Good afternoon, dear friends, today we will learn how to make cute frogs from plastic bottles, which will definitely take their rightful place in your garden. Plus, they are very quick and easy to make.
Garden figurines are expensive, not everyone has the opportunity to buy them, and many fun and interesting crafts for the garden can be made from hand-made materials. Crafts made from plastic bottles will decorate your yard or garden for a very long time.
We have already collected a large collection of various interesting crafts for the garden on our website, from which you are sure to pick up something for yourself. And now we will learn how to make a frog from a plastic bottle. Also be sure to check out other works by this author.

Frog from plastic bottles for the garden

For the manufacture of one frog, we need two two-liter bottles, preferably figuratively even. We cut out two bottoms from plastic bottles and glue them together. You can glue with a hot gun, but the gun will require care. Be careful not to overheat the glue, because the plastic of the bottle from overheated glue will melt or warp. Or you can glue it with glue "Moment", "Titan", "Dragon", etc.. Beforehand, you need to put a little gravel or any other pebbles inside. This is so that subsequently the frogs do not fly around the garden during the wind. Then, from the remaining even middle part of the bottles, we cut out the paws according to an approximate template. On the paws, it is imperative to leave small, as it were, “flags”, with which they will then be connected to the body, and cut a small gap in the body to fit the size of these so-called “flags”. You can avoid this procedure and just glue the paws over the body, but ... the fastening will be noticeable ...
When the blanks for the frogs are ready, we start painting. Elena painted with automotive paint in spray cans, it is much more resistant, does not fade, does not peel off, although it is somewhat no more expensive than ordinary enamel. Elena, in particular, has frogs for 4 seasons!!! They look great!!! When painted, draw a muzzle. Then ... let's make a crown for the frog girl. From the top of the same bottle. We twist the ends of the crown on scissors, like a ribbon. We paint in golden color. We fix it with pistol glue or whatever you have, but we monitor the heating of the glue. Or take glue "Moment", "Titan" or some other.

We cut out a cap for a boy from the bottom of any yogurt cup about 0.4 or 0.5 liters. or a disposable cup of 0.5 liters. We paint in any bright color. We fasten it like a crown ... awry ... Everything, funny, beautiful, funny frogs from plastic bottles are ready, it remains to find a good place for them in the garden. If you have a pond, reservoir, dry stream, etc. it is better to settle our frogs near it.

A small master class on making plastic frogs will show us Eugene. First, we select a suitable bottle, Evgenia used a shampoo bottle. Now we will draw contours on it by eye, you can do this with a helium pen. Next, we cut out what we drew. The plastic shampoo bottle is dense, so the edges of the cut blank are rough and uneven. Using sandpaper or a nail file, we process well all the edges of our frog.

From the remnants of a plastic bottle, cut out the legs of a frog.

Glue the finished, processed paws to the base of the frog.

Let's make fingers for our paws. Take a green self-adhesive film and draw circles of the desired size on the reverse side. For one "finger" we need two circles.

Cut out our circles.

Glue them to the paws on one side and the other.

If you want your frog to be stable, then fill it with plaster. And when dry, cover with nail polish.

We make eyes, a mouth and a nose from a self-adhesive film. All the frog from a plastic bottle is ready.

Frogs from plastic jars

Natalya Plisko also made funny and funny frogs for herself, now we will find out how she made them.

From these materials we will make funny frogs.

Natalya made this frog from a plastic jar of cream. I also found a suitable green plastic bottle from a shampoo bottle), cut out hips and frog legs from it. I fixed the finished thighs on the sides, and glued the paws to the bottom of the jar.
Now we will make a crown for our frog, take a yellow plastic bottle and make a crown from the neck, and cut an arrow from the middle. We cut out the tongue and mouth from red plastic, Natalya used a jar of yogurt.
All the frog from plastic bottles is ready, you can use it to store any little things.

