How to sew a detachable collar with your own hands. How to make a collar necklace with your own hands

When creating a new thing, most stylists focus on some little things: neckline, sleeve length, cuff width or collar model. Such small details are able to set a particular style for a wardrobe item and point out certain character traits of its owner.

Recently, special attention has been paid to collars, which are able to revive and update even the most boring and out of fashion dress. Even if the outfit itself does not imply its presence, the collar can be sewn with a pattern and small pieces of fabric at hand. We will learn how to independently build a pattern and sew an embellishment for a dress with a round neckline.

They are traditionally divided into 3 categories:

According to the shape, the item of clothing is divided into:

Which collar goes with a round neck dress

For dresses with an open round neckline, the turn-down "Peter Pen" is best suited.". The main feature of this species is the presence of protruding rounded edges. In front, such edges are wide, they narrow only towards the back.

Things decorated with a Peter Pan turn-down collar look very sophisticated. Such dresses are worn by both little girls and schoolgirls, as well as older ladies.

We build a collar pattern for a dress

The Peter Pan pattern is very easy to build. The whole process, even for not the most experienced needlewoman, will not take more than 5 minutes.

Process step by step:

As a basis for the pattern, you will need a pattern of the main details of the dress.
The measurements that will be required are the sum of the lengths of the necks of the front and back parts.
The first dot is placed in the upper left corner.
From it to the right lay the length of the neck of the back with an increase of 1 cm.
From the initial point lay 3 cm down and put a mark. It is connected to the rightmost point of the straight line segment.
Vertically down from the original point lay the width of the product.
A smooth bend of the lower part is laid along the lines formed.

The scheme is transferred to the fabric, not forgetting to leave a little fabric for the seams.

Advice! If you want the collar to be rigid, a more stable and dense material, for example, interlining, is hemmed under the main fabric.

How to sew a collar for a dress with your own hands

After the pattern is ready, you can proceed to sewing the collar. To do this, use the following instructions.

The pattern must be transferred both to the main fabric and to the interlining. The result should be 4 parts from interlining and 4 parts of the product itself.
Details are glued with interlining.
Having attached the parts with the right side to each other, they are sewn along the outer bend.
The details are turned out “obvious”, ironed well and stitched along the outer bend, stepping back about 2-3 mm from the edge.
The inner fold line is processed with an overlock or a zigzag seam.
On the dress, for which the collar is being prepared, basting is made using small pins.
The collar is attached to the dress along the neckline.
To securely fix the accessory, it is attached along the entire cutout line.

The sewn collar can be decorated with lace or braid sewn along the edges. In the middle, you can attach a large brooch or a small rhinestone, which will shimmer when it falls under the rays of light.

Collar as an accessory

With the help of overhead accessories, you can make the same dress “sound differently”. Having several such accessories on hand, you can make a festive and cheerful dress out of a strictly outfit, or, on the contrary, give more seriousness and severity to a youth “bow”.

With your own hands, a false collar can be made:

A properly selected and skillfully tailored collar can revive even the most seemingly hopeless dress. In the process of work, you must be as careful and attentive as possible, and then the result will not disappoint you.

Good afternoon our dear readers!

In the next modeling lesson, we will analyze one of the most interesting and extensive design topics - collars.

To start modeling collars, we need to have (Fig. 1). To do this, there is no need to perform calculations and build it with rulers and a pencil - just go to the main page of our site, select "basic dress pattern" and indicate your measurements. Then the program will instantly build your individual pattern, you can print it even on an A4 printer. Instructions on how to do this are on the page.

Let's start our "dive" into the topic of modeling collars with the most simple and understandable - stand-up collars.

All stand collars are built in the same sequence, only they have different values \u200b\u200band line configurations. Collars can be with rounded or straight ends, overlap each other and be modeled end to end, more or less close to the neck. The clasp can be located both in front and behind.

Let's now analyze the construction of the stand collar as on a green blouse (Figure 2a).

