Princess frog made of plastic bottles. Do-it-yourself frog from plastic bottles: a master class with video

It is no secret that the main task of crafts is to develop creative notes, to show the child the world that surrounds him. Any such crafts should not be expensive, which is why materials that we can find at home are used. One of these crafts is a frog from plastic bottles. Basically, these products are used in garden decoration as garden figures.

Those who have already tried to create such a frog on their own will agree that there is one minus of plastic products - lightness. After all, when the wind blows, the frog will “jump off” from its place and then it will be difficult to find it. Therefore, it is recommended to fill it with earth or pebbles.

plastic miracle

For many years, many have been decorating their garden plots. Such art came to us from America, where the inhabitants do not have such vegetable gardens as in our country. I really liked this idea, and now many such figures began to appear in the store. But their cost is huge, so not everyone can buy them. This master class will help a beginner understand how you can easily make such a toy with your own hands. In fact, if you follow the instructions, you can easily cope with this task.

What needs to be prepared:

2 bottles, different in capacity (one - 2 liters, and the second - 1 liter, we choose the same in shape and color);
a bottle from which we will make paws;
paints, several colors, must be green;
wire;
scissors;
marker;
strings;
needle;
paint brushes.

Let's start creating a frog. First we take two bottles and scissors, but first we remove the labels. Next, we need to insert a small one from under the bottles into the large bottom. It is worth cutting off not much, because with the help of shortening we can adjust the desired height. But even if too much is cut off, you can still try to use your imagination.

For the paws, you can take a green bottle, in which the color should be even - cut off the lower and upper parts, and then cut it vertically. Look at the photo below how it should turn out. We take a marker and draw paws, then cut it out. But it is not necessary to draw, you can just cut it out by eye. To get a symmetrical second foot, you just need to attach the foot to the bottle and draw along the contour with a felt-tip pen, cut it out.

Now we fasten the resulting paws with a thread, because glue is not suitable for such material.

This is also due to the fact that the threads are more durable and despite the fact that the frog can get caught in the rain, the thread will last for a long time.

These will be only the hind legs, now we need to cut out the front ones as well. To do this, repeat all the previous steps. Now we start painting the frog with green paint. We start painting from top to bottom, when everything dries, we apply a second layer. We leave to dry.

When the paint is dry, we begin to draw eyes, nose and mouth. Some craftswomen not only draw, but also attach more voluminous details. So our frog is ready. You can also make a crown, an arrow, and whatever your imagination allows.

Cheerful frog

The desire to decorate your garden plot appears more and more often among modern gardeners. But buying new clothes all the time is not always affordable, so you can make crafts yourself. This is easy and simple to do if you follow the provided instructions in this master class. Now we will make a funny frog with a cap.

What we need:

two two-liter bottles;
felt-tip pen;
scissors;
dye;
hot gun (you can take threads).

We take two bottles and cut them off, then connect them together with glue. Care must be taken not to overheat the plastic, not to deform. But it’s better to put earth or rubble inside before connecting it - this is done so that the frog does not fly all over the territory later in windy weather.

From the remnants of the bottle, we should cut out the paws and glue or sew them on. You can still leave the length of the foot a little to stick it inside the bottle, fixing it. When everything is attached, we proceed to painting, preferably in two layers. When the paint is dry, draw the face of the frog and make a crown or cap. And now our craft is ready.

Video on the topic of the article

This article presents videos with which you can learn how to make a frog out of plastic bottles yourself.

To make a frog from plastic bottles with your own hands, you need to prepare:

If you want to become the owner of a large specimen, it is better to take two containers of 2 liters each, a more compact frog craft will be obtained from two liter bottles. The shade and shape of the container must be identical.
To form the legs, you will need 1 more bottle, or you can use the remains of the body of the future frog.
The paint is chosen for external work, the craft should not be afraid of moisture. LKM, intended for cars, have special strength. Green color is required, the rest is at the discretion of the master.
If the paint is not spray paint, prepare brushes.
Marker and scissors.
Needle with thread and wire.

