Topiary from tinsel for the new year. Stylish gift and decor element for the New Year with your own hands: master classes of New Year's topiary

Topiary is recognized as one of the most popular home decorations. It is a small tree made of artificial and natural materials, which you can choose at the discretion of the master to create DIY New Year's topiary for 2018. Their shape can be both traditional, rounded, and figured, for example, in the shape of a spruce. The size of such a tree varies from 10 cm to half a meter.

A popular New Year's topiary for 2018 can be a tangerine tree. Such a decorative element consists of natural citrus fruits, supplemented with decorative materials, and can act as an alternative replacement for a live Christmas tree. How to create it, will present a master class below.

For manufacturing you will need:

two dozen tangerines;
curved branch or snag;
flower pot;
a floral oasis or a piece of foam;
spruce branches and mistletoe leaves;
crushed foam as artificial snow;
a skein of linen rope;
pieces of wire for fixing a tangerine on a tree;
scissors and paper knife;
PVA glue.

A branch for crafts can be picked up on the street, but in this case it will need to be carefully processed: cleaned of dirt and debris, removing excess branches, and finally varnished. The curved shape will give the tree a spectacular look.

First of all, you should embellish the tangerines. To do this, they are wrapped crosswise with silver linen thread. To make them look more festive, you can purchase a shiny thread or lightly sprinkle citruses with glitter varnish.

A piece of wire is threaded under the threads and slightly bent. If the threads do not hold well, it is worth lightly lubricating them with glue in the center.

Then you need to create snow-covered spruce branches. To do this, they are lightly smeared with glue, so that the needles do not stick together, and then dipped in artificial snow. Leave them to dry for a while.

At this time, you can start preparing the base for the tree. From the foam or oasis, cut out a cone that fits the size of the pot and place it there. Next, you need to cut out a spherical base on which tangerines and mistletoe leaves will hold.

Now you can assemble the structure together. The branch is stuck into the base in the pot, and then a spherical base is put on its second end. Tangerines are attached with wire. For reliability, they can be lubricated with glue.

The gaps between the citruses are filled with mistletoe leaves. Their ends are threaded through the middle and stuck into the base. At the end, the composition is supplemented with spruce branches.

Candy Topiary

Do-it-yourself New Year's topiary for 2018 is easy to create from candy. Such options are extremely simple to perform and look very appetizing. With such sweetness, you can surprise your friends and relatives by giving them an unusual New Year's present and an excellent decoration for your home.

For manufacturing you will need:

flower pot;
foam ball and cube;
a sheet of colored cardboard;
stick for the trunk;
adhesive and satin tape;
200-300 gr. lollipops;
decorative glass stones.

First, the foam cube is placed in a pot. Then two lines are drawn diagonally with a marker and the center is marked. A stick should be stuck in the center of the cube, on which the base will be fixed.

To make the topiary look neater, it is recommended to cover the foam with a sheet of cardboard in which a hole for the stick has been previously cut out. It is important that the material is the size of a flower pot.

The Styrofoam ball is then carefully covered with duct tape.

Before completely pasting the entire ball, it is recommended to stick a stick into it, since it will be much more difficult to do this through the tape.

When the base is completely ready, you can start decorating it. Lollipops are placed as close as possible to each other, covering the entire area with them. After that, the bottom is smeared with a generous layer of glue and decorative pebbles or sweets are poured onto it. Finally, a bow is made from a satin ribbon on the trunk of a festive tree. Everything is ready. Optionally, you can upgrade the pot with ribbons.

Topiary from natural materials

Do-it-yourself New Year's topiary for 2018 may be deprived of a spherical base, consist of large pine cones and twigs, as well as New Year's toys. Such a tree may well replace a live Christmas tree in the house, in addition, the materials for its creation are inexpensive.

For manufacturing you will need:

Pine cones;
pine or spruce branches;
small Christmas balls;
flower pot;
wooden skewers for the trunk;
twine or twine for decoration;
gypsum mortar;
a small piece of burlap;
coil of thick wire;
glue gun.

