How to draw beautiful frames on paper. Learn to draw and frame

In this master class, you will learn how to make a frame out of paper with your own hands. This is a very simple step by step tutorial that can be mastered in just a few minutes. The main advantage of homemade paper photo frames is the simplicity of materials (we will make them even without glue!) And technology. The craft will turn out beautiful and original, it will look very dignified.

If you need to give someone a photo, make this photo frame with your own hands. You will spend 5-10 minutes of your time, and the presentation will look completely different. The same goes for the idea of ​​decorating the wall with photographs: in order not to go broke on ready-made options, it’s easier to make a lot of paper frames at home and arrange them beautifully on a comfortable surface. By the way, these frames can also be made suspended - it is not difficult to pass a thread through them.

What will we need?

  • frame template
  • cardboard or thick colored paper (A4 will be enough)

How to do?

First you need to print out the frame template. It looks like this.

If you do not have the opportunity to make a printout, then make a template for a homemade paper frame with your own hands. To do this, you need to place a photograph in the center of the sheet and circle its outline (or simply draw a rectangle of the appropriate size in the center of the paper). Then lay aside strips of different sizes (alternating a strip 1.5 cm wide and 1 cm wide). Make indentations at the top and bottom as shown on the template.

First, the short sides are folded, and after them the long ones. We need to insert the corners of the long sides of the paper frame into the corners of its short sides in order to firmly fix the design.

If the paper is very thick and glossy, it makes sense to first insert a photo, and only then fold the sides. So she "sits" tighter. If you are worried about the design, you can drop a little glue or use double-sided tape.

Drawings or cardboard boxes with your favorite motivating quotes are often also inserted into paper photo frames.

In order to learn how to draw a frame in a Word, you need to know where to find this function. In the 2007 version of Word, this key is on the Quick Access Toolbar. The panel, in turn, is located at the top left side, in the corner. Initially, this function is not visible, but this will not prevent us from learning how to add text to frames.

How to draw a frame in Word

Stage 1

Find the Quick Access Toolbar on top of the Word window and right-click on it.

Stage 2

In the menu that opens, select "Quick Access Toolbar Settings".

Stage 3

In the Word options box on the right, in the menu called "Select commands from", you should select "Commands not on the ribbon."

Stage 5

Accept the changes by clicking on the "OK" button.

Stage 6

The insert frame button is now visible on the quick access toolbar. It is necessary to select the text that you plan to frame, and then click on the "Insert Frame" button.

To make changes to the appearance of the created frame, you need to right-click on its border and select the "Borders and Shading" item.

Without knowing exactly, it is rather difficult to guess where exactly this function was sent by the program developers. Logically, it should have been located in the "Insert", but it is not there. Although now we know for sure how to draw a frame in a Word.

Photographs are a repository of all sorts of moments. They keep life itself. That is why always, even in the era of digital technology, people put on the table, place on the walls photos associated with this or that event or person. I don’t want to put memories dear to my heart into a template frame at all. Therefore, the decor of photo frames has always been, is and will be in demand. Decorating frames with your own hands is feasible for almost everyone, it is exciting, makes you feel like a real creator.

As a basis for the work, you can take a cheap purchased frame or cut it yourself out of cardboard.

Types of photo frame decor

  • the first most common way to decorate a photo frame: stick something on it. And this “something” is a boundless sea;
  • paste over in decoupage style;
  • paint in an original way using a variety of techniques;
  • the frame can be sewn from soft materials;
  • cover with knitted fabric;
  • decorate with a cloth;
  • wrap picturesquely with twine, various threads, braid, lace;
  • make from tree branches;
  • it can even be baked (from salt dough).

The list can be continued indefinitely, only the limit of your imagination can limit it.

Pasted decor

You can glue a lot on the frame, everything is determined by the taste and imagination of the master.

Buttons

Photo frames decorated with buttons will look original, especially if you choose them in the same color. However, this is not a mandatory condition. The desired uniformity of color can be obtained using acrylic paint. For example, buttons covered with gold paint will transform beyond recognition, by a lucky chance, an old photo frame that did not have time to get into the trash can.