Attention! The same color of plastic bottles contributes to a uniform modification of the color of the frog under the influence of the sun. Otherwise, individual elements of the craft may acquire a different shade over time.

creative process

A step-by-step instruction for making a frog includes the following items:

Then an interesting creative process begins, when the craft is given a certain image. Eyes with cilia can be painted with paints or plastic blanks can be purchased at a specialized store and glued on. The mouth is usually decorated with paints or a marker.

Advice! The problem of light weight crafts is solved quite simply. Before the body of the frog is formed from two plastic blanks, pebbles or just earth are placed inside. The heaviness at the bottom will protect the craft from the wind and will not turn it into a travel frog.

Landscaping is a place for creativity, so a princess frog can live on the site. It is also easy to make a crown from a plastic bottle, and then paint it in a golden hue. The part is screwed to the body with wire.

Conclusion

Naturally, one frog from a plastic bottle does not solve the problem of landscape design to decorate the site. Therefore, you should take care of the composition. First of all, it is recommended to make a couple for the princess. Making a male is even easier. Following the instructions described above, at the final stage, a cap made from a cork of a plastic bottle is attached to the head. You can draw a butterfly and the outlines of a tailcoat. Here fantasy knows no bounds.

And of course, you should take care of the surroundings. The easiest trick is to place the frogs on a raised platform surrounded by greenery. With a little effort, you can arrange a dry pond. To do this, pebbles, laid out in the form of a stream or a pond, are painted with blue paint. Complementing the site with water lilies, also cut from plastic bottles, the composition will become complete.

Making crafts from plastic bottles is not only exciting, but also extremely useful. So, it gives the used container a second life and partially solves the actual problem of disposal. In addition, products made from bottles are quite durable, resistant to natural influences and allow the imagination to “unfold”. Of the minuses - lightness, they can be blown away by the wind, but this problem can be eliminated by simply pouring sand or stones into the craft. We bring to your attention a few ideas for crafts from a plastic bottle in the form of a frog. Such frogs can be “settled” in the garden, on flower beds and lawns as decoration, and also used at home as a container for storing various small things.

How to make a frog container from a plastic bottle?

To make a frog, we need:

two green plastic bottles of 1.5-2 liters;
scissors or stationery knife;
one-piece red zipper;
stationery transparent glue;
white thick paper or paper tape;
black marker.

Working process:

Craft from a plastic bottle frog

A child can help you make this frog, who will surely be fascinated by the unusual process of turning an ordinary object into a funny toy.

You will need:

two green plastic bottles;
acrylic paint in black and green;
glue;
scissors;
colored cardboard.

Working process:

Frog princess from a plastic bottle

Similarly, you can make a fabulous frog princess from a plastic bottle by adding a few specific details to it.

To make a frog out of plastic bottles with your own hands, you will need:

two plastic bottles of different sizes (it is desirable that they be larger - with a volume of 2 and 1 l); the shape and color of the bottles must be the same;
1 bottle for making paws;
several colors of paint, including green (it is better to take the brightest one);
wire;
scissors;
felt-tip pen;
threads;
needle;
paint brushes.

How to make a fountain in the country with three different ways, read in .

It is better to choose bottles of the same color only for reasons of difference in shades. Some types of paints, when applied to different surfaces, can acquire different shades, which, as a result, can ruin the entire craft when placed in the sun.

Light can make the product translucent, to avoid this, it is better to apply paint in two layers.

Step-by-step instruction

So, we take two bottles and scissors. First, we remove the labels from them, and then we begin to cut out the bottoms, which we will later insert into each other.

Cut off the bottoms of two bottles and insert them into each other

You can adjust the height of the frog by shortening the parts, so at first it is recommended not to cut off too much material, suddenly the frog will be low. Although, fantasy can manifest itself in different ways.

If you do not want to paint the paws, you need to take a green bottle, the surface of which is desirable to make it as even as possible - remove the bottom and top, cutting it off with scissors, and then make a vertical cut to make a sheet.