First of all, you should fix a small piece of wire on each bump. It must be fixed at its base and twisted several times for reliability. The length of the remaining tail is approximately 7-10 cm. To form a ball, you will need about 10 of these cone blanks.

Then, one by one, the cones are connected together using the remaining length of the wire. distributing them evenly different sides, it is necessary to form the basis for the ball. It is also important to leave some space for the pine branches, which will give the topiary its final shape.

Next, you need to make a base that will serve as a trunk for the tree. To do this, take a few skewers and process their ends with a glue gun so that they stick together better and do not crumble. Insert the end of the wire between the skewers and securely fix it with silicone glue.

After that, gypsum is diluted to the consistency of thick sour cream and its pre-prepared pot is laid out. A stick is installed in the center and hold it a little until the material solidifies completely.

To make the trunk look more attractive, it is wrapped with twine or twine. The ends of the rope can be fixed with a glue gun.

Then the pot must be pasted over with a small piece of burlap, giving it the shape of a decorative bag. The edges should be folded alternately and fixed with hot glue. Next, the pot is tied with a bright satin ribbon. It is worth considering that when creating a topiary, you can use other means for decoration.

At the next stage, the crown of the tree is supplemented with pine branches. They are inserted between the cones and fixed with a glue gun. To give them a snowy look, they are covered with ordinary glue and dipped in crushed foam. Some branches can be decorated Christmas balls.

Topiary - herringbone

As mentioned earlier, the topiary does not always have a classic template in the form of a spherical crown. This tree is in the form festive Christmas tree and decorated with sweet candies in colorful wrappers.

To make this version of the topiary you will need:

Styrofoam;
coil of thick wire;
large candies in wrappers;
corrugated paper;
decorative rope;
cable with a diameter of 0.5-1 cm;
textile and plastic tapes;
small cones, balls and other decorations to your taste.

At the beginning, you should prepare a tourniquet, which will serve as a connecting link. To do this, the cable is wrapped with tape, you can use chintz or satin. The edges are fixed with hot glue. In general, the tourniquet can be given any shape at its discretion.

Next, you need to prepare a bell that will decorate the top of the topiary. It is worth noting that it can be seen with a small Christmas ball or a large bead. The edge of a long piece of wire is fixed on a bell. To compact it a little, the wire is pasted over with paper.

After that, they begin to work with a foam cone, the basis for the Christmas tree. You can buy a ready-made cone in the store or carefully cut it yourself. A rope is glued to the base and gradually begin to wrap the figure around it. It is worth noting that sisal, a synthetic fiber, is also perfect for this.

Before you completely cover the cone with a rope, you should insert a wire with a bell into its top. Photo 29 shows the recommended length to be left. After the rope covers the figure, it continues to wrap the wire to the very base of the bell. The end is fixed with hot glue.

Then the bottom of the cone is glued with sweets. They are glued by the tails, pressing the sweets tightly against each other to fit as much as possible. In photo 31 you can see the result. You can also fill the remaining space with cones and balls.

The next step is to create a base for the topiary. In this case, a diamond-shaped foam is used for it. It is pasted over with paper, ribbons and rhinestones to taste.

At the end, the tree is attached to the stand and the last decorative elements are added: various ribbon bows, flowers from corrugated paper, colorful beads and more.

Topiaries made according to this principle have many different designs. The photos below show the options for decorating these holiday trees.

New Year's masterpiece - mini tree

The next topiary is a real work of art. A Christmas tree garland was used to decorate this tree. It is not a mandatory component, but it looks very impressive, especially with the lights off.

To create you will need:

sheet of A3 paper;
mounting foam;
wire 3-4 mm thick;
double-sided thin tape;
sisal fiber;
ceramic pot;
glue gun;
ordinary tape;
stick for a tree trunk;
decorative tape;
beads and garland.

You can choose other decorative elements if you wish.

To form the base, it is necessary to roll the paper into a cone and secure it with adhesive tape on both sides. The diameter of the cone should be slightly wider than that of the pot.

Then the cone is filled with mounting foam. It will be enough to fill it up to the middle and leave it overnight. After complete drying, all paper is carefully removed. It is recommended to trim the bottom with a knife so that it is even.

