How to unravel an old thing, bleach and straighten the yarn. Any knitted thing can be dissolved into threads? How to dissolve a knitted thing

Before dissolving old thing, wash it. Loose straps, pockets, buttons. Then dry the item, but not dry.

Determine how the thing is connected - from the bottom up or from the top down. In the first case, the collar is first torn off, then the sleeves, the shoulder and side seams are ripped open. On each part, the end of the thread is found, and dissolution begins from it. If the thing was knitted from top to bottom, then the end of the thread will be at the bottom.

When unraveling, wind the thread first into loose balls, and then rewind into skeins. Separate less durable threads immediately - it is better to use them for the back, and more durable threads for sleeves and front. Throw away the worn places, tie the rest with a flat knot, as indicated in the diagram. The ends of the threads must be at least 2 cm so that they can be crocheted when knitting.

You can connect the ends with a needle: stitch the end of the thread with a needle, remove the needle and cut the ends of the threads. But this method is only suitable for thick yarn.

As for the felted woolen things, the matter is more complicated. It can be impossible to restore their original appearance, it is difficult to dissolve a thing in order to tie a new one. But still try to soak it for 15-30 minutes in this solution: 10 liters of water, 3 tablespoons ammonia, a tablespoon of turpentine, 2 tablespoons of vodka. If that doesn't help, then nothing else will.

How to straighten used thread

Wool knitted things are very practical, they are worn for a long time, old clothes you can dissolve, make skeins, wash the yarn and use it again for knitting. If after washing the thread continues to curl, then it is necessary to straighten it, otherwise you cannot knit from it: the loops turn out to be uneven, loose and the knitted fabric will be careless.

To straighten the thread, tie wet skeins to the rope and hang a weight from each bottom. Change the position of the skein from time to time: gradually move the lower part up - the thread will straighten out under the weight of the load.

There is one, in our opinion, a very witty way. It is necessary to thread the end of the thread into the spout of the kettle (using a hook), pour water into the bottom of the kettle and bring it to a boil. And then rewind the threads, stretching them in this way over boiling water. In order not to burn yourself, the kettle must be closed with an inverted lid. In this case, things go faster, and the threads become fluffy.

How to comb things knitted from fluffy wool

Since the fibers of the yarn will cover the pattern, it makes sense to comb only a flat surface.

It is done like this. First, the thing must be moistened by wrapping it in wet terry towel leaving it like this for about half an hour. Then, with a metal brush, begin combing the surface of the canvas from top to bottom, from bottom to top, from right to left and from left to right. When there is enough pile, comb it for the last time in the direction you need.

If the collar of the sweater is not very stretched and has a presentable appearance, the best way out is to make it shirtfront for the cold winter. A hat cut from the bottom of the sweater will create a winter ensemble.

An interesting solution would be to make a warm, cozy sweater skirt . Most likely, this skirt will suit my daughter - it will turn out not very long and, perhaps, not wide enough for you.

popular now and knitted covers both for household items and for various gadgets.
It is quite possible to make a cover for a heating pad from a small sweater - it is very convenient when it heats evenly, and does not burn.
A cup in a knitted cover will keep the drink warm for a long time. And the cover is easily made from a regular sweater sleeve.

And if you want to do more fundamental work and you have a lot of unnecessary sweaters, I advise you to do warm, cozy blanket . Cut your material into identical squares, sew, combining by color. The lining will give the plaid a finished look. I want to give one piece of advice. Before cutting sweaters, wash them in hot water in washing machine. You will lose a little in size, but the cut squares will definitely not bloom :)

And finally, one more idea that I came across on the Internet. Thin wool sweaters turn into yarn . No, not unraveling the thread, but cutting into strips and subjecting to simple processing. Watch the video, it explains everything in detail. Such thick woolen "yarn" can be used for knitting exclusive things. Look at this skirt. Is it really original? Made from an old sweater.

Here is a video on how to turn an old sweater into yarn.

There is a term "frogging" among English-speaking knitters, which can be translated as "frogging", denoting uncontrolled and often emotional loosening of the knitted due to a mistake. But still, how to properly dissolve knitting and facilitate the process of creating a wonderful thing? Norwegian designer Theresa Vinson Stenersen offers not to be led by emotions, but to use such a tricky way.

A needle of smaller diameter. than those on which they knitted, you need to insert under the right handle of the loops of the row. located below the observed error. It is necessary to ensure that the inserted needle passes strictly through the loops of one row.