Sheet from a plastic bottle for cutting paws

Cut out the frog's foot

The second foot will require some precision, because it must match the size of the first. To do this, you can draw lines with a felt-tip pen in the shape of the first foot on a free piece of plastic, and then cut along the inner line without affecting the line drawn by the felt-tip pen.

We try to cut the second foot so that it is as similar as possible in shape to the first

In order for the legs to be attached to the body, they need to be sewn on. As a rule, glue is not used in such crafts, because a more convenient option is to fasten with threads.

The threads are flexible, durable, and will not collapse after rain, so the plastic bottle frog will last a long time and will not need to be repaired.

We fix the paws with threads

So far, only the hind legs are ready, but the frog should also have the front ones. We repeat the previous manipulations, cut out the paws, sew them to the bottle.

The next step is the coloring of the frog, which is best done in stages. Paint over the top and then the bottom. When the paint dries, repeat the action - this will help the product not shine through in the sun.

Draw frog eyes and mouth

Now the frog is ready, and it will look quite interesting and original.

You will find many interesting and amazing crafts from mounting foam. I think that you will definitely want to create something for yourself. Making crafts from foam is not as difficult as it might seem at first glance, it is important to listen a little to the masters who have already created more than one work. Each master can have his own secrets for making various crafts. Therefore, if you decide to do something, look first and read a few works on our website. After all, the detailed manufacturing process is not described in each article and you may not find something useful for yourself. I really like mounting foam, you can make anything out of it, the main thing is that a little imagination works.
After reading on the Internet about polyurethane foam, I found a somewhat interesting point and now we will analyze it with you. Mounting foam shrinks after exiting the can. First, the foam expands and then solidifies, and only then does it shrink. If the foam loses a lot in volume, its contact ability is disturbed, excessive stresses appear in the joints. The shrinkage value is one of the main characteristics of the polyurethane foam; the smaller the shrinkage, the higher the strength of the joint. The best samples have a shrinkage coefficient of no more than 3%. In cheap foam - shrinkage will be long. If you do not wait a couple of days, and start immediately creating some kind of work, then the putty will then begin to crack precisely because of shrinkage. This should be remembered and known. If you want your craft to serve you for a long time, then you need to wait a couple of days when it shrinks, and of course it is better to use high-quality foam that is not cheap. If you use a bandage on crafts, then it prevents the products from crackling.
I think that you have taken a little bit into service from my short story. Today we will get to know you with another master class, we already know Hope Gulak, this is the manufacture polyurethane foam frogs. This wonderful craft will be a wonderful decoration in your garden and on the playground.

To make a frog, we need:
Mounting foam.
Canisters.
Bottle caps.
Scissors.
PVA glue.
Awl.
Bandage.
Tile adhesive.

How to make a frog from polyurethane foam:
First, we will make a sitting frog, and then a recumbent one, you see for yourself which frog you need more))) Nadezhda also shared with us a master class on making a standing frog, if you need just such a look. We will make the frog itself from polyurethane foam, but first we assemble a frame from canisters, so that we have a sitting frog.

The height of the craft frog will be 70 cm. We involuntarily apply mounting foam to the frame.

When the excess dries, cut off, process with sandpaper and give the shape of a frog.

Then we need our frog to dry well. Let's give her time.

Then we paint, apply yacht varnish and the sitting frog from polyurethane foam is ready.

Now let's make a lying frog.

First we assemble a frame from canisters, wire and plastic bottles.

We apply mounting foam to the frame.

We begin to give shape, cut off all unnecessary, and then process it with sandpaper.

We paint, varnish and the polyurethane foam frog is ready.

Look how cute crafts turned out from polyurethane foam, plastic bottles and canisters at Nadezhda.

Further, if you dream up again, then you can create a fairy tale in the garden, as Nadezhda did. Nadezhda put a sitting frog in a pond and not far away made a little inch out of a doll. Thumbelina's bow and dress are made from plastic bottles, it can also be made from, for example, from plastic bags. I don't know about you, but I really like the works of Nadezhda and, most importantly, that everything is done with love and imagination. Hope we wish you to continue to create beautiful works for your garden and share them on our website)))