After that, the stick is placed in the center of the pot and filled to the middle with foam. It is recommended to hold the stick so that it does not move until the material hardens. In the photo, the foam has already hardened.

At this time, you can do the Christmas tree itself. To make its top more expressive, you should take a piece of wire and twist it slightly, and then stick it into the cone. Then the entire Christmas tree from the very tip to the base is covered with double-sided thin tape. Do not confuse thin tape with narrow tape.

Next, you need to carefully wrap the garland around the figure. It is important not to damage it, otherwise it will stop working. The length of the garland should be enough to completely wrap the topiary and only a box for changing the mode will remain below.

Then the entire surface of the cone is covered with sisal. This material has a fibrous texture. Opening a small piece, you should evenly cover the entire crown of the tree with fiber.

Finally, the stick is stuck into the cone and they begin to decorate the Christmas tree. If desired, you can stick a little wool on top of the mounting foam in a pot, imitating fluffy snow. And wrap some bright beads around the festive tree. By experimenting, a variety of design options are obtained.

Despite the fact that the New Year is still far away, even now you can think through interesting and original ideas for gifts and decorations. The usual Christmas tree, garlands and pompoms, of course, is a good thing, but sometimes the soul wants something new and original. Recently, topiaries (fancy trees made from a variety of materials) have become very popular.

Such an element of decor can be put on a festive table, on a fireplace, a window, or used as a gift. So you can do DIY New Year's Topiary 2017 than immeasurably surprise and delight guests.

On the Internet, you will find many different variations to create this amazing item. In this article, we have included the most interesting and affordable ideas that anyone can do.

Topiary from Christmas balls

To make such a New Year's decor, you will need:

Christmas balls of small sizes, matching in color with each other;
The basis for the topiary (it can be made from papier-mâché or take a foam ball);
Palua trunk;
Flower pot;
Floral oasis (sold in flower shops);
Details for decor (tinsel, sparkles, bows, etc.);
Glue gun.

Step 1. If you purchased a pot that does not fit the New Year theme, then you can decorate it with a bright satin fabric, for example, red.

Step 2 After that, a floral oasis should be placed inside the container. Suddenly, this is not at hand, then you can replace it with foam.

Step 3 The trunk of the future topiary must be fixed in the center of the pot. For such a stick, an ordinary strong branch or a cardboard tube is perfect. Decorate it with beautiful ribbons and it will look wonderful. At the base you can put a shiny tinsel.

Step 4 Now you need to attach the same floral oasis or papier-mâché ball to the trunk. Let's say you use an oasis, then before inserting the balls into the base, you need to attach toothpicks to them.

Step 5 If large gaps are visible between large balls, close them with small balls, cones, bows or other decorative details.

Step 6 To keep the toys better, it is advisable to glue them together with glue at the end of the work.

Topiary from tangerine

You can make this craft from any other edible materials. Let's focus on tangerines this time, because they are an obligatory attribute on the New Year's holiday.

To make a tangerine topiary, you will need:

Tangerines;
Twine or any other decorative rope;
Flower pot;
A branch or snag on which the ball will hold;
Scissors;
Styrofoam or floral oasis;
Christmas tree branches or mistletoe for decoration;
Hairpins for strengthening tangerines;
artificial snow;
PVA glue.

Step 1. First of all, you need to wrap the tangerines with twine or that decorative rope that you have in store.

Step 2 Coat the ends of the pine branch with PVA glue and lightly dip in artificial snow.

Step 3 From a floral oasis, make a cone so that it sits easily but tightly in a pot.

Step 4 This part of creating a tree is the most difficult and responsible, so be careful. Insert the branch into the oasis so that it does not dangle. At the top, fix the second piece of the oasis, giving it the shape of a ball. Thread hairpins through tangerines and stick them into the oasis. Decorate the gap between the fruits with leaves.

Step 5 At this stage, the manufacture of the topiary ends!

Candy Topiary

Topiary of candies will be an excellent festive one. It will be great if you find red and white lollipops, but others will do. The main thing is that they are bright.