Frog from a plastic jar

This beauty is also made from a plastic jar of shampoo according to MK from Evgenia, you can store cotton swabs in it, for example.
We take a suitable green bottle and cut out a blank from it. Glue or draw eyes, nose and mouth to the finished workpiece. Cut out paws from the remnants of the bottle and glue them in the right place. Another frog is ready.
If we make double-sided tape at the bottom, but the finished frog can be glued, for example, to the sink or near the sink. Put in it the necessary and necessary things. such as toothbrush, cotton buds, shaving machine, etc.

This frog can be perfect for storing any items, various knick-knacks.

To make a frog you will need:
* Plastic bottles of the same shape.
* Sharp knife and scissors.
* Castle.
* Marker.
* Needle with thread.
* Traffic jams.
* Brush and acrylic paints in green.
* Glue.
* Finished eyes, the right size.
* Roulette.

How to make a frog from a plastic bottle:
Making a frog out of a storage bottle couldn't be easier. Look at the photos, they show the manufacturing process. We measure the bottle with a tape measure, then we measure the lock and, if there is too much, we cut it off. We put a zipper on the bottle and sew it to it. Sew on both sides at the edge of the bottle.
now we will make eyes, it is possible from traffic jams and it is possible from a tree. We cut out the eyes of the required size, glue the finished eyes on them and fix them on a plastic bottle.

Another plastic frog

And one more idea of ​​​​creating a frog from plastic bottles. It is done very simply, cut out the bottoms of plastic bottles and connect them together. To make a jar for storing small items out of a frog, use a zipper. We fasten it to the edge of our blanks.

As you noticed, making a frog from a plastic bottle is not at all difficult, and the result is very good. Do not forget that there are many interesting crafts for the garden on the site, where you can pick up the right idea for yourself. For now, everyone, and we are waiting for interesting ideas from you)))

Copyright © Attention!. Copying text and photos can only be used with the permission of the site administration and an active link to the site. 2019 All rights reserved.

Having the necessary tools at your disposal, you can easily make an original frog princess. This craft will help decorate the garden or garden. It should be noted in advance that such a product from a plastic bottle will turn out to be quite light in weight. This can make it more difficult for the frog to be outdoors. True, this problem can be solved if the finished craft is weighted with earth or other material. The following is a step-by-step instruction on how to make a frog, as well as a master class on creating a frisky frog from ordinary and unnecessary plastic bottles, even with your own hands!

We study a master class on creating a frog from plastic bottles with our own hands

To make a frog from a plastic bottle, you will need the following materials:

• two plastic bottles of the same shape and color. It is recommended to choose bottles of different sizes and large volumes. For example, you can use a liter and two-liter bottles;
• you will also need one bottle for making frog legs;
• paints of different colors, one of which must be the brightest green paint;
• aluminum wire;
• stationery scissors;
• felt-tip pen or marker;
• threads;
• needle;
• paint brushes;

When applied to planes of different colors, the paint may acquire different shades, which can lead to damage to the product by sunlight. Therefore, it is strongly recommended to use bottles of exactly the same color when making the frog princess. So that the finished frog does not look translucent in the light, it is advisable to apply two layers of paint to the craft.

First of all, we remove the factory labels from the bottles and rinse the bottles with water or wipe them with a cloth so that there are no traces of glue on them. Using prepared scissors, cut the bottoms of the bottles at a height of about 12 cm from the bottom edge of the bottle. The resulting two segments of the bottles are inserted into each other.

By changing the length of the resulting two parts, you can shorten or lengthen the future frog. But at this point, you should act very carefully so as not to make the craft too short.

When making frog legs, dyeing can be avoided by using a bright green bottle as a material. In this case, you just need to cut the bottle on both sides, leaving a piece of the bottle about 15 cm long. After that, you need to cut the bottle lengthwise with scissors to get a rectangular sheet of plastic.

A sketch of future frog legs is applied to the prepared plastic sheet with a felt-tip pen and cut along the line with scissors. In this case, there is no limit to the imagination and you can draw a wide variety of paws or, in general, cut them out by eye.