To build a stand collar, you need to measure the length of the neck of the back and front. We get a specific number (for example, 20 cm). Then subtract 0.5 cm from this value and set aside this value in a straight line. To prevent the stand from moving away from the neck, we raise the front angle by 3-4 cm (the larger the value, the tighter the stand will fit to the neck). Now we set the desired height of the rack (3 cm). And we draw the smooth lines of our collar - the stand. Remember to keep the rack height constant! A blue control notch separates the front and back of the collar - when sewing the stand collar, you will align it with the shoulder seam.

Figure 2b shows a drawing of a stand collar as on a blouse with an ornament.

The sequence of drawing the collar remains the same. In a straight line, we set aside the length of the neck of the back minus 0.5 cm. We raise the front corner by 2-3 cm. We set the height of the rack according to the model - this value is arbitrary (4-6 cm). And draw a beautiful stand! Also, do not forget to check the height of the rack.

You can often see sweaters and coats with a one-piece stand. Such a cut of the collar fits well to the neck due to the transition of the darts in the line of the stand.

As shown in Figure 3, we will initially set the width of the side (this is the value by which one part of the shelf will go behind the other). Usually it is about 2 cm for the central fastener (buttons in one row as in the photo) and 4 cm for the so-called double-breasted fastener (two rows of parallel buttons). To prevent the collar from cutting into the neck, you need to expand the neck of the shelf and back by 1-1.5 cm and deepen it by 0.5-0.7 cm. We connect the points obtained with lines (red).

We determine the height of the rack. In the example with a one-piece stand, the height of the stand gradually decreases - the largest value is deposited along the middle seam of the back 5-7 cm, along the shoulder cut it is already 4-6 cm. Along the middle seam of the back, we set aside the height of the stand on the continuation of the line, and in the area of the shoulder seam, draw perpendicular to the red auxiliary lines. We understand that the line of transition of the collar to the shoulder seam should be smooth, so we correct the line by cutting off the corners a little (green lines). The final step is to draw the upper cut of the rack, rounding in front.

Now next in line flat collars. Also one of the easiest to build.

Let's pay attention to the jacket in the first photo. Initially, we need to transfer the shoulder tuck on the back and the chest tuck on the shelf into the armhole line - it is much more convenient to draw a flat lying collar. Now we put the back part on the shelf, leading 1-1.5 cm along the shoulder section. Determine the width of the collar and draw it directly on the folded parts (blue line)! Set aside along the middle seam of the back highest value(5-6 cm), slightly less along the shoulder seam (4.5-5 cm) (Figure 4 and 5).

Stand-up collars. Probably each of us has something with such a collar. Most often they can be found in shirts. To simplify the sewing, the collar is made with a one-piece stand.

Let's start drawing a stand-up collar as on a blue blouse. As in the stand collars, we initially draw the length of the neckline minus 0.5 cm in a straight line. From one edge (where the middle seam of the back will be) to set the necessary bend of the bottom line of the collar, set aside 3-4 cm perpendicularly, then the value of the stand (2, 5 - 3 cm), and the so-called "back collar width" (5-7 cm). To draw the front corner of the stand-up collar, set aside 5 cm to the left and about 9 cm up (there may be other values depending on the height of the stand and the width of the flight you have chosen). And we try according to the pattern, we draw a collar !!! The rack can be either detachable or one-piece (Figure 6).

Collar cut shawl. These collars are very effective and not laborious in comparison with jacket collars. The upper collar is cut together with the selection, which greatly simplifies the whole work. So if you want to sew a jacket for the first time, we advise you to start with just such a model.

Pay attention to the configuration of the lines on the last two models of jackets - we see clearly prominent corners. This type of shawl collar is called apache.

Let's make a model design of the shawl collar as on the first model. First, let's set the bead width to about 2-2.5 cm (Figure 7). Now, according to the model, you need to determine the depth of the cut and put a point x. We expand the neck of the shelf (and back) by 2.5-3 cm - we get point a. Then, in the opposite direction, set aside 4 cm - set point b. We connect x and b with a line and continue this straight line a little to the top. The resulting line is called the inflection line of the collar (red). Now we measure the length of the neck of the back and with the help of a compass from point a, we make a notch (point c) on the inflection line of the collar. The segment ac is equal to the length of the neck of the back.