To make candy topiary you will need:

Styrofoam ball;
Beautifully curved stick for the trunk (you can take a regular cardboard tube);
Satin ribbon for decoration;
Styrofoam cube;
Flower pot;
multi-colored pebbles;
Adhesive tape to match the candy;
300 grams of lollipops.

Step 1. Dip a Styrofoam cube into the pot and insert a stick into it to hold the candy ball.

Step 2 Cover the base with cardboard, as shown in the photo.

Step 3 Take a styrofoam ball and cover it with duct tape, on which later attach the lollipops. Of course, you can do without the tape and stick the candies with hot glue, but then you will have to decorate the gaps with additional details.

Festive topiary

This workshop shows how you can make a candy topiary in just a slightly different style.

To make a topiary you will need:

Styrofoam;
Candies;
Wire;
Cable;
Decorative details: buttons, balls, ribbons, flowers.

Step 1. Wrap cable decorative tape and make a tourniquet.

Step 2 Take the wire and attach a small bell to it, then you can also wrap it with decorative tape, fix the end firmly.

Step 3 It is necessary to make a cone from foam plastic (it will be the base of our Christmas tree). Glue the sisal thread at the bottom and start wrapping the product. Note that their sisal topiary always looks attractive.

Step 4 Try to wrap the cone tightly, occasionally smearing the base with glue.

Step 5 At the top you should attach a wire with a bell. Just insert it inside the cone. Bend the end a little.

Step 6 Insert the cable into the lower part and only after that start decorating the product with sweets.

Step 7 Take a small glass, fill it with a floral oasis and insert a New Year's product into it.

Step 8 As a decor, use your existing beads, rhinestones, tinsel, bows.

Topiary “Cockerel”

As you know, 2017 will be the year of the Fire Rooster. For those who want to truly surprise guests, we suggest paying attention to this one. It tells you how to do New Year's cockerel with your own hands. Topiary is easy to make and will not take you much time.

To make the topiary "Cockerel" you will need:

Fabric of different colors and textures;
Satin ribbons;
Scissors;
Pattern cockerel;
Pot;
Two thick wooden skewers;
artificial grass;
Product filler.

Step 1. Print out the pattern below. you can use different drawings, the main thing is that the cockerel looks beautiful and festive. Attach the pattern to the fabric and mark the borders of the product. The photo shows that the top of our cockerel will be made from one fabric, and the “panties” from another. Having finished cutting out the parts of the product, you must stitch them from the wrong side.

Step 2 Each of the sticks on which the rooster is located should be wrapped with the remnants of the fabric and stuck into the toy. Sew the holes carefully.

Step 3 Attach the wings. Draw the eyes, a slight blush. You can make a tail out of bright satin ribbons.

Step 4 Sew on the beak, and at the top you can attach a crown or scallop.

Step 5 You can pour a little earth into the pot, and add gravel on top. Decorate it all with artificial grass. Hang a soft egg on one of the wings. New Year's typiary is ready! With this product, you can fantasize and add new details - it will still turn out to be cute and festive.

Despite the fact that December has just begun, I already want to new year holiday. What will create good New Year spirit better than a tree? Although, in recent years, New Year's topiaries have also become very popular. Such a small tree can be put on a festive table or decorate an office with it. In addition, the New Year's topiary will be a great souvenir!

We have already talked about what a topiary is and what are the basic principles for its manufacture. Today we’ll talk about what features the New Year’s topiary has.

Before you start making a topiary with your own hands, decide on its shape. The shape can be either round (traditional) or curly (for example, in the shape of a Christmas tree).

Christmas topiary ball

The principle of creating such a topiary is similar to the previous one, just instead of Christmas toys, you can use pine cones.

First, we glue cones to the base in the form of a ball, and then fill the gaps between the cones with various decorative elements (beads, bows, small Christmas balls). The main thing is not to overdo it with decoration.

If we take a cone and spruce or pine branches as a basis, then it will also turn out pretty nice:

Video master class on creating a New Year's topiary from cones and Christmas balls:

Topiary from edible materials (nuts, sweets, tangerines)

"Mandarin" tree

It's no secret that tangerines are a favorite New Year's treat. Therefore, we will consider the process of creating a "tangerine" topiary in more detail.