In the manufacture of the second leg of the frog, it is necessary to put the finished foot on the remaining piece of plastic and draw around the contour with a felt-tip pen. At the same time, when cutting out the second foot, this should be done along the inner line of the sketch, leaving the line itself untouched. In this case, the dimensions of both finished paws will match.

The legs must be attached to the body of the frog using pre-prepared threads. It is recommended to use threads instead of glue, because they are flexible enough and are not damaged by rain, which will allow the plastic bottle product to increase its “life”.

The next step is to make the front legs of the frog. By analogy with the manufacture of the hind legs, sketches should be applied to the prepared plastic sheet with a felt-tip pen and cut around the perimeter with scissors. Then the front legs are also attached with threads to the “body” of the frog.

After the body and legs of the frog are ready, it is necessary to color the crafts. It is recommended to paint the frog in two stages. After painting the top and bottom of the product, it must be allowed to dry, after which it is necessary to re-apply the paint with a second layer.

The next step is to apply the eyes, mouth and eyelashes to the dried craft with a brush. Alternatively, you can use not paint, but finished parts. In this case, the appearance of the frog will be even more attractive and original.

The finished frog can be decorated with a crown made from another bottle, or with any other original items. The place of the future location of the frog in the garden or vegetable garden can also be decorated with additional decor or painted in original colors.

As a result of manufacturing, a neat, cute and original product was obtained - a real frog princess! Its creation practically does not require any financial investments, because in almost every house of every family there are empty plastic bottles, paints and brushes for drawing by children. Without much difficulty and in a short time, having made several of these frogs, you can decorate any summer cottage, making it more original, attractive and natural.

Video on the topic of the article

Crafts from plastic bottles, do-it-yourself frog princess, how to make a frog from a plastic bottle, a frog in the form of a container with your own hands, toys for children in the form of a frog, tips for making frogs.

Crafts from plastic bottles, do-it-yourself frog princess, how to make a frog from a plastic bottle, a frog in the form of a container with your own hands, toys for children in the form of a frog, tips for making frogs.

Plastic bottles are the most common container for storing a variety of drinks, from milk to alcohol. Most people use them for their intended purpose and throw them away without thinking that a plastic bottle can have many uses. Plastic containers are an excellent material for carrying out many experiments in arts and crafts. In every house you can find a lot of bottles, moreover, plastic is the material that is quite easy to cut with scissors or a clerical knife, it is perfectly painted, glued and melted by fire. It should be noted that such hobbies are an excellent option for recycling plastic containers, it benefits the environment. Do not forget about the durability of plastic crafts. This article on working with plastic materials is dedicated to creating a real fairy tale character. You will learn how to make a real frog princess, which we used to hear about from Russian fairy tales. Moreover, a frog made from plastic bottles is one of the easiest crafts that can be made from this waste material. Container in the form of a frog For the safety of every little thing, you can make a small box in the form of a frog out of plastic. This box will be able to decorate the children's room, and all the little things will remain in one place.