To determine the position of the lower point of the middle of the collar (point d), from point c tangentially set aside the value of the collar departure plus 0.8 cm. (For example: the width of the departure is 6 cm, then the segment cd \u003d 6.8 cm). Point d. Now we connect points d and a with a smooth line, we finish the line on the neck - we get the lower cut of the shawl collar.

Set aside the width of the shawl departure perpendicular to the lower cut of the collar (6-7 cm).

The last action is to draw a smooth line top cut shawl collar (green line) from the x-point to the middle seam.

Now let's see what details we got in the end (Figure 8).

Pickup. We need to draw the inner line of the selection, to which the lining is sewn (blue dotted line), we draw it in a straight line, at a distance of 3 cm from the midline, and then with a slightly convex line and finish at the shoulder seam, at a distance of 3-4 cm from point a. We transfer the part onto a separate sheet of paper along the green line, then from point a along the shoulder seam (it is important that there is a right angle in the area of the transition of the selection to the facing of the back (Figure 8a)), along the inner and outer lines of the selection (solid blue and dotted lines) .

The lower collar in shawl-type collars is made detachable. Also, on a separate piece of paper, we transfer the upper part of the collar (green lines) bounded by a blue dotted line.

The shelf is copied completely, only without the lower collar section.

And we saved the most interesting for last!

Jacket type collars. Such collars are made of four parts - the lower and upper collars and two rack parts. Sometimes the racks are made in one piece. The depth of the neckline varies - the first button can be located above or below chest level, or completely go down to the waist. The width of the lapel is also varied - from very narrow to covering most of the shelf. The jacket type collar is a very important element. Such a collar must be made with great care, otherwise appearance of the entire product will be damaged.

Let's make a model design of a jacket-type collar as on the latest model of a jacket made of black fabric with a white print. The first construction steps are very similar to a shawl collar - we draw a side 4 cm wide (if the fastener is double-breasted) or 2-2.5 cm (for the central fastener). We expand the neck by 1-1.5 cm, we get point a. To determine the position of the inflection line of the collar, set aside 1.5-2 cm to the left, set point b. We decide on the desired depth of the cutout and draw the line of the inflection of the collar. From point a we make a notch with a compass, the radius (segment ac) is equal to the length of the neck of the back - we put point c. Then, from point c, tangentially, we set aside the width of the back of the collar plus 0.8 cm. We get point d. We connect points d and a with a smooth line. Now, at point d, we restore the perpendicular to the line da and set aside on it, first the height of the stand (2-2.5 cm), then the width of the collar (4-5 cm). (Figure 9 and 9a)

And now we will need to draw the lines of the departure of the collar, ruffle and lapel. Refer to Figure 11 for an understanding of these concepts.
To more clearly imagine how the collar will look like in the finished product, draw it on the right side on the details of the shelf (blue lines). The depth of the lapel is about 5 cm, the width is set to 7 cm. After we like the configuration of the lines of our collar, we will reflect it relative to the inflection line (green lines). It is most convenient to do this with the help of tracing paper.

Now it remains to draw a complete rack. The upper cut is drawn below the inflection line by 0.5 cm, the width is left 2-2.5 cm (blue line).

Figure 10 shows all the resulting details:

Pickup. It is drawn similarly to the collar of a shawl. Dotted line at a distance of 4 cm from the middle of the shelf.
Collar (lower and upper). Copies completely with the rack.
Shelf. We translate everything, only without a collar.

The topic of collars is voluminous, diverse and quite complex. So, if you have any questions - feel free to ask them in

If you have chosen the style of the collar, then you need to cut and sew it, and then sew it correctly on a blouse, dress or shirt, this is especially important if the collar is under . The method of processing and sewing method depends on the shape of the collar. Collars are always made double, for this they are immediately cut out on fabric in two layers, but the collar should be 3 mm smaller at the bottom, and the toe line, this is done so that the corners of the collar do not bend up. Sometimes, in order for the collar to be solid, a gasket is inserted into it, the corners are cut off when sewing at the gasket so that no thickening is obtained, then the corners will turn out well and be sharp. When we sweep the collar, we will add an additive in the corners, for round collars we will add an additive on the roundings.

