Do-it-yourself denim Christmas tree. Master class with step by step photo

If you have not yet found a use for your old jeans, then we suggest you make such a cute denim Christmas tree from improvised materials.

To make a denim tree you will need:

Denim;

Soft paper;

Wire for the crown;

Barbecue sticks;

Thermal gun;

Denim herringbone step by step:

Make a cone of the desired size out of cardboard, for which fold the bag and cut off its lower part (photo 1-2).


You will also need soft paper, such as toilet paper, which takes the necessary shape well (photo 3). As a wire for the crown, you can use from the old calendar (photo 4).

As a result, you will get a “tail”, as in photo 5. Fill the Cone with paper and insert about 10 barbecue sticks (they are slightly thinner than barbecue sticks) (photo 6). Cut out a circle from cardboard to cover the bottom of the Christmas tree (Pic 7). Make a hole and put on the sticks (Pic 8).


The cone must be completely filled with paper (photo 9). Close the bottom, glue the edges with a glue gun (using another strong glue) (photo 10).


Remove all unnecessary denim, while the more shades the better (photo 11). Cut a circle around the diameter of the bottom (Pic 12). Fold and cut off the tip (Pic 13). It is important not to overdo it so that the hole matches the diameter of the “trunk” (so as not to engage in unnecessary decoration) (photo 14).


Make a "skirt" - cut oblique strips (photo 15). Shake the edges (Pic 16).

Tape the wire with double-sided tape. Wrap with a "shaggy strip" (Pic 17). And then dress the Christmas tree at your discretion (photo 18).


You can, for example, use lace (photo 19) or plain satin ribbon(photo 20). Twist the bundle from the tape and wrap it with threads from denim.

“The skirt is a strip gathered on a thread in the center (photo 21). And then the most pleasant moment follows - decoration with flowers (photo 22) and bows (photo 23).


Decorate the "tail" with three beads (photo 24). Then make a stand for the Christmas tree, for which use a plastic jar from under something (photo 27). Wrap with denim (Pic 28).


Through an equal distance from the bottom, grab with a hot glue gun, that is, mark the folds (photo 29). Decorate from below satin ribbon(photo 30). The ribbon was too wide, so it had to be covered with a denim strip, a fringe was made at the bottom (photo 31). Decorate with a bow (Pic 32) and buttons (Pic 33-34).

If you have not yet found a use for your old jeans, then we suggest you make such a cute denim Christmas tree from improvised materials.

To make a denim tree you will need:

Denim;

Cardboard;

Soft paper;

Wire for the crown;

Barbecue sticks;

Thermal gun;

Denim herringbone step by step:

Make a cone of the desired size out of cardboard, for which fold the bag and cut off its lower part (photo 1-2).

You will also need soft paper, such as toilet paper, which takes the necessary shape well (photo 3). As a wire for the crown, you can use from the old calendar (photo 4).

As a result, you will get a “tail”, as in photo 5. Fill the Cone with paper and insert about 10 barbecue sticks (they are slightly thinner than barbecue sticks) (photo 6). Cut out a circle from cardboard to cover the bottom of the Christmas tree (Pic 7). Make a hole and put on the sticks (Pic 8).

The cone must be completely filled with paper (photo 9). Close the bottom, glue the edges with a glue gun (using another strong glue) (photo 10).

Remove all unnecessary denim, while the more shades the better (photo 11). Cut a circle around the diameter of the bottom (Pic 12). Fold and cut off the tip (Pic 13). It is important not to overdo it so that the hole matches the diameter of the “trunk” (so as not to engage in unnecessary decoration) (photo 14).

Make a "skirt" - cut oblique strips (photo 15). Shake the edges (Pic 16).

Tape the wire with double-sided tape. Wrap with a "shaggy strip" (Pic 17). And then dress the Christmas tree at your discretion (photo 18).

You can, for example, use lace (photo 19) or a regular satin ribbon (photo 20). Twist the bundle from the ribbon and wrap it with denim threads.

“The skirt is a strip gathered on a thread in the center (photo 21). And then the most pleasant moment follows - decoration with flowers (photo 22) and bows (photo 23).

Decorate the "tail" with three beads (photo 24). Then make a stand for the Christmas tree, for which use a plastic jar from under something (photo 27). Wrap with denim (Pic 28).

Through an equal distance from the bottom, grab with a hot glue gun, that is, mark the folds (photo 29). Decorate the bottom with a satin ribbon (Pic 30). The ribbon was too wide, so it had to be covered with a denim strip, a fringe was made at the bottom (photo 31). Decorate with a bow (Pic 32) and buttons (Pic 33-34).

In anticipation of the Christmas holidays, many people buy new Year decoration in shops, boutiques, markets and trading houses. But if you are bored with the monotony of the goods presented, then I suggest you save a little personal money and make something original, unique, with your own hands. The item that is ideal for your New Year's interior, or will be a wonderful, extraordinary souvenir for friends, relatives and acquaintances for the upcoming New Year 2015.
Considering New Year's decorations, photos in the interiors of houses, one can note their diversity, but the main emphasis is always placed on the festive tree, because it is she who carries the unique spirit new year mood. Let's try ourselves in the role of designers, we will create a bright, original decorative Christmas tree made of denim. To create a creative Christmas tree, you need an hour of your free time and your imagination.

Materials needed to create Christmas tree denim:
1. Thick white paper (cardboard) - 1 sheet.
2. Glue or tape.
3. Scissors for cutting.
4. Ruler.
5. Tailor's needles.
6. Denim (two types, light and dark).
7. Threads.

So, how to make a Christmas tree, consider in stages:
1. We take a sheet of cardboard in A4 format. We twist it into a cone - this will be the basis for our Christmas tree.

2. We fasten the edges with adhesive tape or glue it on glue (I have adhesive tape).

3. We cut the bottom so that it is even.

4. Cut 5 strips of denim. I got 2 dark and 3 light strips 6 cm wide each. After we sew the fabric, so that a shuttlecock is formed.

5. We string the resulting blank on a paper cone and fix it with needles.

6. We continue to the end of the Christmas tree, combining colors. We attach a square of denim to the top.

Up