To make a box in the form of a frog, you need to prepare two bottles of 1.5 liters or 2 liters, a clerical knife (scissors), a wine cork, a needle with threads, a zipper, an awl, a marker, thin tape, acrylic paints and glue. Step back about 7 cm from the bottom and wrap the bottle in a circle with tape. If you want to make the box larger, then step back from the bottom a little more. Cut the bottle along the top line of the tape, do it as carefully as possible so that the cuts are even. Measure 5-7 cm from the edge of the blanks and mark the holes for future seams with a marker. The distance between them should be about 1 cm. Make holes on the marks, for this it is most convenient to use an awl. Do the work as carefully as possible so as not to injure yourself. Now start working with lightning. Button it up, then wrap it around one of the frog bases. For a while, stick it to the plastic with adhesive tape. The zipper must be sewn with stitches through the holes made in advance. As a result, fasten the thread and remove the tape. Now unzip the zipper and do the same manipulations with the second part of the box. Take a cork and make eyes out of it in such a way as illustrated in the photo. They need to be painted with green acrylic paint and glued to the box. Leave the product to dry and the frog box will be ready. You can put the little things you need in it. Your attention is presented to another option for making a peephole, so the frog looks very cute.
A simple plastic bottle frog
This version of creating a frog is even easier than the previous one. All you need is one green bottle, well-sharpened scissors, colored paper and glue. Cut off the neck. And cut four legs opposite each other to half the length of the bottle. They need to be bent in different directions. The base of the frog is ready. Now start making parts out of colored paper. Cut out four parts of the paws from green colored paper, you can see an example in the illustration. From paper of the same color, cut out two pieces in the shape of the eyes. Make two more details in yellow or white and glue them in the center of the green eyes. Cut out eye sockets from black paper and glue them on top. You should get such eyes as in the picture. It remains to make a frog smile out of red paper and stick it on a plastic base. The frog is completely ready. Creating a frog princess To create such a frog, you will need two bottles of 2 liters, as well as one half-liter bottle. Additionally, prepare scissors, a small amount of sand, glue, paints, an awl and wire. First, cut off the bottoms of two two-liter bottles, retreating about 10 cm. To make your product stable, pour some sand on one of the bottoms, so the frog cannot be carried away by the wind.
After that, you need to firmly insert the two parts into each other. For a stronger fixation, you can smear the walls of the bases with glue, although the frog princess will be stable without it. The next step is to make legs for our frog. To do this, you need the remains of two bottles. Cut out the paws. Rear - will be with fingers, they are attached on the sides at the back, it is most convenient to use an awl and wire to fix them. The front paws should be in the form of "palms", they are fixed with glue. Look at the picture and do the same: attach them to the two notches on the bottom. Just two real paws will come out.