Beads, rhinestones

Over time, these things accumulate in abundance in every woman. All this can become a unique collection of materials for decorating an elegant frame with your favorite photo with your own hands, it is worth sticking them on a pre-planned pattern, ornament.

Tip: you can use whole brooches, beads, beads, pearls, interesting pieces of glass, fragments of broken dishes, mosaic elements.

natural materials

Tastefully executed frame decor in natural style always attracts attention. After all, we are all children of nature.

Coffee beans, lentils, acorns

Everything can go into action and create unique compositions.
Coffee beans will come in handy not only for making an invigorating drink, they turn out to be an excellent material for decorating a photo frame with your own hands: they have a wonderful smell, original texture, noble color, they do not deteriorate. The work will not take much time either: it is not so difficult to use a glue gun or PVA glue to tightly cover a standard photo frame with coffee beans, which in a new guise is guaranteed to become a leading interior accessory.

Tip: to make the frame made by yourself fragrant, buy anise and star anise stars and find a place for them in the overall decor.

shells

This is one of the grateful materials for decorating a photographic frame with your own hands. For decoration, shells of various shapes and sizes are needed. In addition to shells, it is appropriate to use interesting pieces of glass, sea pebbles and other finds made on the sea or river bank in the inlay.

Paper

When creating an exclusive frame with your own hands, paper can be used, which, in the usual scenario, faces the sad fate of waste paper. Very original photo frames, decorated with tubes of paper from newspapers and magazines that have served their purpose.

They can be either short (glued with the end face) or oblong - we use it in a horizontal position.
Another decor idea: birch bark is a very spectacular type of natural materials. Cut the piece of birch bark into five strips. Four will become the actual frame, the fifth can be made a stand.

Salty dough

You can turn an ordinary photo frame into a designer one using salt dough. Everyone has their own ideas: someone will decorate it with flowers, and someone will blind the name of the child shown in the picture. But first you need to make this very dough: knead it from a glass of salt, two glasses of flour and water. Having achieved the consistency of plasticine, start sculpting the intended decor elements right on the corner of the photo frame - this way the dough will take the desired shape at the base, and it can be glued to the right place without any problems. Put it in the oven for 20 minutes. Cool, glue to the frame and start painting with any paints. You can even limit yourself to one of the aerosol cans. The final stage consists in varnishing (it is better to make two layers) and drying.

Entourage of childhood

If there are daughters in the family, the number of decorative hairpins and elastic bands grows exponentially. Cute trinkets, decorated, for example, with flowers, can get a second life when this idea is implemented. Cut flowers from boring rubber bands. Those that are larger, stick on the upper corner of the frame, place smaller copies below.

The result will be a real flower cascade. You can glue the flowers only on the top, leaving the bottom of the frame intact. After completing this process, place the work under load for several hours. When the flowers are white, the part of the frame remaining free from decor should be covered with silver paint, or green if they evoke associations with a spring meadow.

Decoupage

Before starting work, prepare:

  • frame (not necessarily new, you can just bored);
  • a sheet of sandpaper;
  • glue (if there is no decoupage, dilute PVA glue with an equal amount of water);
  • brush;
  • decoupage napkins, cards.

After that, proceed to the decoupage process itself:

  • Sand the old photo frame first. A new one, if it is not varnished, does not need to be processed.
  • First you need to cut out the desired area from a napkin or card, having previously measured the frame itself, not forgetting the margin needed for processing the edges.
  • With a brush (you can use a sponge), carefully apply glue to the front side of the frame. Then place the prepared image in the right place and smooth it, making sure that all air bubbles come out from under the glued fragment. Do this starting from the center, gradually moving towards the edges.
  • Then, literally for two minutes, you need to put the frame under something heavy, for example, under a massive book.
  • To remove excess pieces of tissue paper, run a nail file along the edge of the photo frame (pressing angle should be 45). In the same way, remove the remains from the central part.
  • Finally, apply another layer of glue and leave the frame to dry.

A rich assortment of decoupage napkins will surely allow you to choose the means to implement the idea and create a unique work.

Another option for decoupage photo frames

Add paint and varnish to the previous set of materials.