If the collar is round, it can be sewn immediately, we grind other styles with sharp corners in three passes. We start with the line of the sides and make the shape of the corners the same. Then the collar must be smoothed and one side of the seam should be folded over to the lower collar, cut off the corners and turned inside the collar. After that, we sweep the collar 0.5 cm from the edge and mark its middle.

The collar can be sewn using several methods, the method depends on the shape of the collar and the quality of the fabric. You can sew the collar directly to the fabric, to the neckline of a blouse or dress, or you can use a bias tape. To sew a collar adjacent to the neck, we will do this: we apply the sewn collar with the upper side to the inside of the neck of the product and stitch, notch and iron the seam, bending it towards the collar. We fold the free edge of the lower collar by 0.5 cm and close it behind the machine stitches so that it is invisible. If the blouse or bodice of the dress has a clasp in front, at the edges of the collar, notches should be made, which we will tuck inward and close with hidden stitches. We sew turn-down collars together with the collar, laying the collar between the neck and the collar.

Collars can be sewn to the neck of a blouse or dress using bias tape. It is applied to the neck along with the collar. We tack collars with oblique trim to the product, combining the middle of the collar with the middle of the neck of the back, we combine the ends along the sewing line with the middle of the front. We turn the collar inside out along the line of the allowance for the fastener and we take an oblique trim equal to the circumference of the neck and neck. Then we sew the collar, neck fabric and bias trim. Now we turn the collar inside out of the product and tuck along the stitching line and along the edge of the inlay to the product, sew the free cut of the inlay to the product with an inconspicuous seam.

The trend to wear a separate collar over clothes is far from new; since the Middle Ages, fashionistas and fashionistas have paid great attention to starched racks and demonstrated neat overhead collars.

Modern needlewomen, lovers of original things and exclusive accessories, have gone much further in their fantasies and skills, thinking about how to sew a collar. In many ways, talented designers come to the aid of modern fittings, an endless variety of goods for needlework. Therefore, making overheads today is not so much difficult as exciting and interesting.

How to sew a collar will be interesting not only for a professional designer, but also for a novice amateur. Performing this detail in different techniques, you can independently choose the level of complexity and try to create your own cute gift for yourself.

Well, let's consider how to sew a collar, and what variations of it exist.

One of the methods, the easiest and fastest, is to decorate a ready-made collar from an old shirt to your taste. For this, a classic shirt with a stand-up collar is very suitable.

So, you need:

Find a shirt that matches the color and style,

Carefully cut off the collar from the main part of the product,

Process the cut edge manually or on a typewriter - the basis for creativity is ready,

Now the fun begins - decorating the collar and turning it with the magical movements of your hands into a work of art and a beautiful elegant accessory.

There are an infinite number of options here: you can play on contrasts, you can decorate the collar in one color scheme, playing on the overflow of halftones of the material with which you decided to decorate. It can be beads, large pearl beads, rhinestones, small and large sequins, handmade or cross-stitched. You need to imagine what clothes you are going to wear the finished product with. With or as an addition to a casual pullover.

The next option is a little more complicated, it is how to sew a collar yourself.

In order to create from scratch with your own hands, do the following:

Copy the inside of the collar and the collar from the drawing. Check the length of the top cut of the collar. Adjust the cuts at the fillets and specify the direction of the warp thread
Figured rack, one-piece cut with a shelf and back
This model with a curly one-piece stand looks especially impressive. Thanks to such original details, the product acquires fashionable ease.

Cut the shelf from the neck to the point of the center of the chest. Connect the sides of the chest tuck; Transfer 0.7 cm of the chest tuck solution to the neck to increase it, temporarily transfer the rest of the solution to the waist.