The princess cannot be without a crown. It is made from a 0.5 liter bottle. It's simple: cut the bottom to the height (you only need the top of the bottle) that the future crown will be and cut the edges with cloves. To securely attach the crown to the head, you need to cut a hole in the top of the frog. The hole should match the neck of the small bottle that the crown is made from. Now grease the edges with glue and insert into the hole. You can leave the crown straight, but move it slightly to the side if you like. You have now reached the final stage. The piece needs to be painted. For these purposes, use acrylic paint. Draw the frog's eyes and mouth. Paint the crown gold.
To make the frog even more like a fairy tale character, make a slit in the mouth and insert an arrow inside. It can be cut from the remaining pieces of a plastic bottle.
Place the finished frog princess on a stone, so she will definitely not get lost on your lawn. If there is any artificial reservoir on the site, this is the most suitable place. Several frogs made of plastic containers will look even brighter and more original. Another plastic frog For this tutorial I used a shampoo bottle. With a gel pen, draw the outlines of the paws, eye and muzzle. Cut out the base of the frog on them. It should be borne in mind that the shampoo bottle is quite rigid, it is problematic to work with it. It will not be possible to cut the edges even, so all cuts must be processed with sandpaper. From the rest of the bottle, cut out the legs for the frog. Also process two paws with sandpaper and glue them to the base. Make toes for paws. To do this, you need a green self-adhesive film. On its reverse side, you need to draw circles of the same size. Please note that you will need two circles to create one finger. Cut out all the circles and glue them on the “fingers” on one side and the other. To make the frog more stable, you need to make its bottom heavier. You can fill it with plasticine, if there is gypsum, then pour it on the bottom and paint over after drying with varnish. Cut out the eyes from the self-adhesive film, glue them on, and your frog is ready. Funny frog from a plastic jar The plastic jar that was used for the cream can also serve as an excellent material for creating a small frog princess. Additionally, the work will need the remains of a shampoo bottle, preferably green, otherwise you will need to use paint. From it you need to cut the thighs and legs for the frog. Attach the hips to the sides of the jar, and the legs are fixed on the bottom. Now for the green princess you need to make a crown. Prepare a yellow bottle and cut out a crown from its neck. From the remains of this bottle, cut an arrow. Make a mouth and a tongue out of red plastic, a yogurt bottle is suitable as a material. Now the frog princess is ready. It can be used to store any small things. Creating another frog This frog is also made from a shampoo bottle. It is good to store cotton swabs, toothbrushes or razors in it.
Cut out a blank from a bottle, as in the previous master class. Pay attention to how the paws are made. Cut out the same ones, having previously drawn them on the remnants with a gel pen. In this master class, applications were made that decorated the frog. If you want to attach this frog-shaped coaster to the sink or somewhere nearby, then use double-sided tape. Fix it on the bottom and put it in the desired place. Making a frog from a plastic bottle and polyurethane foam This idea will easily help transform your backyard. What can decorate the site, if not garden figurines. It is not necessary to buy them, using this master class, try to make a garden frog from plastic bottles with a volume of 5-6 liters. Additionally, mounting foam will come in handy in your work. First you need to assemble the base of the frog. For the torso, you will need a 5 liter plastic bottle. Use a liter bottle as a head, and a metal-plastic pipe for the legs. To decorate the peephole, use caps from five-liter bottles that are attached to the head with self-tapping screws.
Foam the base and give it the shape of a frog, cutting off all the excess.
After that, cover the craft with an adhesive solution, and then process it with putty.
Now prime the frogs.
Paint the frogs and after they dry, put them in the yard.
Create a voracious toy frog Make a toy out of a plastic bottle that will become your child's favorite for a long time. It consists of two parts: the head of a frog with a wide-open mouth, as well as a bright bug on a rope.
Make this craft with your little one. If your child is already older, you can instruct him to make some elements on his own. First of all, draw a line around the bottle with a marker, retreating 20 cm from the neck. Also on this line draw two semicircles that are directed towards the bottom. They should be 3 cm apart. These details will serve as the eyes of the frog. Step back from the ovals 5 cm in different directions and draw the paws. Cut out all the details and bend the eyes and paws outward, paint them with green paint. Draw a line in green, stepping back from the edge of the craft 3 cm. Cut a thin strip of plastic, fold it so that it takes the shape of a tongue, paint it red and glue it to the frog. The bug is made from the remains of a plastic bottle. Prepare a small ball, stick wings on it, also cut out of plastic. Pre-details need to be painted red, add black spots, and you will have a ladybug. Now take the rope, fasten it to the ball with one side, and thread the other side through the neck, and then through the hole in the lid. Secure the rope by tying a knot at the end. Now the toy is ready, in addition to joy, it will help the child to coordinate his movements. Cheerful jumper made of plastic bottles All children love those toys that can move independently. The plastic bottle frog, which is created below, can jump in a funny way if you press it lightly. Steps for making a jumping frog Cut off the neck of the bottle where it meets the cylinder. Now the resulting glass must be cut into 5 strips, the cuts should not reach the bottom by 5 cm. One of the five strips should be 2 cm wider than all the others. Place it under the tubercle of the bottom, which in the future will serve as the nose of the frog. Fold all the strips inward, wrapping them up, your legs will come out. Cut the foam ball into two parts, they will serve as the eyes of the frog, stick them on the sides of the tubercle-nose. Draw pupils, nostrils and a smiling mouth with a marker. You can make a slot in it and insert a plastic tab. The toy is ready. All the toys, the master classes of which are presented above, can please your children, become an excellent decoration for personal plots or become useful in the household.