Prepare the following materials:

tangerines
a skein of linen rope (can be bought at any garden and flower shop)
a flower pot from which our tree will actually grow
a beautiful branch or snag, strong enough to support the weight of tangerines
scissors and paper knife
piece of styrofoam or floral oasis
sprigs of spruce and mistletoe leaves for decoration
pieces of wire to strengthen the tangerines on the tree (a set of small hairpins will do)
artificial snow (it can be crushed polystyrene or anything else, the main thing is that it looks like snow)

We take our tangerines and wrap them with a rope crosswise. We strengthen the wire as shown in the photo:

We coat the branch lightly (so that the needles do not stick together) with PVA glue and dip it in the snow.

We cut out a cone from polystyrene foam or an oasis, which can easily fit into our pot in shape.

We proceed to the most difficult and responsible part. We strengthen the branch in the oasis so that it does not hang out. We begin to tie tangerines to one another, starting from the bottom. There will be fewer tangerines at the bottom, a little more in the middle, the same number at the top as at the bottom. Then we decorate all this charm with leaves and twigs.

Do-it-yourself New Year's topiary is ready! You can safely decorate the festive table with them.

Remember that tangerines are a perishable product, so it is better to make such a tree on the eve of the New Year. As a worthy alternative, you can use decorative tangerines - plastic or made from polymer clay.

Candy topiary

What do you think of the idea of a New Year's candy topiary?

The materials are the most standard: a foam ball, a barrel stick, a pot, satin ribbon for decor, a foam cube, duct tape and 200-300 grams of candy.

Pay attention to how you can fix the barrel in a foam cube, as well as decorate it:

And also see how you can glue the foam ball with colored adhesive tape so that you do not need to additionally decorate the gaps between the candies:

The principle of creating a topiary is similar to those described above, but these 2 tips can be very useful to you.

It can decorate any holiday. To make such a tree take on a New Year's look, use appropriate decorations, for example, a Santa's cap:

Or make a Christmas tree-shaped coffee topiary:

Topiary made of sisal, fabric or felt

There are a lot of materials for creating a Christmas tree. For examples and patterns, you can refer to the article. Make a Christmas tree according to any of the methods and fix it in a pot. Topiary is ready.

The main element of the New Year's decor - an elegant Christmas tree - can not always be installed in home interiors. Sometimes there is not enough space in the room to accommodate a large Christmas tree, and small copies of New Year's beauties are used as a replacement.

You can make an imitation of a small Christmas tree with your own hands, using improvised means and spending a minimum of time. They are called topiaries (translated as trees of happiness) and can be used not only as an interior element, but also as a present for guests on New Year's Eve.

The possibilities of decorating such Christmas trees and trees can be limited only by your imagination: for decoration, you can use almost any material that comes to hand.

But some topiary design ideas have already become traditional, so let's learn how to create together original jewelry for your home, having completed a master class on New Year's topiary with your own hands.

New Year's topiary do-it-yourself photo

New Year's topiary: manufacturing options

Surely you have paid attention to ready-made topiaries that are sold in stores: from the outside, such decorations look complex and professional, but in fact, you can make an even better and more original Christmas tree with your own hands.

Our master class of Christmas tree topiary will tell you how to create such decorations without having the skills to make decorations and accessories yourself.

The main feature of such decorative elements is the interchangeability of decorations used for decoration.

Reduced copies of Christmas trees can be decorated in different ways, focusing on the color scheme and variety of New Year's interior designs.

By the way, do not limit yourself to creating mini Christmas trees: topiaries can also look like small trees decorated with New Year's toys and other devices.

Do-it-yourself New Year's topiary: master class, photo

Decide how your topiary should look like: depending on the shape, size and features of the decor, you will have to use different materials. Stock up on everything you need - and you can transform your room in a short time, focusing on a photo and a do-it-yourself New Year's topiary master class.