Bold and unconventional

  • People who value originality can even use a bicycle wheel that has outlived its time as a frame for photos: select pictures of a general theme, think over a plot, insert a photo between the knitting needles or fix it with clothespins - the original decor is ready.
  • It is not worth guessing how a hunting lover will react to a portrait presented to him in a frame of spent cartridges. Of course, with sincere gratitude.
  • An option for anglers: attach hooks or brackets to the rod, hang photo frames on them with twine or not a thick cable with original marine knots, add a couple of floats.
  • Even an ordinary glass jar can become a creative frame for a photo: place a photo of the appropriate size in the selected container, decorate the empty space in it with sand, shells, starfish, LED garlands or any other entourage close to the subject of the picture.

It is impossible to describe all the ways of decorating photo frames with your own hands: every day the ranks of lovers of this democratic type of needlework are replenished, new ideas are born, which, in turn, become an incentive for further ideas. The creative process never stops.


Many of us keep valuable photographs or memorabilia in our home. Sometimes you want to give them more uniqueness, put them in some kind of frame. Alternatively, you can go and buy a frame for every taste, but if you want to add a twist to your creation, then you can do it yourself. Naturally, you can take as a basis the paper that was lying around in the house, but a do-it-yourself paper frame will be much more effective if you use plain thick sheets. It does not matter what exactly needs to be placed in a frame - a photograph or a children's drawing. The main thing is to know how to do it. You can use plain paper, cardboard, or complicate and make a frame - origami. All effective options with step-by-step photos and diagrams are collected in this article.

Option without glue

Even the simplest photo frames are often made with glue. However, there is a very light framing technology without the use of a large pile of unnecessary materials. Let's just say - a frame according to the template.

To work on a homemade frame you will need:

  • photo paper (thick, multi-colored);
  • scissors;
  • ruler;
  • butter knife;
  • as well as your photos that you want to put in a frame.

So, first we need to print the provided template on colored paper.

A ready-made frame scheme will help save a lot of time. Then, step by step, without much effort, we will put everything together. Place the sheet with the template printed on it in front of you. Cut out the original along the outer solid lines. Lay the DIY frame template in front of you so that the images in front of you are printed side up.

Now fold the remaining lines with a ruler and a knife. Fold the paper inward along the folded marks. Of course, you can use glue here if you can't hold the sides of the frame while folding.

tatyana kerbo

Hello, friends. Many are faced with the problem of how to arrange a corner of children's creativity. I want to talk about a simple and budgetary way to make frames for children's drawings or photographs. I made these in my group. frames in two formats: for kids A5 (half of the album sheet, for older preschoolers A4 (landscape or standard photocopier sheet) It’s time consuming to do it for the whole group at once, so I advise you to involve parents. You can organize a joint master- class Children will draw, and parents will make frames for them drawings!

Required for work: a piece of wallpaper, cardboard, glue, a large ruler, scissors.


Overlay picture(sheet of paper of the required size) on wallpaper


Outline with a pencil or felt-tip pen. If you make a large number of frames, you can use a sheet of cardboard, then you can draw a sheet without a ruler.


We remove the template and draw another smaller size inside the rectangle (we deviate from the original one by about 1 cm, we still need to draw diagonals in the inner rectangle


Then you need to cut the wallpaper diagonally from the center to the corners. (not reaching the larger rectangle).



Then we bend the resulting triangles




We bend the outer part of the wallpaper, trying to ensure that the resulting sides of the frame are the same in width, and glue it.





It remains to glue the back. I use the cardboard from the colored paper packs. Then in the finished frame, even if it is empty, you can see a cute picture. You can use cardboard from ordinary boxes. Then the frame will be very rigid..Important: We apply glue on three sides so that you can change the work. In the center around the hole for drawing apply strips of glue on the long and short sides. They are needed to drawing is not"failed" inside the finished framework. I showed the gluing lines with a marker. If it is hard to see, in the center on a napkin duplicated


IMG]/upload/blogs/6bc1a82914e9567de04fa91f93f407bb.jpg.jpg Everything. The house for your masterpiece is ready!



You can glue a loop of braid on the back and attach picture frame directly to the wallpaper with a simple sewing pin. In our dressing room, ceiling plastic cornices are used as shelves.

Up