The second photo is how it should look from the inside.

Now we calmly dissolve those rows that remained on top, and our typed row remains on the knitting needle and nothing will happen to it now. You can knit further.

If the unraveling area is too large, the threads can be wound over the elbow, thus forming something like a skein. This skein can be washed with special tool and carefully, trying not to damage the connected part, hang to dry, you can hang the weight on a clothespin from below. Thus, after drying, we again get an even thread, from which it will be nice to knit something really beautiful!

Sometimes it happens that it becomes necessary to make changes to an already linked product. For example, you want to lengthen a product or remake an elastic band. Or maybe you made a mistake and noticed quite late. If you need to dissolve the bottom of the product, then there are several ways to do this. Let's talk about it.

The structure of knitting the fabric with knitting needles is such that it can be dissolved not only from above from knitting, but also from below. If you need to dissolve knitting from above, then everything is simple with this. Remove the knitting from the knitting needles and pull the thread, unravel the fabric to the right place. But what to do if you need to dissolve the bottom of the product? There are two ways to unfold from below.

For loosening the product, it is better to use circular knitting needles. The product is strung on knitting needles and shifted to a flexible cable. It is more convenient to work with a flexible cable than with a rigid straight knitting needle. The needles should be about 1 number smaller than the needles with which you knitted the main fabric.

1 way. Cut off one thread from the bottom.

Using this method, you do not have to catch the loops and the thread left after unraveling, you can continue knitting. With this method, damage to the thread is minimal. So, let's look at this method in more detail.

2. We string the loops of the row to which we want to dissolve on the knitting needle. This must be done very carefully, without missing a single loop. We insert the knitting needle into the loop from front to back and bring it out from the back to the front between the loops.

Here is what should happen in the end. All loops are typed on a knitting needle.

3. We cut the thread without reaching the beginning of the strung row. It is necessary to leave a little thread so that later it will be possible to tie the ends of the thread for later work.

4. Gently unravel the product, loop by loop. If you have a small width of the canvas, then you will have no questions with blooming. If the width is large enough, then in the process of unraveling the end of the thread will become large and will make it difficult to unravel. In this case, you can cut the thread periodically. Of course, in this case there will be losses in the yarn, but they will not be as significant as if you cut the product. If you do not want to cut the thread, then you will have to put a little more effort to separate the top of the fabric from the bottom.

5. After completing the separation of the upper part of the canvas from the bottom, you have the upper part on the knitting needle and you can continue to work with it.

You have the end of the thread to which you can tie the thread for further work.

You can unravel the bottom part in the usual way by simply pulling the thread. From the bottom you have a whole thread that can be put into further work.

2 way. Cut off the fabric from the bottom.

1. We determine the place to which we want to dissolve.

2. We string the loops of the row to which we want to dissolve on the knitting needle. Instead of a knitting needle, you can use a needle with a contrasting thread and string the loops on the thread. This must be done very carefully, without missing a single loop. We insert the knitting needle into the loop from front to back and bring it out from the back to the front between the loops. With a 1x1 elastic band, you can insert the knitting needle into the wrong loop from front to back, and bring it out from the back to the front through the front loop.

3. After we have scored all the loops, we shift the canvas onto the fishing line. We cut off the bottom of the product located below the row on the knitting needle. Trim very carefully so as not to damage the loops on the knitting needle.

4. We remove all the scraps of yarn and dissolve the product to the knitting needle. If your loops come down during the cutting process, then they will need to be raised onto the knitting needle.

Woolen knitted things are practical, they are worn for a very long time. And in the house there will always be some old, unfashionable, damaged thing. It can dissolve, make skeins, wash, straighten and use the thread again for knitting.

Tips for unraveling old knitwear

matted unravel woolen product so difficult that most often you have to abandon this venture. But try to do the following: prepare a solution for softening woolen things (for 10 liters of soapy water, 3 tablespoons of ammonia and 1 tablespoon of turpentine and wine alcohol), leave the product in it for a day, then rinse in warm water with the addition of table vinegar (1 tablespoon per 1 liter of water). The product is dried and then dissolved.

First of all, you need to skillfully dissolve a thing. If the work was done by hand, then this is not difficult to do: carefully open the seams and find the end of the thread. Usually it is at the top of each part (if knitting started from the bottom). It does not make sense to dissolve a factory-made thing cut from a whole knitted fabric, since there will be a lot of ends. It is more expedient to redraw it and combine it with a woolen thread.