For this one-piece collar, expand the neck of the front and back by 2 cm along the shoulder; deepen the neck in the middle of the shelf by 1.5 cm and in the middle of the back by 1 cm. Draw a new neck line, on the back - at a right angle to the center line. Draw auxiliary lines through the extreme points of the new neck of the shelf and back

From the top of the new neck of the shelf and back, draw perpendiculars to the auxiliary lines, along which set aside the height of the rack - 4 cm. Extend the middle line of the back up and set aside the height of the rack along it - 4.5 cm.

Draw the top section of the rack. Draw a collar on the shelf in accordance with the model (see drawing).

From the point in the middle of the section of the upper cut of the collar on the back, draw a cut line to the end of the tuck on the bulge of the shoulder blades
Details of the curly stand cut

Cut the back along the cut line to transfer the tuck to the bulge of the shoulder blades. Transfer the tuck to the bulge of the shoulder blades to the upper cut of the rack.

After transferring the tuck to the upper cut of the collar on the back, add 0.7 cm to each side of the tuck, this will further expand the collar at the back. Shorten the tuck for the bulge of the shoulder blades to 9-10 cm from the neck of the back.

Copy the inside of the collar and the collar from the drawing. Check the length of the line of the upper cut of the collar. Adjust the cut lines at the fillets and indicate the direction of the warp thread
Rack, one-piece cut with a shelf
This model shows the construction of a rack, one-piece with only a shelf. The advantage of this type of collar is that you can change the length of the line of the upper cut of the collar by changing the angle of the back of the collar.

Connect the sides of the chest tuck and temporarily transfer the solution to the side line.

Expand the neck on the shoulder of the shelf and back by 1.5 cm; in the middle of the back, deepen the neckline by 1 cm. Draw a new neckline on the back at a right angle to the midline

Draw an auxiliary line through the extreme points of the extended neck only on the shelf. Extend this auxiliary line by an amount equal to the value of the length of the new back neck.

From the last point obtained, draw a perpendicular to the auxiliary line 1 cm long (for this model). The larger this value, the greater the angle of inclination of the back of the collar, the greater the length of the line of its upper cut and, accordingly, the less the collar is adjacent to the neck from behind.

Draw a line for the lower cut of the stand-up collar on its back. At right angles to the resulting line, draw the center line of the rack.

From the top of the extended neck of the shelf, draw a perpendicular to the auxiliary line, along which set aside the height of the stand - 4 cm. Set aside 4.5 cm along the middle line of the collar. Draw a line for the upper cut of the collar.
Details of the cut of the rack, one-piece cut with a shelf

A pick-up, one-piece with the inside of the collar, copy from the drawing. Check the length of the top cut of the collar.
Rack, one-piece with shelf and back and shawl lapel
On the basis of one-piece stand-up collars, you can design a variety of models using various forms of the neck, sides, lapels, etc. In the model shown below, the stand-up collar passes into the original lapel, reminiscent of a shawl collar.

Cut the shelf from the neck to the point of the center of the chest. Connect the sides of the chest tuck, transfer 0.7 cm of the solution of the chest tuck to the neck to increase it, temporarily transfer the rest of the solution to the waist.

For this collar, expand the neck of the front and back by 1.5 cm along the shoulder; deepen the neck in the middle of the back by 1 cm. Draw a new neck, on the back - at right angles to the midline.

Draw auxiliary lines through the extreme points of the neck of the shelf and back.

From the tops of the new neck of the shelf and back, draw perpendiculars to the auxiliary lines, along which set aside the height of the rack - 4 cm. Extend the middle line of the back up and set aside the height of the rack along it - 4.5 cm.

In parallel to the middle of the shelf, draw a line for the edge of the side and the inflection of the lapel, mark the location of the buttons. Finish off the lapel and collar.

From the point in the middle of the section of the upper cut of the collar on the back, draw a cut line to the end of the tuck on the bulge of the shoulder blades. This line is needed to transfer the tuck solution to the upper cut of the collar on the back and to lengthen the top cut.
Shawl Lapel Collar Details

Cut the back along the cut line to transfer the tuck to the bulge of the shoulder blades. Transfer the tuck to the bulge of the shoulder blades to the upper cut of the rack.