Necessary materials

To create a Christmas tree topiary with your own hands, you may need the following materials and tools:

foam ball, papier-mâché, plaster, plastic or a large Christmas ball to be used as a crown. If you decide to create a small Christmas tree, use strong paper or cardboard;
flower pot, yogurt cup, a small box or other container in which the finished tree will stand. Keep in mind that the topiary must stand firmly in such a base, so do not choose too small size options;
pencil, wide wire, knitting needle, branch or other axis, which will be used as a holder for the finished structure;
potting materials, which will quickly harden after use: for example, gypsum or cement;
glue or a similar mass that will securely fasten all the decorative elements, as well as the components of the New Year's topiary;
decoration accessories. Give preference to the brightest and most brilliant accessories that will emphasize the triumph of the holiday;
permanent paints and brushes. They will be used to decorate some parts of the Christmas tree, for example, to paint a pot or create an imitation white snow on the surface. Best Option- water-soluble acrylic paint.

When all the materials and decorations are prepared, you can start following the step-by-step instructions for the New Year's topiary with your own hands: if you wish, you can decorate Christmas trees or trees using your own ideas.

New Year's topiary photo

Preparatory work

How to make a New Year's topiary? The first step in this process should include preparation of the crown of the future tree. It will be easier to create an imitation of a small Christmas tree: just choose strong paper or cardboard and roll it into a cone shape.

Advice: if you plan to decorate the Christmas tree with heavy toys and accessories, you should not make the inside of the base hollow. It can be stuffed with cotton wool or foam rubber, or a ready-made cone can be made from wood, plaster and other materials.

More often the conical base of the Christmas tree is wrapped with a wide thread: firstly, this approach allows you to disguise the material, and secondly, it serves as the basis for further decoration, as it allows you to attach almost any accessory.

If you plan to create a tree, its crown will be a large ball. Many prefer use a regular large Christmas ball, but if you do not have such an accessory or you are afraid that it may deteriorate and lose shape, choose more reliable materials.

For example, foam plastic is great as a ball: glue a large cube from small foam pieces and cut off the excess parts with a clerical or wallpaper knife.

Remember! Solvent-based glue will corrode the foam, so it is not suitable either for gluing individual fragments of the ball, or for subsequent stickers of jewelry and accessories.

To ensure that the finished styrofoam ball has a flat surface, smooth the base with your hands.

Minor flaws can be masked with accessories, so you should not waste time fixing all the flaws. Incidentally, this approach give topiary and other unusual shapes: Christmas trees with an inclined end are made that way.

This ball can be immediately pasted Christmas decorations or other decorations.

Another option for creating a crown ball is use of balloons. Puff them up the right sizes, wrap with a thread over the entire area - and carefully process with glue. After the surface has hardened, you can deflate the ball and pull it through the base.

The second stage of creation Christmas trees topiary is making an axis on which the finished decoration will be held. The trunk of a tree or Christmas tree can be made from a small twig or tube, plastic sticks or pencils.

If there are no improvised materials suitable in shape and size, create an axis yourself cardboard or papier-mâché.

Don't forget that the trunk must withstand not only a ball or a cone, but also all decorative elements that will be involved.

Such elements are connected very simply: if it is polystyrene, the barrel is lubricated with glue and inserted inside. If this is a stronger base, you will have to glue the elements without inserting into each other.

Advice: decorate the trunk of the tree in advance using paints, sparkles, varnish, bright threads or beautiful paper. After connecting the two parts, it will be more difficult to transform it.

If you want to create a tree or Christmas tree that can be tilted in different directions - use thick wire as a pole. Such an axis will look more original if you pick up wire of different sizes or colors - and weave it together.

New Year's topiary with a flexible trunk

Base for topiary

Do not forget that the basis for your Christmas tree should be both stable and beautiful. The standard way to decorate the base for a topiary is to use a small flower pot. It can be painted in New Year's pictures, decorated with cotton wool imitating snow, or transformed with the help of threads, bows, coffee beans.

Instead of a flower pot, you can use a small vase, jar, plastic cup. Even matchboxes are suitable for small Christmas trees.

Do not forget that the originality of your craft will depend on appearance bases, so you can show your imagination and make the base of non-standard shapes with your own hands.