To make a frog from plastic bottles with your own hands, you need to prepare:

• If you want to become the owner of a large specimen, it is better to take two containers of 2 liters each, a more compact frog craft will be obtained from two liter bottles. The shade and shape of the container must be identical.
• To form the legs, you will need 1 more bottle, or you can use the remains of the body of the future frog.
• The paint is chosen for external work, the craft should not be afraid of moisture. LKM, intended for cars, have special strength. Green color is required, the rest is at the discretion of the master.
• If the paint is not spray paint, prepare brushes.
• Marker and scissors.
• Needle with thread and wire.

Attention! The same color of plastic bottles contributes to a uniform modification of the color of the frog under the influence of the sun. Otherwise, individual elements of the craft may acquire a different shade over time.

creative process

A step-by-step instruction for making a frog includes the following items:

Then an interesting creative process begins, when the craft is given a certain image. Eyes with cilia can be painted with paints or plastic blanks can be purchased at a specialized store and glued on. The mouth is usually decorated with paints or a marker.

Advice! The problem of light weight crafts is solved quite simply. Before the body of the frog is formed from two plastic blanks, pebbles or just earth are placed inside. The heaviness at the bottom will protect the craft from the wind and will not turn it into a travel frog.

Landscaping is a place for creativity, so a princess frog can live on the site. It is also easy to make a crown from a plastic bottle, and then paint it in a golden hue. The part is screwed to the body with wire.

Conclusion

Naturally, one frog from a plastic bottle does not solve the problem of landscape design to decorate the site. Therefore, you should take care of the composition. First of all, it is recommended to make a couple for the princess. Making a male is even easier. Following the instructions described above, at the final stage, a cap made from a cork of a plastic bottle is attached to the head. You can draw a butterfly and the outlines of a tailcoat. Here fantasy knows no bounds.

And of course, you should take care of the surroundings. The easiest trick is to place the frogs on a raised platform surrounded by greenery. With a little effort, you can arrange a dry pond. To do this, pebbles, laid out in the form of a stream or a pond, are painted with blue paint. Complementing the site with water lilies, also cut from plastic bottles, the composition will become complete.

To make a frog out of plastic bottles with your own hands, you will need:

• two plastic bottles of different sizes (it is desirable that they be larger - with a volume of 2 and 1 l); the shape and color of the bottles must be the same;
• 1 bottle for making paws;
• several colors of paint, including green (it is better to take the brightest one);
• wire;
• scissors;
• felt-tip pen;
• threads;
• needle;
• paint brushes.

Read about how to make a fountain in the country in three different ways.

It is better to choose bottles of the same color only for reasons of difference in shades. Some types of paints, when applied to different surfaces, can acquire different shades, which, as a result, can ruin the entire craft when placed in the sun.

Light can make the product translucent, to avoid this, it is better to apply paint in two layers.

Step-by-step instruction

So, we take two bottles and scissors. First, we remove the labels from them, and then we begin to cut out the bottoms, which we will later insert into each other.

Cut off the bottoms of two bottles and insert them into each other

You can adjust the height of the frog by shortening the parts, so at first it is recommended not to cut off too much material, suddenly the frog will be low. Although, fantasy can manifest itself in different ways.

If you do not want to paint the paws, you need to take a green bottle, the surface of which is desirable to make it as even as possible - remove the bottom and top, cutting it off with scissors, and then make a vertical cut to make a sheet.

Sheet from a plastic bottle for cutting paws

Cut out the frog's foot

The second foot will require some precision, because it must match the size of the first. To do this, you can draw lines with a felt-tip pen in the shape of the first foot on a free piece of plastic, and then cut along the inner line without affecting the line drawn by the felt-tip pen.

We try to cut the second foot so that it is as similar as possible in shape to the first

In order for the legs to be attached to the body, they need to be sewn on. As a rule, glue is not used in such crafts, because a more convenient option is to fasten with threads.

The threads are flexible, durable, and will not collapse after rain, so the plastic bottle frog will last a long time and will not need to be repaired.

We fix the paws with threads

So far, only the hind legs are ready, but the frog should also have the front ones. We repeat the previous manipulations, cut out the paws, sew them to the bottle.

The next step is the coloring of the frog, which is best done in stages. Paint over the top and then the bottom. When the paint dries, repeat the action - this will help the product not shine through in the sun.

Draw frog eyes and mouth

Now the frog is ready, and it will look quite interesting and original.