After transferring the tuck to the upper cut of the collar on the back, add 0.7 cm to each side of the tuck, this will further expand the collar at the back.

Shorten the tuck for the bulge of the shoulder blades to 9-10 cm from the neck of the back.

Copy the inside of the collar and the collar from the drawing. Check the length of the top cut of the collar.

Correct the cuts at the mates and indicate the direction of the warp thread.
Cutting stand in a product with lapels
Stand-up collars in products with different lapel options always look unique. If the expansion of the neckline on the front and back along the shoulder line is significant or the size of the collar on the front is very different from the size of the collar on the back, then you should copy the front of the collar and use it when building a detachable stand.

Expand the neckline along the shoulder of the shelf and backrest by 2.5 cm, deepen the neckline in the middle of the shelf by 4.5 cm and in the middle of the backrest by 1 cm. Draw a new line for the neckline of the shelf and backrest.

Parallel to the middle of the shelf, draw a line on the edge of the board. Draw the fold line of the lapel and mark the location of the buttons/loops. Draw the contours of the lapel and collar on the shelf.

Build a detachable stand-up collar based on a right angle. To do this, measure the length of the new neck of the shelf and back and set aside the resulting value along a horizontal line from the starting point. From the point obtained, set aside 3 cm vertically to determine the amount of rise in the front of the collar and draw the lower section of the stand.

The height of the collar along the midline is 4 cm. Copy the front part of the collar from the drawing of the shelf and combine it with the drawing of the collar (shaded area on the drawing of the collar). Finish the collar cuts.
Details of the cut-off stand in a product with lapels

Copy the collar and collar from the drawing. Check the length of the top cut of the collar. Increase the size of the outer part of the stand-up collar by the size of the edging of the overcast seam.

Correct the cuts at the mates and indicate the direction of the warp thread.
Cut-off post built on a greatly enlarged shelf and back neck
If the product model has a greatly enlarged neck and a high stand-up collar, then such a collar is first drawn on the front and back, then the constructed parts of the collar are copied and combined to obtain a separate collar detail. In this way, a collar is obtained, the shape of which is adapted to the model neck of the product.

Connect the sides of the chest tuck, temporarily transfer the solution to the waist.

The length of the shoulder of the shelf and back in this model is 2 cm. Draw a line of the model neck in accordance with the drawing. This line is also the bottom cut of the collar.

At a right angle to the lower cut of the collar upwards, draw a line corresponding to the line of the middle of the shelf on the collar 7 cm long. Draw the contours of the collar fastener parallel to this line.

At a right angle to the lower cut of the collar from the shoulder of the front and back, draw the sides of the collar parts 7 cm long.

Extend up the middle line of the back and set aside the height of the stand - 7 cm along it from the model neck. Draw sections of the stand-up collar through the obtained points.

Details of the cut-off stand

Copy the parts of the collar from the shelf of the back, combine them along the lines of the sides - a detail of one part of the collar is obtained. Copy this part of the collar and draw an angled seam allowance for the collar closure.

Correct the cuts at the mates and indicate the direction of the warp thread.
Cut-off stand of soft form, cut on an oblique, in a product with lapels
For this model, the stand-up collar is cut out in one piece along the line of the upper edge in the form of a rectangle. The collar is cut out in the oblique direction of the warp thread. When stitching the finished collar into the neck, its lower sections are slightly stretched. Thanks to this, the collar beautifully wraps around the neck. The length of the lower cut of the collar is determined in the drawing.

Connect the sides of the chest tuck, temporarily transfer its solution to the side line.

The length of the shoulder of the shelf and back for this model is 2 cm. Draw a line of the edge of the side at a distance of 8 cm from the middle of the shelf. Draw a model neck in accordance with the drawing.

Draw on the shelf the contours of the collar and the curly insert of the shelf, one-piece with a lapel and a selection. Draw the back of the collar on the back according to the drawing. Stand-up collar height - 7 cm.