To create a pot or foundation for a Christmas tree, you can use the papier-mâché technique. Prepare a small vase, paper or newspaper, glue, scissors and a brush. Treat the vase with petroleum jelly or a fat cream, wet pieces of paper - and stick it on the prepared surface. All subsequent layers of paper are applied in the same way, but coated with glue for reliability.

For convenience, you can use paper of different colors so as not to get confused in the layers. As a rule, five to six paper layers are enough for a strong base.

When the appliqué is dry, you will be able to remove the paper from the base of the vase without any problems. Such the pot can immediately be attached to a tree pole. A material like gypsum or cement is poured to the bottom. The mixture is diluted with water (do not start by pouring liquids, as the base will get wet, and the dry mixture will affect the respiratory tract).

A tree is immediately attached to the solution and held until the base hardens. If desired, at this stage of work you can decorate the post and the inside of the pot: use beads, beads, rain, coffee beans and other decorations. Such elements will serve as an additional holder for the entire composition.

At the next stage of the master class on New Year's topiary, you can start decorative work. After all, such a tree should replace Christmas tree- which means that decorate it should be no less bright and interesting.

Decor methods

There are many different ways to decorate such mini Christmas trees. If you like standard imitation Christmas tree- use small Christmas decorations and rain. Garlands and tinsel are useful as decorative elements, but try not to overdo it with decor: sometimes an abundance of accessories can make the Christmas tree tasteless.

To complex, but interesting ways creating a bright and festive Christmas tree using a plastic ball. Holes for garlands are drilled inside it.

Using the ball as the top of a tree and decorating with other accessories, you will create bright element New Year's interior. Such a topiary can be placed on the table or the darkest areas of your room.

Most toys and decorations are attached to the topiary with hooks, glue, or double-sided tape. If the Christmas tree or ball is wrapped with thread or fabric, you can sew accessories to the prepared surface.

What other decorations are suitable for decorating New Year's topiaries? We present you the most common design ideas:

creation of small copies of plastic or felt toys to imitate a real Christmas tree;
attachment of small cones(if desired, they are decorated with sparkles, paint or decorative snow);
use of small Christmas balls of different colors;
decor with tangerine and candy;
decoration with bows or ribbons over the entire area of \u200b\u200bthe tree and its pillar;
gluing coffee beans around the base of the ball or cone or in the form of separate compositions;
usage rain or small spruce twigs;
gluing beads and beads to give brightness to the New Year's composition.

Usually, in the New Year's interior of the rooms, several topiary of this type are used at once. They can be made in the same style to follow a given design theme, or they can be made different in color, brightness and shape - and placed in different areas of the room.

Since the creation of a topiary Christmas tree with your own hands involves decorating for every taste, a variety of Christmas trees and trees can be presented to your guests and loved ones. Such crafts will harmoniously fit into any New Year's interior and emphasize the solemnity of this night, therefore they are increasingly used not only as a replacement, but also as an addition to an ordinary Christmas tree.

Now you know how to diversify christmas decor and make the festive evening even brighter and more interesting. Watch the video tutorial by Elena Rogacheva on how to make a decorative topiary with your own hands from improvised materials:

Follow our advice, implement your ideas - and decorate your room with the Tree of Happiness in New Year will be unforgettable.

Master Class. DIY interior decoration for the New Year

Christmas tree - do-it-yourself topiary

Tsybanova Galina Anatolyevna, Lecturer, Tver Trade and Economic College
Purpose: I like to decorate my study room for the New Year.
But in the computer class, every square centimeter is occupied, so a small Christmas tree-topiary will come in handy. It is not a shame to give such a tree, you can even put it on the festive table.
Target:
- develop creative abilities
- cultivate imagination and fantasy

Hello, New Year's holiday,
Christmas tree and winter holiday!
All my friends today
We'll invite you to the Christmas tree.

Shine, Christmas tree lights,
Call us for a holiday!
Fulfill all desires
Make all your dreams come true!

