2 and 3 P.
At the end of 25 R from the bar, cut the thread, leaving 30 cm, collect the remaining loops, pull off, hide the thread on the wrong side.
Decorate with a pompom.

For such a model, it is desirable to use a massive pompom to match the overall color scheme.

In order for the product to be comfortable to wear and fit well, it is necessary:

Accurately calculate the number of loops to work in strict accordance with individual measurements. Be sure to knit the sample with the main pattern and calculate the number of loops that are contained in 1 cm.
Conduct samples during the process. The density of knitting for each needlewoman is individual, therefore the calculations proposed in the descriptions are approximate.
Dissolve the canvas if it went in waves (faldit). The reason may be the wrong tool (too large) or too loose knitting. You can correct the situation with a smaller diameter crochet.
Do not save on tools and materials. The final result depends on this no less than on the work of a needlewoman.
Correct mistakes made in the canvas immediately, dissolving and bandaging, otherwise it will suffer appearance finished product.

Decorating finished products will add zest to the accessory. Usually natural and artificial pompoms, embroidery, beads, beads, patches and appliqués are used.

Conclusion

A crochet women's winter hat is quite easy to knit if you carefully read the descriptions and learn how to read the diagrams. In a couple of evenings, even a novice craftswoman will create an original model to her liking. It will look no less impressive than knitted, and for a long time will not lose its shape due to the special weaving of threads with a hook.

1. FASHIONABLE KNITTED HATS AND BERETICS FOR WOMEN THIS SEASON

Autumn painted everything around with bright juicy colors, it gets colder every day and even the first frosts are planned at night. It's time to think about updating your wardrobe not only with warm knitted sweaters and shirt-fronts, skirts and scarves, but also with stylish bright (and most importantly - warming from the cold) hats that will protect women's health from the constantly pursuing colds that are characteristic of the autumn-winter season .

And what could be more convenient and comfortable than hats or berets, knitted with your own hands from high-quality yarn according to the schemes of modern models?...

Choosing yarn for crochet:

This season, monochromatic models made of bright yarn will be relevant, under which you can hide your hair. The beret can be decorated with a flower (kanzashi) knitted or folded from satin ribbons.

◘ Headwear in the form crochet wide bandage.

Now this option will be as popular as last season. Wide knitted headband more suitable for girls long hair. Monochromatic models with a large accessory on the side (or a knitted flower) look elegant. For a sporty style of clothing, you can knit a wide bandage with a Norwegian pattern.

2. USEFUL TIPS FOR BEGINNERS AND SOME SIMPLE OPTIONS FOR KNITTING WOMEN'S HOTS WITH A HOOK

Useful tips for beginner knitters.

Start crocheting a hat from the bottom. First make two air loops. In the first inverted air. we knit a loop of 6 columns without a crochet. If you start knitting the hat fabric like this, you will be able to avoid the appearance of a hole. In the next row of the circle, you can double the number of loops = 12. Then knit in a spiral with single crochets and add 6 stitches in each circular row.

How to quickly knit a light summer hat:

How to tie a beret from Irish lace crochet:

3. SCHEMES AND DESCRIPTION OF THE STAGES OF KNITTING DIFFERENT MODELS OF HEADWEAR FOR WOMEN

Option number 1:

Option #2:

Option number 3:

WE KNIT A GORGEOUS SUMMER TAKE HOOK ACCORDING TO THE SCHEME WITH A DESCRIPTION OF THE STAGES OF WORK. EXCELLENT LIGHT MODEL FOR WOMEN.

Option number 4:

Option number 5:

Option number 6:

Option number 7:

Option number 8:

The scarf is crocheted from multi-colored mohair yarn with a beautiful fan border and an original asymmetric shape.

Size: width 83 cm, length 233 cm
You will need: yarn (70% mohair, 30% silk; 840 m / 200 g) - 200 g multi-colored; hook number 6.

A beret with a relief pattern can be knitted with multi-colored yarn so that the loop paths shimmer. Bound beret, it turns out not only colorful, but also voluminous and lush due to the pattern with embossed columns. Knit a scarf with the beret.

You will need 350g of yarn (70% acrylic, 30% wool, 70m/50g) sectional dyeing. Hook number 4.5

You can crochet a hat with a “braid” pattern according to this master class. Watch a detailed video of knitting a hat, which tells: how many loops to cast to start knitting, how to knit a ribbed elastic at the beginning of a hat, how to knit a “braid” pattern so that the transition at the end and at the beginning of a new row is not visible, and how to perform decreases in the pattern to knit a beautiful top.

Gazzal Rock'N'Roll yarn (50g/115m) - 3 skeins, hook No. 3.5 was used for knitting the hat.

Description of knitting hats is presented on the 52nd size of the head.

Unique crochet transforming scarf can be worn different ways, an air pattern and buttons will help to securely fix the results of transformations.

You will need: yarn (10% cashmere, 70% extra merino wool, 20% microfiber; 50 g / 140 m) - 12 (13) skeins of gray-blue; hook number 4.5; 7 buttons with a diameter of 22 mm.

Sizes: S/M (L/XL)

A crocheted hat with an “asterisk” pattern from lush columns turns out to be lush, voluminous , this model is now in demand. The crochet pattern “stars” from lush columns looks beautiful, it can be used for knitting a scarf, snood, sweater and other warm things.

To knit a hat, you will need 1 skein of Alize Angora Gold yarn (550m / 100g), hook No. 2.5.

The knitting of the cap starts from the crown, for the bottom a round motif is knitted, the circumference of which should be equal to the circumference of the head, and then the cap is knitted down with an “asterisk” pattern to the desired length with or without a lapel.

Lush and voluminous crocheted scarf makes a pattern with "bumps" of elongated loops. The scarf is finished with pom-poms, which harmonize well with the pattern of the scarf.

Dimensions: 25 x 190 cm / 35 x 265 cm

You will need: 5/9 skeins of cream (Sable) Phil Nuage yarn (72% merino wool, 28% polyamide, 148 m / 50 g); hook number 7; pompom making kit

For crochet hats an asterisk pattern is chosen, which is formed from lush columns.

Head girth - 56 cm
You will need: Krokha yarn (80% acrylic, 20% wool, 135 m / 50 g) - 200 g coral color, hook No. 3.

Master class knitting a pattern from lush columns.

This model is two in one from a snood connected by a pipe, you can make a hat, pull the lace along the edge of the placket to form the bottom of the hat.

For knitting you will need: 200 g terracotta acrylic yarn; hook number 4; darning needle.

Embossed faces. (convex) column s / n: tie st. s / n. inserting a hook from the faces. sides under the leg of the column of the previous river.

Knitting density relief pattern: 1 motif (16 p. and 6 p.) = 7 x 8 cm.