Measure the length of the upper sections of the collar parts on the front and back.
Details of the cut-off stand of a soft shape

This stand-up collar is cut out in the oblique direction of the warp thread, one-piece along the fly away, in the form of a rectangle. The length of the lower cut of the collar is equal to the length of the upper cut of the parts of the collar on the front and back, which is measured in the drawing.

The curly insert of the shelf, one-piece with a lapel and a selection, is copied from the drawing and mirrored with respect to the fold line. Connect the sides of the chest tuck.

Correct the cuts at the mates and indicate the direction of the warp thread.

These decorations are again present in the haute couture collections presented at Fashion Weeks in Paris, London, Milan, New York, Berlin, Moscow, Barcelona ... The only update of the trend, perhaps, is the emphasis on stand-up collars or stand-up collars . But Russian women, with less sharp and more pretty features, no doubt, should not refuse turn-down collars, chokers and collars in the form of frills or a collar with a jabot. In addition, they are crocheted, weaved from beads, pearls and chains.

One of the reasons for the popularity of these decorations is that they are quite easy to make with your own hands at home, and in addition, they provide unlimited scope for creative imagination. But the main thing - you do original decoration, which becomes the highlight of your chosen image.
Collars-necklaces can be of very different shapes, they are also decorated in a variety of ways.

You will need:

sequins
Swarovski crystals
beads
large beads
raw semiprecious stones
pearls
chains
lightning
blocks
rivets
buttons
ribbons
braid
lace
brooches
coins
decorative fabrics.

By the way, the collars of shirts and dresses decorated with the above elements are a separate issue. Detachable necklace collars are considered super fashionable.
Our website already has a detailed step-by-step, as by all rules sew a separate collar with a stand from a regular shirt.
In this master class, the edges of the collar are trimmed with serrated braid, this is just one of numerous options decor start. Other braids and ribbons are also suitable for finishing the edges, for example, ready-made and hand-made ribbons with rhinestones sewn or glued on them, beads, beads, or narrow lace, or ... in general, call on your imagination to help.
Next, we decorate the surface of the collar or sew on a decorative brooch, button, rhinestone, etc. instead of a regular button on the collar stand.
The surface of the collar - in addition to the methods described above and below, can be decorated with decorative buttons: for this, you need to bite off the legs of the buttons, level the bottom surface and glue the buttons with a heat gun.
If you have unnecessary stud earrings, then you simply pierce the surface of the collar with them, and on the back of it, bend the ends of the rods with pliers so that they do not scratch your neck.
Volumetric metal blocks are the hit of the season, especially with spikes. An ideal youth decoration for those who wish to demonstrate their desire to isolate themselves from the harsh reality.
The combination of delicate lace and pearls looks very gentle and romantic - perfect for a naive and young look.
Decor from pieces of fur is also in fashion hits, even in summer. Of course, you can’t wear such a necklace on a hot summer day, but on a cool evening it can effectively complement the outfit.

Turn-down collar based on felt

Step 1

According to the template for a round turn-down collar (take a pattern from any Burda model that suits you or directly copy from and adjust to your size), cut out four parts from felt (see fig.), On which, using a heat gun, glue a variety of decorations. The felt will give the necklace the necessary rigidity.

Step 2

Next, you will need a strong chain, which must be glued along the inner edge of the collars, releasing the ends of the chain at the back of the desired length to fasten the necklace around the neck.

Step 3

Now glue the top details of the collars on top. In conclusion, it remains only to beautifully arrange the decor you have at home on the surface of the collar and glue it with a heat gun.

Lace collar necklace with chain, rhinestones and bow

You will need:

four identical chain fragments with large links
small split rings, quantity = number of links of one chain or two, depending on the size of the chain links
decorative clasp for chains
finished ribbon with Swarovski crystals glued to it
lace braid
satin ribbon for a bow.

Description of work

Connect 2 fragments of the chain with rings, passing them through each or through every second link in the chain. Pass a ribbon with rhinestones through the rings.

On one side of the chains connected by a ribbon, sew on lace in a mirror image so that you get a collar. Attach the chains to the front with a satin ribbon bow.

At the back, connect the chains with a beautiful clasp.