For work we need:

1. Materials for the Christmas tree itself:
A sheet of thick A4 paper (I use drawing paper)
Aluminum wire 40 cm long
Styrofoam 8x8 cm
Lining fabric 10x10 cm
Green thick threads for the Christmas tree itself and brown for the trunk
PVA glue
Glue "Moment"
Two types of sequins
Christmas tree beads 50 cm
Braid for the bottom 30 cm
Ribbon for bows 30 cm

2. Materials for the pot:
A plastic cup
Building plaster
Burlap 20x8 cm
Lining fabric 8x8 cm
Sintepon 8x8 cm
Ribbon for decoration 20 cm (2 pcs)
Candy wrappers (for "gifts")

3.Tools:
Scissors
Ruler
Pen (or pencil)
pliers

Christmas tree making process:

1. Fold the "bag" from a sheet of paper, adjust its width along the bottom.
Coat the edges of the paper with PVA glue and press firmly.
2. Attach a ruler to the top of the cone and measure it in the shortest part
(this is the maximum possible height of the Christmas tree). Then, holding one end of the ruler
and gradually turning the cone, make marks of the same length along the entire lower part.

3. Cut off excess paper with scissors. The base of the tree is ready.

4. Put the cone on a piece of foam, circle the circle and carefully cut out the bottom.

5. Prepare the “trunk”: wrap a piece of wire on one side with brown thread
about 1/4 of its length. (I did not do it right away, so I experienced inconvenience)
6. With the upper part of the “trunk”, pierce the center of the foam circle and insert it
into a cone so that it protrudes 7-10 cm above the top and bend it with pliers.

7. Lubricate the bottom on the sides with PVA glue and insert into the lower part of the paper cone.
You can additionally stuff crumpled paper (newspaper) inside the cone so that the cone itself
did not deform during subsequent manipulations.
8. Make a hole in a piece of lining fabric 10x10 cm, put it on a wire
from below and carefully glue with PVA glue to the bottom, covering the entire foam.
For insurance, you can wrap the edges of the fabric along the bottom of the cone with several turns of thread.
I wrapped the entire cone with a thin thread lubricated with PVA glue for a better subsequent
adhesion to the main thread.

9. Fasten the green thread at the base of the cone, grease the cone
about 2 cm with PVA glue and wrap tightly with thread so that there are no gaps.
Then grease and wrap the next 2 cm, etc.
I did it in such a way that it was more convenient to hold the product and not get my hands dirty.

Here it is done...

10. The turn has come to the pot. Prepare the required container:
if the pot is small, the tree may collapse, and if it is too large, it will be ugly.
I cut off the yogurt cup.

The bottom was covered with lining fabric 8x8 cm, glued on PVA.
The sides were pasted over with burlap. The excess burlap was folded inside the pot.

11. Then you need to prepare a solution of gypsum, diluting it with water to a pasty state.
Here I cheated a little: I added a handful of river sand to the finished solution - and I saved gypsum, and the solution turned out to be heavier, which means that the stability of the future product is better.

The pot must be filled with gypsum mortar almost to the top.
12. It's time to insert the base of the tree trunk and the center of the pot and tamp the solution around it.
You can use the blunt end of the pencil, after wrapping it in cellophane.
The solution will "settle" and there will be a place for "snow". Now we need to leave our product for a couple of hours or until the next day, so that the solution hardens properly.
I had to put the Christmas tree "in the corner" for preservation.
Here I was so carried away that I forgot about the camera
13. Decorate the pot. The junction of the burlap can be sealed with tape.
Lay a synthetic winterizer around the trunk.
Glue the braid with Moment glue on top of the pot and around the base.
Attach bows and sequins if desired.
Under the Christmas tree - "gifts" of candy wrappers (there are also candy wrappers inside).

14. The final stage: decorating the Christmas tree itself. Attach tape first
along the bottom of the cone to further secure the threads and cover up possible flaws.
Then Christmas tree beads, individual beads, sequins, bows - and everything is glued "Moment"
(PVA dries for a long time).
Here is our beauty with her friends from "grass" and "swan's down"

And two more babies are born :)

And she herself has already taken pride of place in the computer class and reminds my students that the New Year is coming soon and it's time to take tests

P.S. Thanks for attention.
This is my first masterclass. Lots of work, lots of ideas.
I already see my mistakes and lack of photos, I promise to improve